So amazing and so clever idea! Do you first do the lamination, then painting and last hotcoat? Doesn't painting give you uneven (wavy) surface for/before hotcoat, if so what do you do about it before hotcoat? Or is the amount of paint so small that it doesnt matter? Thanks in advance for everything!
Absolutely Beautiful! It would be a blessing to try and recreate a solid local artist ans Shapper collag once agin. I fell its about that time. we can make more then one, a few.
ABSOLUTELY - SICK. Question - board starts as orange, and then you put the blue on it - how did the board then end up WHITE while still letting the blue show through???
Smalley Not sure what you mean by white? I did a little chop chop editing with different boards. The orange with blue lines, and also a gold and black, and some white boards too. Not exactly in perfect sequence.
I use water based acrylic paints. Interior flat from the hardware store will work. Just water it down some to your liking. Can use rollers, brush or spray guns.
Good morning, complements for your videos, very nice and useful !!! I'm restoring an old kite surfboard, made of resin. At the moment I have carried out numerous repairs with epoxy, fiberglass and mocrosfers, as a result the surface is aesthetically very unpleasant. The original resin was transparent and graphics were integrated between layers. I made the same graphics with the PC, so I can print them by ink jet plotters. At the moment I purchased epoxy and fiberglass to re-laminate the whole board over the existing layers. I don't care about the weight, I wish it will be very strong. I also bought a colorant for resins, white. If you can, I need some advice to finish the work, to give the surf an aesthetic aspect similar to the original: To give a white background, so as to cancel all the remaining signs of repairs, which is better than the following procedures? Procedure 1) - First lamiantion using only one layer of fiberglass and white colored resin - Second lamination with the next layers of fiber glass and trasparent resin and interposing between the layers the printed graphics Procedure 2) - I spread the white resin with brush all over the surface to erase the signs of repairs - Lamination with all the fiberglass layers, interposing the printed graphics Also, do you think for the realization of graphics it is possible to use glossy lucid paper (the kind used for techinchal drawings and china) or if you must use rice paper? Thank you Andrew
greetings from Morocco to all the surfers in the world! ♡peace♡
gigi Almondsbury
😀🌊🏄✌
☮️ peace : )
I wish you could just tattoo these boards like the old days airbrushing! Inner Island guns! Bronzers! Fast and furious!
I love the idea ! Great work, and thanks for the video
That rope paint job is brilliant!
It's a simple idea, but the result looks so complicated and super amazing!
Perfect, really ... great job!
This pain job is so,so cool!!
Hah, that is such a cool idea.
I love the shape I love that it's a fish but the color I would use orange with black pinstripes! Make it a bonzer! Five fin!
So amazing and so clever idea! Do you first do the lamination, then painting and last hotcoat? Doesn't painting give you uneven (wavy) surface for/before hotcoat, if so what do you do about it before hotcoat? Or is the amount of paint so small that it doesnt matter? Thanks in advance for everything!
Ingenious
Keep revisiting this video, still my favorite design.
Absolutely Beautiful! It would be a blessing to try and recreate a solid local artist ans Shapper collag once agin. I fell its about that time. we can make more then one, a few.
Sick!
So amazing
Awesome idea to let the physic do it's work! What product do you use to finish coat the board?
Awesome board by the way ;)
same resin used to glass the board whether it be epoxy resin or polyester
Just curious - have you tried doing that with TWO colors at the same time in the same pendulum swing???
Smalley The artist that did this for me is HOXXOH. You should check out his work. He's the master of the art.
thanks for the video, who is the musician?
nice! respect from russia.
ABSOLUTELY - SICK.
Question - board starts as orange, and then you put the blue on it - how did the board then end up WHITE while still letting the blue show through???
Smalley Not sure what you mean by white? I did a little chop chop editing with different boards. The orange with blue lines, and also a gold and black, and some white boards too. Not exactly in perfect sequence.
C Shapes - MY BAD. I didn't catch it the first time I saw it that it was MULTIPLE boards clipped together in the video.
AMAZING work.
Great tune. Ulrich Schnauss - Monday Paracetamol
Hi, i was just wondering if you have painted the surfboard befofe glassing it. Also what paint have you used when coating the surfbaord ? Thnaks
I use water based acrylic paints. Interior flat from the hardware store will work. Just water it down some to your liking. Can use rollers, brush or spray guns.
C Shapes just to clarify is this on top of the glass before hotcoat
Directly onto the foam first. Then glass.
Were you using poly resin? What type of paint?
+Paul Underpressure Poly resin mostly. Acrylic paint.
how does the stringer stay unpainted?
Great job! Fantastic surfboards! What's the paint in 1:25? it's resin with pigments or other?
Thanks! We used regular acrylic paints.
Show de bola pena que não é aqui no Brasil...
ss
Good morning, complements for your videos, very nice and useful !!!
I'm restoring an old kite surfboard, made of resin.
At the moment I have carried out numerous repairs with epoxy, fiberglass and mocrosfers, as a result the surface is aesthetically very unpleasant.
The original resin was transparent and graphics were integrated between layers.
I made the same graphics with the PC, so I can print them by ink jet plotters.
At the moment I purchased epoxy and fiberglass to re-laminate the whole board over the existing layers. I don't care about the weight, I wish it will be very strong.
I also bought a colorant for resins, white.
If you can, I need some advice to finish the work, to give the surf an aesthetic aspect similar to the original:
To give a white background, so as to cancel all the remaining signs of repairs, which is better than the following procedures?
Procedure 1)
- First lamiantion using only one layer of fiberglass and white colored resin
- Second lamination with the next layers of fiber glass and trasparent resin and interposing between the layers the printed graphics
Procedure 2)
- I spread the white resin with brush all over the surface to erase the signs of repairs
- Lamination with all the fiberglass layers, interposing the printed graphics
Also, do you think for the realization of graphics it is possible to use glossy lucid paper (the kind used for techinchal drawings and china) or if you must use rice paper?
Thank you
Andrew
2:15, seria bom colocar duas pranchas ao lado pra economizar tintas
Sir can I ask what kind of paint did you use
Gold paint is home depot wall paint acrylic latex.
Where u wear mask?
Get all your supplies at www.SURFSOURCE.NET
몰 바르는 거지.
atomiko
Really hate the artsy focus