2002 Jeep 4-inch Rough Country Suspension Lift Kit Full Install
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- We have here a complete and detailed full install video on a Jeep Wrangler TJ 4WD with auto transmission, 4-inch Rough Country Suspension lift kit that fits 1997-2006 Jeeps. We will also be removing a 2-inch Rubicon spacer lift kit to install the 4" lift. We have the upgraded pitman arm also in the build so tune in and check it out,
Thanks for watching and don't forget to Like and Subscribe!
Rough Country 90630 4in Suspension Lift Kit with N3 Premium Shocks for Jeep 97-02 Wrangler TJ
Features: Short Arm
Shocks Included: With Shocks
Max Tire Size: 33
Lift Height Range: 3 - 4.5 inch
Included Parts: Coil Springs, Front Lower Control Arms, Hardware, Rear Lower Control Arms, Rear Track Bar Bracket, Sway Bar Endlinks, Transfer Case Lowering Kit
Rough Country 6605 Drop Pitman Arm for 84-06 Jeep Wrangler YJ & TJ
Drop Pitman Arm: A drop pitman arm helps accommodate steering linkage to your lifted Jeep. By using a drop design, the pitman arm improves turning radius and drag link alignment.
Wrangler TJ Fitment: This Rough Country Drop Pitman Arm is compatible with TJs with 2.5” to 6” of lift.
![[UNCUT] The Loyal Pin ปิ่นภักดิ์ EP.4 (2/4)](http://i.ytimg.com/vi/MN-p1DHjPtI/mqdefault.jpg)
I am so proud of James for being able to do all that and him only being a teenager. Also very informational.
Thanks! this is the most thorough video I could find.
Thank you
Really a nice looking TJ .
Good job James!
When you do a 4 inch lift are you guys doing anything about the driveshaft angle?
We didn't have to do anything with driveshaft angle for this kit, the owner has not had any problems or vibrations
have you seen your front bump stops rub on your springs or worse, forced out because of the interference? we just installed the 3.25" lift kit and saw the same thing. the spring is "deformed" when the axle is fully drooped and the bump stop is almost touching the springs. we are thinking of ordering the upper adjustable control arms to fix this.
Owner did not have bump stops at time of installation and have not heard anything from him about getting them installed
No vibration?
None reported by the owner, and I check in with him periodically
Did the owner have to buy the pitmen arm or was that an upgrade ?
It was an upgrade
Does the suspension articulate good?
I believe so, the owner is really happy with the performance of the kit at this point
how long would you say this took you guys to complete? about to attempt this myself
We took our time so took 10hrs spread over 2 days, but also filming takes more time too
@@BenFierro79 thanks for your response. Got mine done too! Thanks for your very helpful video.