This is probably the third or fourth video I have come across on such repair in which they are all good but yours is the best because you actually perform a stress test on the glued piece. Thank you dear Cheap Wheels.
I think I see some deep thinking in starting this channel, you now have a reason to pick up all sorts of old vehicles so you can keep fixing stuff. Smart guy, it will be interesting to see how many Ford trucks you can end up with before Brooke says anything. Thanks for sharing.
Its Dave - lets see more Dave on Alone! Maybe you are but only just finished season 5. I found it funny I just stumbled on your page while trying to fix my f150 mirror.
Your video was very thorough. I had a problem with removing the mirror from the mounting piece which you referenced it to a Chinese finger trap. Understood and performed the release. Thanks for the video and now that 2..99 Permatex is now 7.99. Nice mark up for a small tube of adhesive.
My mirror in 95 Ranger fell off about 10 days after I first watched video. I did not hesitate to get it fixed. Normally I would have asked several friends what they recommended. Thanks for your helpful videos.
Important to be aware if you have any tint or UV film on the windshield. I’d imagine that most older cars with that style rear view probably don’t, but just a thought. Great video and another cheap and easy fix. Thank you Dave and God bless!
hey there Dave...you won't believe this but I just bought that same kit to put my rearview mirror back on lol now I don't have to read the instructions thanks for that ;) have a great week & take care
Back around 82 or so I was cleaning out my 74 American Motors rebel station wagon, and I flipped - Frisbee style - an aluminum coke can into the front part of the car (from the rear), and gosh darn it I cracked the front window. Luck of the Irish! Dad bailed me out on that one. Thanks Dad. Bless
@@cheapwheels9828 Around that time my friend Bob mentioned to me that Al Jarreau drove the same car as mine. (Hollywood studio connection). That engine just hummed along, but then the trans went on it.
Times have changed since the days of rear view mirror brackets being held on by screws at the top of the windshield/headliner area.......good video on how to address gluing the newer style mirror mount back on! Thanks!
Now, I followed your instructions completely.... lets see how the repair works out long term. I got 5 or more years out of the last repair, but I didn't study before making that fist repair. I squeezed really hard and had way to little glue, left to hold on. One drop with firm pressure 30 seconds to a minute... give it an hour before installing the mirror. The price now in june 2023 is $7.85 for the .." ALL NEW- Permatix EXTREME STRENGTH glue ". A Bargain still, ...when you get your Rear View back.
Mine fell off again after 2 years. The product has increased in price so much that a brand new upgraded mirror and mount from LMC Truck is only $3 more than the goo alone. Bought a new mirror instead.
Almost all reviews for this product at least here in sunny Australia, are 1 star. Users claim that they followed the instructions properly, but the mirror fell off in a week's time anyway. So now I am in two minds. My rear view mirror fell off today and I am looking for a good adhesive.
I’m having a completely different issue because my button is still attached to the windshield itself. I don’t need adhesive because the button has not fallen off and is glued on there super tight. Whenever I click the rearview mirror back onto the button, it will stay there for a few days before it clicks and falls off. What would you suggest in this case?
It's a good thing my van has two rear view mirrors on the doors . . . my dog gets paranoid that I'm keeping an eye on what she's up to back there when we're headed down the road :) (She's probably the one that knocked my mirror off, in the first place!) Thanks for the tips, Dave! See you down the road . . . God Bless
Hey, Dave! Thanks so much for this video! I'm on the verge of cleaning the windshield with the razor blade. I really like the way you explained every step! By the way, is your button still hanging from this application? Thanks, Dave, so much!
I'm predicting Cheap Wheels will have an upcoming episode titled; "How to replace the windshield on an old pickup truck". But maybe that's just me. Another good video Dave, no idea why it didn't pop up in my feed for an entire day though.
I have had luck with epoxy for an aftermarket mirror I had installed. Permatex failed twice, once while tightening screw and another in summer heat. Cleaned with windex, heard something about windex leaving a residue?? Last time with epoxy used a 70% IPA wipe, so idk what actually made this thing finally stick.
Hey Dave ..... I notice in the beginning of the videos and the end I hear the sound of a vehicle running.... and you drive Fords...... neighbors car? I love your videos. God bless
Thank you. Boy did I not do that right a couple years ago and why I have a jerry-rigged rear view. I'll give it another try. Love these videos. Very helpful.
Does this kit hold to heat? Mines rear view mirror fell off but it took some of the windshield glass too a small piece. What do you suggest to do? Use epoxy?
You think this can be used to glue any material to glass, not just a METAL button? I'd like to use it to mount a DashCam instead of a suction cup mount.
Help Dave...that shiny layer of adhesive is all bumpy and still on windshield...I've tried scraping and good off special epoxy remover....won't budge...It's all bumpy...helllllp
Does anyone know what the rule for the temperature is? The instructions say 50-75 degrees, but the low in Houston is 78 tonight. I need to get this back on, but I don’t want to mess it up. Any help is appreciated!
This is probably the third or fourth video I have come across on such repair in which they are all good but yours is the best because you actually perform a stress test on the glued piece. Thank you dear Cheap Wheels.
Thanks 👍
“I’m not into looking back, but now I can if I have to” 😂
Thanks Dave for the guide.
"I'm not into looking back, but now I can, if I have to."
There's Dave, always finding time to share a life lesson within another lesson.
LOL, Thanks
Lovely, to the point, gives it to ya straight, no shop talk, and doesn't miss a point. Haven't seen anything better on the subject. Subscribed!!
Thanks Dave! Great instructions… by the way todays price for same product at Auto Zone was $8.95!! Can we say inflation!!
I think I see some deep thinking in starting this channel, you now have a reason to pick up all sorts of old vehicles so you can keep fixing stuff. Smart guy, it will be interesting to see how many Ford trucks you can end up with before Brooke says anything. Thanks for sharing.
Oh, there on to me.....Brooke has already said a few things...LOL. Between Michigan and Alaska I have 4 ford trucks, a jeep, and an escort
@@cheapwheels9828 You clearly have a balance problem, you need find another cheap and escort.
Its Dave - lets see more Dave on Alone! Maybe you are but only just finished season 5.
I found it funny I just stumbled on your page while trying to fix my f150 mirror.
I love how Dave is straight to the point and makes everything look easy
Thanks
I paid 9.99. The instructions were daunting when reading. Thank you for making me feel like I can do this.
Good Job Dave. you are no nonsense direct and entertaining. Thank you.
Your video was very thorough. I had a problem with removing the mirror from the mounting piece which you referenced it to a Chinese finger trap. Understood and performed the release. Thanks for the video and now that 2..99 Permatex is now 7.99. Nice mark up for a small tube of adhesive.
I about lost myself when you said “I don’t like looking back. But now I can, if I have to.” 😂
Excellent straightforward instruction.
Thanks Dave.
I have done this one several times. Probably wont be the last.
Glad you enjoyed it
Hello. Good morning. I'm going to try this today. I'll let you know my results soon. Thanks! Great teaching.
Ok, you've shamed me into fixing my mirror on my 91' S10. Great video. I probably wouldn't have read the directions and screwed it all up.🤣
Good luck with it
Perfect demonstration. You’ve got talent, sir! Thank you
My mirror in 95 Ranger fell off about 10 days after I first watched video. I did not hesitate to get it fixed. Normally I would have asked several friends what they recommended. Thanks for your helpful videos.
Glad it helped
5 bucks over here in California 🎯 and am now a follower so to the clear instructions and play by play 👌🏾
I thought you looked familiar. Then i remember watching you build your log cabins hell yea🤙
I love all of your videos! You and Brooke are the best! ❤️🙌🏻
Thank you so much!!
the button comes out....... prolly should have seen this 2 packets ago. god bless my man. have a good day!
Straight forward no BS information time and time again. Thank you!
Thanks
Important to be aware if you have any tint or UV film on the windshield. I’d imagine that most older cars with that style rear view probably don’t, but just a thought. Great video and another cheap and easy fix. Thank you Dave and God bless!
Great point!
hey there Dave...you won't believe this but I just bought that same kit to put my rearview mirror back on lol now I don't have to read the instructions thanks for that ;) have a great week & take care
Thanks Trey
Back around 82 or so I was cleaning out my 74 American Motors rebel station wagon, and I flipped - Frisbee style - an aluminum coke can into the front part of the car (from the rear), and gosh darn it I cracked the front window. Luck of the Irish! Dad bailed me out on that one. Thanks Dad. Bless
I bet you wish you had that car today. I grew up around AMCs and they actually get real money nowadays.
@@cheapwheels9828 Around that time my friend Bob mentioned to me that Al Jarreau drove the same car as mine. (Hollywood studio connection). That engine just hummed along, but then the trans went on it.
Times have changed since the days of rear view mirror brackets being held on by screws at the top of the windshield/headliner area.......good video on how to address gluing the newer style mirror mount back on! Thanks!
Thanks
nice work Dave, just what I needed for the old Bronco
Very nicely done. Worked exactly as described.
Something about the way you produced that crayon from behind your ear just tickled me. 🤭
LOL
Now, I followed your instructions completely.... lets see how the repair works out long term. I got 5 or more years out of the last repair, but I didn't study before making that fist repair. I squeezed really hard and had way to little glue, left to hold on. One drop with firm pressure 30 seconds to a minute... give it an hour before installing the mirror. The price now in june 2023 is $7.85 for the .." ALL NEW- Permatix EXTREME STRENGTH glue ". A Bargain still, ...when you get your Rear View back.
Great job Dave. Clear and straightforward!
Thanks man, always makes a lot more sense when I can see it done
at 1:03 that's what she said, I couldn't resist 😂😂😂 - no offense. Awesome Tutorial
I always put a piece of tape over the metal after you glue it too the window..it works for me. Great video
Great tip!
Mine fell off again after 2 years. The product has increased in price so much that a brand new upgraded mirror and mount from LMC Truck is only $3 more than the goo alone. Bought a new mirror instead.
I have used that before. It's a great product. Nice video.
Thanks
I love that “Keep your junk on the road” line lmfao
Thanks
All I wanted was an answer, the whole answer and nothing but the answer and that's exactly what you provided.
Great job!
Thanks!!
Glad it helped!
Did you say 2.99 its 7.99 now. Thanks for the video very helpful!
Bidenomics
Thanks for sharing the great tips with us.
My pleasure!
Almost all reviews for this product at least here in sunny Australia, are 1 star. Users claim that they followed the instructions properly, but the mirror fell off in a week's time anyway. So now I am in two minds. My rear view mirror fell off today and I am looking for a good adhesive.
Great video Dave
Thanks 👍
Thanks Dave! Another fine job.
Glad you enjoyed it
Gracias, mi estimado.
El video explicativo.
Ya, ahora me oriento de manera visual ahora viene la practica.
Saludos.
I’m having a completely different issue because my button is still attached to the windshield itself. I don’t need adhesive because the button has not fallen off and is glued on there super tight. Whenever I click the rearview mirror back onto the button, it will stay there for a few days before it clicks and falls off. What would you suggest in this case?
That was Radical. Oh wait, that's your other channel. Thanks for the tip.
It's a good thing my van has two rear view mirrors on the doors . . . my dog gets paranoid that I'm keeping an eye on what she's up to back there when we're headed down the road :) (She's probably the one that knocked my mirror off, in the first place!) Thanks for the tips, Dave! See you down the road . . . God Bless
thanks Dave
G'day Dave, thanks for the video, Permatex, great product, interesting discounted price in Australia $14 / 70.
thanks for help was good tutorial and easy to follow along with now my mirror is back where it is supposed to be :)
Thank you! I have to do this after work today!
Excellent video man! Thanks for sharing! 👍👍👍
Great information and instructions! I had that happen before and was expensive to get it reattached.
$2.99 next time
@@cheapwheels9828 exactly 💗
Hey, Dave! Thanks so much for this video! I'm on the verge of cleaning the windshield with the razor blade. I really like the way you explained every step! By the way, is your button still hanging from this application? Thanks, Dave, so much!
Enjoyed the video. Thanks.
Glad you enjoyed it
Good stuff Dave,,, be well out there!
thanks
One litte tip when you use the razor blade to clean the glue off the button. Put it in the mirror. Will be easier to hold, as well as safer.
Great Video Dave!
Thanks!
Have a safe blessed day! 🙏🏽🙏🏽🙏🏽🙏🏽🙏🏽🙏🏽
You too!!
Bought it for 13.00 at advance auto parts, it's been going strong for 2 weeks with 90 degree temps every day
Helpful vid, thanks for sharing man!!!
Love the new channel
Thanks
Dave great job and explain..thx
I've glued a few on higher up over the years as I'm tall.
Oh, right on
The sun always makes mine come off every summer
Mine just popped off last week in 90 degree heat. Had been on for appx 3 months. Sucks. Did you find any useful solution?
Thank you for this Dave‼️👌🏼😃
You bet
I'm predicting Cheap Wheels will have an upcoming episode titled; "How to replace the windshield on an old pickup truck". But maybe that's just me. Another good video Dave, no idea why it didn't pop up in my feed for an entire day though.
Not this truck. Its not bad enough yet
I have had luck with epoxy for an aftermarket mirror I had installed. Permatex failed twice, once while tightening screw and another in summer heat. Cleaned with windex, heard something about windex leaving a residue?? Last time with epoxy used a 70% IPA wipe, so idk what actually made this thing finally stick.
Good job Dave.
Thanks
Hey Dave ..... I notice in the beginning of the videos and the end I hear the sound of a vehicle running.... and you drive Fords...... neighbors car? I love your videos. God bless
LOL!
I'd love to see a diy windshield swap if that's possible. Plus I see you got a good crack already in yours. 👍
I wouldnt change mine. Its not that bad.
I got at least 1/2 dozen hats that look like that. Mine have big wide sweat bands on them though.
Thanks. I always look back, to reflect.
Just what I needed!
During this heat wave I doubt it will get below 75 degrees in Memphis today!
no kidding
The use for stihl tuning screwdrivers never ends 👍
Right!!
Thank you Dave.
Great vid man
Thanks
Mahalo! Worked great
..Time to get mine out of the glove box..lol..stay safe.
🤣
good luck
Good job Dave....thanks
Thanks for watching!
Thank you. Boy did I not do that right a couple years ago and why I have a jerry-rigged rear view. I'll give it another try. Love these videos. Very helpful.
Good luck this time!
92 F150 button removed Thanks Dave
Does this kit hold to heat? Mines rear view mirror fell off but it took some of the windshield glass too a small piece. What do you suggest to do? Use epoxy?
?
Thanks man i had the stuff but the package got wet and desintegrated
Hello Dave.
hello
You think this can be used to glue any material to glass, not just a METAL button? I'd like to use it to mount a DashCam instead of a suction cup mount.
Permatex costs £13.49 ($17) in the UK on amazon.
Help Dave...that shiny layer of adhesive is all bumpy and still on windshield...I've tried scraping and good off special epoxy remover....won't budge...It's all bumpy...helllllp
Good one!
Thanks!
Great video gracias
Mirrors? We don't need no stinkin' mirrors!
right
Does anyone know what the rule for the temperature is? The instructions say 50-75 degrees, but the low in Houston is 78 tonight. I need to get this back on, but I don’t want to mess it up. Any help is appreciated!
Memphis is up to 94 degrees today already at 8 am! Not sure about tonight in my garage!
When I have this problem again I wil use this. Thanks
Happy to help
Glued mine on twice with that kit and another and it fell off both times
For $2.99? Not at Walmart. I think I paid around $10.
Good Video!
Thanks!
good job
The good ol boys at napa told me to leave the mounting nub cure overnight if possible. I did, seems ok.
Which is the glue used,can you provide buying link indian
ty very good video.