Cycling in Pampanga : DIY bike roller using old bike hubs

During the COVID19 quarantine and lock down, I've got an idea of making a bike training roller using my old bicycle pair of hubs..watch and learn..I hope it will help..enjoy!!!

[@rollsandthepajakeroz5]

Pra po don sa nagtatanong kung bearing po ung hub..yes po bearing po sya..non series shimano hubs po yan..thanks..

[@nestea428]

Rolls and the Pajakeroz pano mopo ginawa yung pinagkabitan sa hubs? Ano po tawag dun?

[@samuelcaguiat3284]

Pede poba kahit na thread type?

[@salazarjustinmard.2143]

ano po yung tawag sa sinasabitan ng hubs?

[@rollsandthepajakeroz5]

Angle bar po yan di ko n po kasi napakita pano gawin..lalagariin lng po gamit ang hacksaw dapat po tama ang sukat sa hub..salamat

[@rodrigowirsch351]

Man, I can thank you enough for this awesome idea, I'll make mine tomorrow. Again, thank you so much!

[@ghoulgaming4317]

Those old hubs are better than my current hubs

[@yfsgcf2717]

ganyan din ang nsa isip kong gawin npakasimple pero da best s lhat, salamat s video.

[@cruzperozo]

Eso quedo espectacular, lo que andaba buscando

[@justinbaylon9638]

Wow Shimano Pa haah

[@bikebikepinas]

Nice tips paps masubukan ko nga gumawa yan

[@mariorodrigovargas-machuca4445]

Amigo, estoy sorprendido, muy hábil tu cerebro, de felicitó, Dios te guarde y cuide.

[@igormrod]

Veeery good ! I have unused cubes here and I hadn't thought of that!

[@marlranle5877]

Ma try nga to..hehe..

[@reyjester383]

I needed it for home. That’s a perfect fit and great price.

[@will153]

Genius and cost effective.

[@dastrevasparaaluz]

Muito bom. Very good
Thank you my brother.
Perfect

[@03dookiedoks]

Magaling magaling magaling..

[@user-ge3pq6zv2b]

I did what it and it worked. I don't know how to thank you. But I have a small question. The tire has become corroded because of the hub shell, so what should I do?

[@egay03]

Nice 👍

[@kreasiumum]

good idea, thanks

[@josearodriguez4000]

GOD BLESS YOU 🤯🤯🤯

[@JirolBikes]

ayos toh

[@rollsandthepajakeroz5]

Thanks sir jirol..

[@falfachannel1114]

Cakep 👍

[@FatvoyTV]

Galing mo idol!

[@rollsandthepajakeroz5]

Thank u sir!

[@lana6335]

Galing!

[@rollsandthepajakeroz5]

Thank you..

[@joebertcarino4513]

Napakaangas🔥rs always.

[@rollsandthepajakeroz5]

Thanks sir..same to you sir,ride safe always..

[@ryanc2115]

mahusay haha

[@rollsandthepajakeroz5]

thank u sir..

[@ulyssesvidal1683]

Muy bueno

[@bombakid8666]

Masubukan nga bukas lods

[@mtbpraktispinoy2543]

Ito ang tunay na DIY

[@rollsandthepajakeroz5]

Thank you sir

[@christophermontilla4748]

Ok ian. Matry ss stock sealed hubs

[@diycraftathome8075]

Lodds minsan sa vlog mo mag kapampangan ka hehe

[@yunusbalc2663]

hello nice system. how is the sound level

[@gosarimalton4851]

May resistance po siya dol? Salamat po

[@triplemoon69]

are they hubs from just the back wheel or is it both?

[@rollsandthepajakeroz5]

both, front and rear hubs..

[@minchofierro8604]

Muy vacano apa

[@ruyvieira104]

Is it possible to balance oneself on that without the front wheel stand thing?

[@rollsandthepajakeroz5]

Negative sir

[@vincentamazona5202]

pramg medjo delikado ata yan paps..pwede agad maoudpod ang gilid ng bike pag nadadali

[@canaveralgeovannic.9821]

Sir baka po pwede maka hingi ng mga napaglumaan mo na bike parts❤️

[@johnmarcsoriano3433]

simple sana kaso bilis makaubos ng gulong ...

[@yaksa8521]

Diba masisira yung hub dyan?

[@rollsandthepajakeroz5]

So far wala pa naman problema hubs mg 3weeks ko na syang ginagamit 2 hrs a day...tsaka naka low speed lng gear mabagal ikot gulong pero mabilis ang padyak..pwede naman lagyan ng grease kung my time po kayo..

[@juliusrodado1771]

Lods ano tawag dun sa color black na pinagkakabitan ng skewers

[@rollsandthepajakeroz5]

Angle bar yan sir..ginawa ko lng kasi yan gumamit ako ng angle grinder dyan.

[@arvinjamesmagpayo5747]

Sayang hubs cassette pa naman

[@The..Butterfly..Effect]

Trainer

[@horus7473]

san ka sa pampanga boss?

[@rollsandthepajakeroz5]

Macabebe po sir

[@horus7473]

@@rollsandthepajakeroz5 layo zer haha

[@arrenlopez9900]

Ask lang po anong size ng tires

[@rollsandthepajakeroz5]

Akin is 700x35c...pag malapad na tires baka mahirapan na umikot sasayad na sa gilid ng hub..2inches lng kasi halos ang luwang ng hubs e.

[@nestea428]

Ano tawag dun ta kinabitan ng hubs?

[@rollsandthepajakeroz5]

Bracket po..ginawa ko lng po yan angle bar..ginamitan ko po ng power tools like drill at grinder..

[@jimmyneutron1686]

Kahoy

[@johnbernal6269]

Hindi po ba mabilis makapudpod ng gulong?

[@rollsandthepajakeroz5]

Hindi naman po basta naka align ang hub sa gulong bago gamitin.

[@joelramlrezrestrepo3219]

Que distancia requiere entre rodillo y rodillo.se que se coloca la llantaencima,pero quiero saber la distancia más recomedable.gracis por todas las demostracioes.

[@cristianjadeangeles6400]

may tips kapa kung di hub gamitin

[@rollsandthepajakeroz5]

yung iba sir bearing tapos pipe..rolling pins yung di na ginagamit...ginawa ko lang kasi itong hubs ko na bike training rollers kasi sayang naman po..

[@rochellequemado5297]

Washout

[@kabanysquit1749]

Pero con el peso no gira

[@jasongomez5085]

Kasya ba sa mtb ito?

[@rollsandthepajakeroz5]

alanganin po sir pag mataba na gulong..35c lng po kasi ang gamit ko dyan e.

[@Sushi-mz4cq]

Ano pong tawag sa pinaglagyan po ng hubs

[@rollsandthepajakeroz5]

Angle bar po yan ginamitan ko grinder tsaka pingputol putol po.

[@Sushi-mz4cq]

Ahh okay po thank youu

[@brianbagatela6946]

Mabigat ba padyakan?

[@rollsandthepajakeroz5]

Low gear lng sir..