How to Fix Toro Snow Blower Pull Cord
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- How to replace / fix a Toro snow blower pull cord. Pull start broke. You will need a 8 mm flat head screwdriver knife or scissors and small screw driver to hold the recoil from spinning. Spin recoil 5 times to give it enough tension if the pull cord is broken.
How to do an oil change on your snowblower,
• Toro Snow Blower Oil C...
How to change your Snowblowers spark plug,
• How to Change your Tor...
Awesome tutorial. Took me less than 5 mins after I watched your video to do mine. 👍
Thank you very much for this video. It allowed me to fix a friends Toro Power Max 1028 recoil. What I noticed was... how the rope/cord rubs that one side of the hole. I am guessing that this is where the rope/cord starts to wear. I filed the hole to make it a lot smoother... hopefully allowing the rope/cord to last longer. Thank you again... it was so... helpful.
i own the same machine ,5 years old every season the cord snaps after 4 or 5 starts, i've replaced the pricy assembly 3 times, still snaps.
14 below, about 6 plus inches of blowing snow outside and I just broke my pull. Guess what Im doing today. Thanks for the vid.
Thanks for the great video! Fixed the pull cord on my 37772. It still has the electric start, but wanted to make sure I had both starting options useable.
Thank you, I did this today, it broke this morning so I watched video, worked great, I used 550 paracord
Blower cord broke this morning after 10 inch snowstorm... was dreading having to shovel the driveway! Thanks for the video, this looks super easy to DIY fix!
I hope it helps. It is super easy.
Great vid! Saved me a TON of headache. And you’re right, getting that new pull-string back IN was a mutha’!!!
Got my 38840 last year, went to pull start it today (October) to get it ready for the season and the rope broke. Can’t believe that it only lasted a season but oh well. Cheap and easy fix. Thanks for the video.
Mine only lasted for a season too. The new rope I put on seems way stronger. Not sure why the put such a junk rope on from the factory
@@thetoolsman49 By any chance, do you know the thickness of rope you went with? 4 mm?
yeah, mine broke too after 1 and half season.
I own the 1028, it's alot easier then I thought, thanks for the video....
You are welcome! It is pretty easy. O hope it worked out
@@thetoolsman49 I haven't had the need to replace mine yet, but after viewing your video, should not be a problem... Thanks..
It is very easy to replace. I am guessing toro put lock tight on the bolts. That was the hardest part.
Spray nuts/Bolts first with penetrating spray... I have one 10 years old, very reliable!! Luckily after my pull cord broke, right at 3rd job, I used the electric start. Just had to run an extension cord to power. Tried a jump box with 400 watt inverter, that was a NO Go!
Thank you. I did this today following your instructions and it was perfect video!
Hey thanks man for doing this video! I was actually shocked that my cord broke year 2 on first snowstorm but looks like it won't be hard at all! Really appreciate you taking the time to make this video!!
Good luck. This was my second year also. I really like the new cord better.
or if it's shredded near the D handle :
pull it out HOLD IT
cut below the shred, affix the D handle to the end ( make sure to knot it heavily and burn the end of the rope)
Buys alittle moe time
the stress of the pull happens at the top of the cord ......usually.
I’ve been doing it for 60 years I don’t have any trouble putting in a rewind
If you use a pair of players or similar to grab thst end after tieing end knot and really pull that knot tight.. It won't ever ever ever come undone. Just a lil info to help. Also.. I never worry about how many times it wraps around as long as original cord is full length I just measure new cord to same length. Thanks
Thank you forvthe tip
@@thetoolsman49 your welcome sir
Thx for posting the video. Well explained.
great video. Let it snow.
I'm ready ready
To make rope more rigid to push into reel - stifen one inch with super glue
He never mentioned aligning the notches on the drive element with the prongs on the engine, or dressing the exit hole that tore off the cover to begin with so that it is less like to do it again.
General tips, when working outside on a wetish lawn, wear kneepads so you don't have to balance in a crouch. Get & use a magnetic cup for the screws, you stick it to the blower and toss removed bolts in, rather than dropping them onto the lawn where they are a bitch to find.
Cord broke and pulled out, removed the starter assembly, and noticed the starter spring itself must be broken cuz it's not recoiling. Cannot figure out how to disassemble as there's no nut to remove....wonder if I have to replace the whole assembly.....any ideas? PowerMax 826 le
Well my cord ripped right off so I cannot count the # of rotations.
Any idea why the cord frayed that way, or as others reported here, broke? Doesn't seem right that should happen in just a year or two. Is there a rough edge in the opening the cord goes through, or somewhere inside?
Where did you get the replacement cord, and is it something specific to pull starters or a particular type of generic cord?
Not sure why it frayed like that. There was no ruff edges. It broke literally right when I pulled it in the video. I just got a standard cord they sell at the hardware store. They use that cord for all mowers and snowblowers or anything that pull starts. I bought 6 feet for around $5. I feel like the rope I have now is better.
@@thetoolsman49 Interesting. Something to watch for more closely (fraying). I've seen white nylon-braided cords at stores; haven't come across that black with white spiral(?) type. Will be on the lookout to have a length on hand. Thanks
I don't have the original pull cord for by duo stage Toro snowblower. How long should the cord length be?
I have a Toro 721 R. I've removed the bolts from the pull cord housing but there is something that is retaining the unit from being removed. Any idea of what is holding this unit on the Model 38741, Serial Number 315015738 Toro Power Clear 7821 R/E ?
is there a right or wrong way for the tension on the spring clockwise or counter clockwise. I'm going counter clockwise then putting the string in and letting it recoil. is that right?