several years ago i found one of your videos and it absolutely saved one of my uni assignments. Now I've got a job in industry and stumbled across your videos once again in my time of need. thank you!
Thanks for the lesson! Especially for the newer version of Maya, I just want to make sure I'm not doing anything that has actually been made easier throughout the years so the 2020 update will be a massive relief, thanks again Monica!!
Doing the uvs afterwards is no problem anymore since a couple of maya versions. Just do a projection from x, z or the camera (but no auto projection, then the uv's will be cutted in small patches) to the whole object. In the uv editor select all uv's: CTRL-U (unfold): done.
I did everything you did, my cloth is not moving. I have reset my work space, shut down maya, my pc, re-opned everything, I am following what youre doing step by step but my flag is not moving.
I had this same problem (a year later) still don't know how to get it to work. The only work around I discovered is control clicking the object in the outliner. If anyone knows how to do it normally I'd be grateful to hear it.
Hello Monica, thank you for the tutorial. When I create a plane and then create nCloth, the animation speed is too fast. I increase the number of frames but nothing changes. How can I create a slower animation just like the default speed in this tutorial?
i cant do the part on 3.40. for some reason if i scale the bar down on the second keyframe, the bar also gets smaller on the first. basically i can only animate movement, not scale. does anyone know what i might be doing wrong?
I guess you are also using a newer Version? Im doing it with maya 2024 and i have the same problem, it just doesnt do anything. Tried other Tutorials that use older versions, but it never works. Did you figure it out?
Thank you so much for the tutorial! Question: Can you render out an animation with the lace material on it? I assigned it to the n cloth but it's not see-through.
Thank you so much! Anyone knows why if I save my project with the animated cloth and I close the file, when I open the file again the animation doesn't work anymore?
If I change the animation after applying the ncloth Maya tells me ( Warning: Nucleus evaluation skipped, frame change too large)…how can I avoid that warning?
The top of my cloth compresses fine, but the bottom of my cloth seems reluctant to follow. It leads to a narrower, bunched up top. And a wider, flatter bottom. Any tips?
it's too late i think but by increasing the gravity of your nucleus it should make the curtain moove more (i'm not a pro of physics within maya so i must be wrong :/)
Adding more subdivisions helped a bit for me. Just took the knife tool and threw few loop cuts here and there but would probably be better to add subdivisions in the beginning.
Since it's a plane, it will render both sides. If you want a different texture in the other check out aiTwoSided. Pretty sweet! th-cam.com/video/LBsHYPLZkd8/w-d-xo.html
several years ago i found one of your videos and it absolutely saved one of my uni assignments. Now I've got a job in industry and stumbled across your videos once again in my time of need. thank you!
Fantastic! That's amazing! Congratulations on your gig 🎉🎉
Thanks for the lesson! Especially for the newer version of Maya, I just want to make sure I'm not doing anything that has actually been made easier throughout the years so the 2020 update will be a massive relief, thanks again Monica!!
Thanks for sharing! I hope my videos help demystify Maya :)
I am going to see all your tutorials you know i love watching them and your voice is beautiful ❤️
Thank you so much for these videos!! You explain everything so clearly and go at the perfect pace!
I need a lot of this and here we are with the best demonstrations from Monica
Thank you!!!
You are Maya Guru for us :D Please do not stop uploading
Thank you so much! I really appreciate it! :)
Learnt so much from this tutorial
Perfect pace
Perfect explanations
Thank you for thus
Miss....
Please dont stop making learning video like this forever 😭😭😭😭
Really appreciate and thank you
Doing the uvs afterwards is no problem anymore since a couple of maya versions. Just do a projection from x, z or the camera (but no auto projection, then the uv's will be cutted in small patches) to the whole object. In the uv editor select all uv's: CTRL-U (unfold): done.
You're an awesome teacher! Thank you for these quick and easy to follow tutorials.
thank you for this video, it helped me to understand well, btw u r a cool teacher :)
Your tutorial will make my every day a learning day .
Glad to hear that! Thank you for watching Niranjan :)
I follow all of the steps but when I play it the cloth is not following the movement of the cylinder to create the folds. Why is this?
Amazing and simple tutorial, thank you😊
I did everything you did, my cloth is not moving. I have reset my work space, shut down maya, my pc, re-opned everything, I am following what youre doing step by step but my flag is not moving.
This was really helpful, saved me tons of time, thanks!
Thank you for the lesson! Hello from Moscow!
thank you so much!! this tutorial really came at the perfect time
Very nice and cool presentation M. Thanks. All the best.!
Love your videos! Always so helpful, where do you get the lace texture btw?
when I shift select the cylinder it transforms into vertex mode as well... how should I fix it?
I had this same problem (a year later) still don't know how to get it to work. The only work around I discovered is control clicking the object in the outliner.
If anyone knows how to do it normally I'd be grateful to hear it.
how u shift slect the vertices with an object mode object?
Hello Monica, thank you for the tutorial. When I create a plane and then create nCloth, the animation speed is too fast. I increase the number of frames but nothing changes. How can I create a slower animation just like the default speed in this tutorial?
Ok, try right clicking on your timeline and use playback speed>Play every frame - Max real time. That should do it :)
Wow perfect 👍🏻💓
Thank you! 😊
You're a mastermind :)
I like your all videos it's very useful for beginners, thank you so much , keep uploading new videos.👍👍
very awesome tutorial very helpful i loved it 👍👍👍👍👍👍👍👍👍👍
i cant do the part on 3.40. for some reason if i scale the bar down on the second keyframe, the bar also gets smaller on the first. basically i can only animate movement, not scale. does anyone know what i might be doing wrong?
I guess you are also using a newer Version? Im doing it with maya 2024 and i have the same problem, it just doesnt do anything. Tried other Tutorials that use older versions, but it never works. Did you figure it out?
Thank you so much for the tutorial! Question: Can you render out an animation with the lace material on it? I assigned it to the n cloth but it's not see-through.
Keep uploading stuff like this
More to come! :)
Hey, thanks for this tutorial, can i use the ncloth to model a bed cover, duvet or bedsheet?
Yes you can!
Thank you so much! Anyone knows why if I save my project with the animated cloth and I close the file, when I open the file again the animation doesn't work anymore?
Awesome.... Monica
Thank you so much! :) Glad you liked it!
Awesome. Greetings from Russia :)
Hello there! Thank you for watching!
If I change the animation after applying the ncloth Maya tells me ( Warning: Nucleus evaluation skipped, frame change too large)…how can I avoid that warning?
You are the best 👍
Thank you!! :D
Awesome, easy! Now to rig a tall ship with sails. No thats not a joke.
Sounds awesome! Have fun Jeff!
really helpfull
thanks for the tut
No problem!
Wow so amazing
Thanks a lot! 😊
I find on TH-cam but I can't meet like this. Thank you so much.
Can I use in my animation video like this??
The top of my cloth compresses fine, but the bottom of my cloth seems reluctant to follow. It leads to a narrower, bunched up top. And a wider, flatter bottom. Any tips?
it's too late i think but by increasing the gravity of your nucleus it should make the curtain moove more (i'm not a pro of physics within maya so i must be wrong :/)
Adding more subdivisions helped a bit for me. Just took the knife tool and threw few loop cuts here and there but would probably be better to add subdivisions in the beginning.
Hello mam. I tried the cloth as cape for my character. I animated it to fly very fast but the cloth stretching. It is expanding. Plzz Help me😅
Damn i wanted to make curtain for my scene n haven't touched dynamix.
Thanks for the help
You are so welcome Sarim :)
THANK YOU!
You are so welcome!
How to texture opposite side of that cloth
Since it's a plane, it will render both sides. If you want a different texture in the other check out aiTwoSided. Pretty sweet! th-cam.com/video/LBsHYPLZkd8/w-d-xo.html
💖💖👍
Thank you for watching! 💖
🙏🙏😘
like 43 🔔🔔🔔👍👍🤝🤝
Thank you so much! 👍 I appreciate the support :)
Good lesson!! (like all the other lessons)
Thank you :)