I'm glad you finally went ahead with this serpentine setup 💡 idea looks great. Engine bay will look alot more clean and more area between the radiator and engine pulleys, great work
Just came across this video while looking for ALDA adaptor parts. Have an OM617 motor into an 85 defender 110 and will definitely upgrade to the ribbed belt soon. The alternator configurations are different but will be using the the power steering pump setup to get power steering at the same time.
I have posted and "name dropped" your site on jeep forum, thanks so much for making this adapter for Jeeps, I highly suggest you keep going that direction, I really suggest you make an oil pan and motor mounts for the Jeep wrangersl, XJs and Zjs!
I see you used an AD244 alternator. I'm using AD244 on my QSB3.3 / Jeep ZJ conversion. I like the way you welded the tabs on the base plate. I was planning on using a bar of square stock to fit between the alternator feet. I think I like your method better. Thanks.
Just got the serpentine belt kit for the om617, running the 2 idlers, no vacuum pump, no ac, just power steering pump, alternator, and water pump. Anyone have part numbers for a belt?
Your kit looks very well designed and built. My only concern might be if there is enough belt wrap on the water pump pulley. You have over 180* of belt wrap on both the power steering pump and alternator (which is ideal), and more than 90* on the A/C and crank pulley. It looks like there's only around 40* of belt wrap on the water pump pulley. Do you think belt slip might be an issue there?
I'm in need of the 6 or pref 5 spline pullies for crank/water pump so i can use stock isuzu ac/power steering/alt. I don't think your setup will work for my app..any idea where i can source? And can you tell me what model that short water pump is? Thanks a lot!
referring back to your OM617 remote oil filter adapter plate : the oil filter body assy contains an oil thermostat. do you delete the thermostat and run all the oil through a cooler ? or do you delete the cooler completely ?
The crank assembly is balanced together when the engine is built. So, if you remove any component, like the flexplate, you need to match balance whatever you're replacing it with to be safe.
@@doomsdaydiesel so you need it balanced with the crank or just the flex plate balaced I just bought one on ebay was set up for a boat so I'm sure it's all been changed
@@cocopublicnews6766 you must balance your new flywheel to the old flexplate. Mercedes didn't put witness marks on these flexplates for some reason, so if you already took it off and don't have a reference, you're out of luck.
This is so dialed. I'll definitely be using it when I swap my 4runner
I'm glad you finally went ahead with this serpentine setup 💡 idea looks great. Engine bay will look alot more clean and more area between the radiator and engine pulleys, great work
Definitely a lot more room for activities!
So pumped this is finally ready, will be placing my pre-order shorty!
I appreciate your business as always!
Just came across this video while looking for ALDA adaptor parts. Have an OM617 motor into an 85 defender 110 and will definitely upgrade to the ribbed belt soon. The alternator configurations are different but will be using the the power steering pump setup to get power steering at the same time.
Great kit bro! Good job!
I'd like to see what a compound turbo charged OM617 would be like.
I have posted and "name dropped" your site on jeep forum, thanks so much for making this adapter for Jeeps, I highly suggest you keep going that direction, I really suggest you make an oil pan and motor mounts for the Jeep wrangersl, XJs and Zjs!
Another outstanding video.
Thank you! I will take this as a sign I am improving :D
I see you used an AD244 alternator. I'm using AD244 on my QSB3.3 / Jeep ZJ conversion. I like the way you welded the tabs on the base plate. I was planning on using a bar of square stock to fit between the alternator feet. I think I like your method better. Thanks.
Really professional!
Thank you!
Awesome work!
Excellent design.
This is awesome
I'm glad you like it!
Just got the serpentine belt kit for the om617, running the 2 idlers, no vacuum pump, no ac, just power steering pump, alternator, and water pump. Anyone have part numbers for a belt?
Excellent design and material!!!
Your kit looks very well designed and built. My only concern might be if there is enough belt wrap on the water pump pulley. You have over 180* of belt wrap on both the power steering pump and alternator (which is ideal), and more than 90* on the A/C and crank pulley. It looks like there's only around 40* of belt wrap on the water pump pulley. Do you think belt slip might be an issue there?
I haven't seen any yet. Water pump pulley shouldn't see restriction with no fan on it.
Awesome! Could you include the part numbers for the short water pump, tensioner, and belt? Thx!
They're all linked and explained on the kit's webpage
How much $ for the kit?
Link in description...
@@doomsdaydiesel thanks brother..just found the kit on your site and emailed you. I'm trying not to waste your time.
I'm in need of the 6 or pref 5 spline pullies for crank/water pump so i can use stock isuzu ac/power steering/alt. I don't think your setup will work for my app..any idea where i can source? And can you tell me what model that short water pump is? Thanks a lot!
No he cannot
There isn't much wrap on the water pump. Does it cool okay?
Better than factory
referring back to your OM617 remote oil filter adapter plate :
the oil filter body assy contains an oil thermostat.
do you delete the thermostat and run all the oil through a cooler ?
or
do you delete the cooler completely ?
You replace it. The instructions/diagram are on my website.
@@doomsdaydiesel thank you
What is this I hear about the flex plates and flywheels are being balanced with the engine
The crank assembly is balanced together when the engine is built. So, if you remove any component, like the flexplate, you need to match balance whatever you're replacing it with to be safe.
@@doomsdaydiesel so you need it balanced with the crank or just the flex plate balaced I just bought one on ebay was set up for a boat so I'm sure it's all been changed
@@cocopublicnews6766 you must balance your new flywheel to the old flexplate. Mercedes didn't put witness marks on these flexplates for some reason, so if you already took it off and don't have a reference, you're out of luck.
@@doomsdaydiesel damn
@@cocopublicnews6766 the majority of people don't match balance and they don't have any noticeable issues.
Supercharger 😂
I for sure said supercharger