Excellent!! I have been struggling with these plastic nuts for hours. Never thought of cutting it off. Love your video; all others on youtube make it seem SO simple. It is usually not!
You are the man! I just bought a multitool for another purpose and it got its first use on this plastic! For those of you with little room to reach all both sides of the plastic nuts from underneath, you can also cut the plastic tubes off from above the sink. I had to basically cut the two plastic tubes that the plastic was attached to and the tubes (along with the plastic nuts) broke off together.
Luckily, I was able to use the RIDGID 57003 EZ Change Faucet Tool to get the nuts off. I also went ahead and replaced the supply lines while I was at it. I installed a Pfister faucet kit that included a push and seal drain assembly. We'll see how long the push and seal function lasts.
Amazing idea! I didn’t even have to cut it all the way off! I noticed it moved when I made the first mark in it and could just unscrew it once the pressure was released.
Wish I would have looked up videos before wasting an hour and a half trying to get that dang thing off! Got it off in seconds with that tool! Thanks for posting!
I think those plastic nuts are a conspiracy by Big Basin Wrench to sell us useless basin wrenches. Tried to change my bathroom faucet. After fighting with those nuts I find out I need a basin wrench. I buy a basin wrench thinking my problems were solved. Nope, after fighting each nut for hours all I managed to do was break the wings off. Resorted to a dremel though even that isn't ideal given the space constraints.
Great video, I had same problem; I use similar tool that first try, plastic nuts were damage. First I tried use my Dremel with a disc and it work but use the extension shaft with disc ,was the answer. Again thanks for your video.
Thanks for taking the time to make this video. I ended up using the same power tool because there was no way I was getting them off any other way.👉👈👍👾 subscribed ✅
My situation exactly. I bought a Rigid EZ change faucet tool, but it just bent the fins as shown. I guess I need to buy one of those Milwaukees tomorrow.
There are far cheaper oscillating multi tools then this one. Every tool brand makes them, but I consider the M12 milwaukee fuel one the best you can get. M18 is too big and overpowers small jobs. M12 is nice and light, lowest vibration of any of them in your hand. With the small batteries you can get in some pretty tight spots
My 1st thought when I changed mine was you can’t be tight if it’s liquid. Then thought wood and fire wasn’t such a good idea . Was great excuse for a new tool !!!
I recently encountered this problem and used a hole saw on my cordless drill. Put the pipe right inside the saw and drilled until the plastic flange was separated from the threaded plastic part. Lifted the faucet and knobs right off from the top. Took 90 seconds.
Just did this proj earlier and wish i had a cutter.. i basically chiseled ea side of nut with a scraper and small hammer lolol and yes took about 2 1/2 hrs. 2nd nut was even harder than the first. I did think of drilling into ea end but didnt want to pierce my sink. I had the rigid version of nut tool, but once you snap those four sides, you improvise. Awesome vid, def will invest in an oscillator for future projects.
Faucet change out tool. They are also useful for tightening supply hoses and such. interchangeable/reversible ends for different sizes. Sorry for the late reply and good luck! Here's a link to the one I have, but I'm sure there's many different brands, they're all probably close to the same. www.lowes.com/pd/Kobalt-Faucet-Change-Out-Tool/1002797772
this costs 200 dollars itself. most home-owners wont have this. can i use a drill with bits instead ? the same bits used to go into a dry wall for example.
Well, I'm not just a home owner, so my tools are professional quality. If you want a nice one you've got to pay to play. However, if you want one at a throwaway price, harbor freight sells one for $16.99. www.harborfreight.com/2-amp-variable-speed-oscillating-multi-tool-57808.html?ccdenc=eyJjb2RlIjoiOTYxMzY4MjUiLCJza3UiOiI1NzgwOCIsImlzIjoiMTYuOTkifQ%3D%3D&campaignid=19231709222&adsetid=141253622861&product=57808&store=3427&gad_source=1&gclid=Cj0KCQjwk6SwBhDPARIsAJ59GwdXwuoL_XNJAqyewh3w9sem2bC_Zno9P5QK4r1FgLgXARlzzlgcrwkaAsPrEALw_wcB
@@tonydelbert1358 thanks so much. Just wondering - i have a 8 volt drill with drill bits. Do you recommend a drill with bits for breaking through the plastic ?
😂😂😂 when all else fails cut it off lol 🫡 assignment understood. Having the same freaking problem cussing the heck out of whoever installed my kitchen sink for the last hour and have seen this tool used twice now for sink issues guess that means another investment for this girl
Can’t buy an eye but fingers grow back had me rolling 😂
Excellent!! I have been struggling with these plastic nuts for hours. Never thought of cutting it off. Love your video; all others on youtube make it seem SO simple. It is usually not!
Glad it helped!
Thank you. I don’t currently own this tool. But I used a drill bit to make a few holes in the plastic till it broke down.
This is still the most legit way to remove these god forsaken plastic nuts. Thanks for sharing.
It worked!! I can’t thank you enough. I was stumped for hours. You know what you’re doing. Thanks again ❤❤❤
After endless frustration, 2 minutes with a Dremel tool and a carving bit took the damn stubborn nightmares of a plumbing problem right off.
Thanks, you just saved me my afternoon. I took 3 minutes, clever.
You are the man! I just bought a multitool for another purpose and it got its first use on this plastic! For those of you with little room to reach all both sides of the plastic nuts from underneath, you can also cut the plastic tubes off from above the sink. I had to basically cut the two plastic tubes that the plastic was attached to and the tubes (along with the plastic nuts) broke off together.
Luckily, I was able to use the RIDGID 57003 EZ Change Faucet Tool to get the nuts off. I also went ahead and replaced the supply lines while I was at it. I installed a Pfister faucet kit that included a push and seal drain assembly. We'll see how long the push and seal function lasts.
This worked great. Thanks for sharing, love these multi tools
You're a genius man. True American hero!
Absolutely brilliant. Thank you
Amazing idea! I didn’t even have to cut it all the way off! I noticed it moved when I made the first mark in it and could just unscrew it once the pressure was released.
Wish I would have looked up videos before wasting an hour and a half trying to get that dang thing off! Got it off in seconds with that tool! Thanks for posting!
Glad it worked out!
Thank you for this I’ve been stuck for like 3 days man. So thanks for this video
Welcome!
Way easier than drilling holes, thanks.
Awesome! Thanks for the idea!
Awesome solution! Many thanks!
Thank you so much! I’m glad I found your video!!!
I think those plastic nuts are a conspiracy by Big Basin Wrench to sell us useless basin wrenches. Tried to change my bathroom faucet. After fighting with those nuts I find out I need a basin wrench. I buy a basin wrench thinking my problems were solved. Nope, after fighting each nut for hours all I managed to do was break the wings off. Resorted to a dremel though even that isn't ideal given the space constraints.
this is living hell. Dont have a small cutter tool and these basin wrenches are useless
@@slumy8195 I'll always have a scar on my hand to remind me of the first time I tangled with plumbing 😂
Great video, I had same problem; I use similar tool that first try, plastic nuts were damage. First I tried use my Dremel with a disc and it work but use the extension shaft with disc ,was the answer. Again thanks for your video.
You sir are a freaking genius!
Let's not get carried away now 🤣
Thanks for taking the time to make this video. I ended up using the same power tool because there was no way I was getting them off any other way.👉👈👍👾 subscribed ✅
Thank You Very Much!!!
great video thanks for your help if it wasnt for you i wouldnt have had been able to take it out luckily i had an oscillating tool near by
I heat up a long old flat head screw driver from harbor freight and melt it in half.
We wasted hours listening to other fixes. The oscillator saw worked fast. No damage. Thanks.
Same here. Thinking about trying pvc pipe cutters or something.
Thank you!!!!
Brilliant. I have the threads on my faucet soaking in penetrant right now. I will use this as a last resort.
Thank you!
You're welcome
Angle Grinder on the top side Metal Max diamond blade
Winner winner chicken dinner !!! Whooo - so worked and I have a new power tool !
My situation exactly. I bought a Rigid EZ change faucet tool, but it just bent the fins as shown. I guess I need to buy one of those Milwaukees tomorrow.
There are far cheaper oscillating multi tools then this one. Every tool brand makes them, but I consider the M12 milwaukee fuel one the best you can get. M18 is too big and overpowers small jobs. M12 is nice and light, lowest vibration of any of them in your hand. With the small batteries you can get in some pretty tight spots
Yep this is what im dealing with now.... lucky i already have an oscillating tool.
A wood chisel also works, just need to be careful with fragile sink material.
My 1st thought when I changed mine was you can’t be tight if it’s liquid. Then thought wood and fire wasn’t such a good idea . Was great excuse for a new tool !!!
I find a use for mine literally every day! They're super handy
I recently encountered this problem and used a hole saw on my cordless drill. Put the pipe right inside the saw and drilled until the plastic flange was separated from the threaded plastic part. Lifted the faucet and knobs right off from the top. Took 90 seconds.
That's a good idea as well! As long as you have a deep holesaw bit!
Just did this proj earlier and wish i had a cutter.. i basically chiseled ea side of nut with a scraper and small hammer lolol and yes took about 2 1/2 hrs. 2nd nut was even harder than the first. I did think of drilling into ea end but didnt want to pierce my sink.
I had the rigid version of nut tool, but once you snap those four sides, you improvise. Awesome vid, def will invest in an oscillator for future projects.
Think of it like this, if your labor rate was $75hr, you'd be farther ahead to buy an OMT!
@@tonydelbert1358 true, am in logistics now but been doin all these hvac stuff around house, its an interesting field to get into.
I had the same idea, just not the right tool. Going to try a drill and if that doesn't work, its off to Harbor Freight... ah I mean Home Depot.
What’s the first thing you used? That blue thing? I want to try that first and if not I’ll just buy that saw thingy
Faucet change out tool. They are also useful for tightening supply hoses and such. interchangeable/reversible ends for different sizes. Sorry for the late reply and good luck! Here's a link to the one I have, but I'm sure there's many different brands, they're all probably close to the same. www.lowes.com/pd/Kobalt-Faucet-Change-Out-Tool/1002797772
Thanks for the tip, was having the same problem lucky I had the same tool, cut that sh💩 t out quick.
Glad it worked out for ya!
😂fingers grow back😂😂😂😂
Another tip... If you dont got fancy tools like me, just use a hammer and chizzel to cut it off 👍
220, 221.... Whatever it takes!
Try wd 40 or Liquid Wrench
I don't have that tool hmm. What to do.
Get one lol
this costs 200 dollars itself.
most home-owners wont have this.
can i use a drill with bits instead ? the same bits used to go into a dry wall for example.
Well, I'm not just a home owner, so my tools are professional quality. If you want a nice one you've got to pay to play. However, if you want one at a throwaway price, harbor freight sells one for $16.99.
www.harborfreight.com/2-amp-variable-speed-oscillating-multi-tool-57808.html?ccdenc=eyJjb2RlIjoiOTYxMzY4MjUiLCJza3UiOiI1NzgwOCIsImlzIjoiMTYuOTkifQ%3D%3D&campaignid=19231709222&adsetid=141253622861&product=57808&store=3427&gad_source=1&gclid=Cj0KCQjwk6SwBhDPARIsAJ59GwdXwuoL_XNJAqyewh3w9sem2bC_Zno9P5QK4r1FgLgXARlzzlgcrwkaAsPrEALw_wcB
@@tonydelbert1358 thanks so much.
Just wondering - i have a 8 volt drill with drill bits.
Do you recommend a drill with bits for breaking through the plastic ?
"Fingers grow back"??
What is the name of the tool?
It's an "oscillating multi tool". One of the best inventions ever, incredibly useful!
@@tonydelbert1358 thank you!
the saw?
What sick F designs this S, diabolical
I bought one of those kobolt tools only mine was a ridgid. Waste of money. Ended up taking the sink top off.
😂😂😂 when all else fails cut it off lol 🫡 assignment understood. Having the same freaking problem cussing the heck out of whoever installed my kitchen sink for the last hour and have seen this tool used twice now for sink issues guess that means another investment for this girl