Nice video. If i wanted to upgrade from an hks f-con vpro to say pro efi, can tuners typically take care of this? Would it be equally straightforward as if you were to start with an oem ecu?
Hi Sam you can upgrade from FCON V PRO to Link Kurofune.it is directly plug in to FCON Harness but if you start from oem ecu which says it can’t reflash.There are many direct plug in ecu.your local tuners can give information about ecu tuning.regards. ONE.
Hi Bernardo it’s need to be tune to make more power.Such as add more timing and lean out some fuel on top end and set up types of ignition system,how many injectors,calibrate TPS.because it’s not contain tune file in ECU.You can’t start the car without set up.Unless you bought preowned ecu with harness which matching your car and same set up.Regards ONE.
I seen in a old Japanese hks video . They used this for thier superchargerd s2000…. This ecu isn’t specifically made for any car is it ? Because I want it for my ap1!
Hi it’s a piggy back ecu which intercepted map sensor,injectors and ignition signal.so cannot adjust rev limit.Yes it can use on your AP1 with HKS HP5-3 harness.regards ONE
![F.HERO Ft. JSPKK x ลำไย ไหทองคำ x M-PEE - ไม่สนิทบิดหมด (Thai Riders Anthem) [Official MV]](http://i.ytimg.com/vi/kPJZ0UihBfk/mqdefault.jpg)
If the engine not in list of wiring harness, can we diy the wiring harness ?
Yes you can wire in as piggy back
just only select triggers to suit your engine on power writer software and dip switch in front of FCON ecu
Nice video. If i wanted to upgrade from an hks f-con vpro to say pro efi, can tuners typically take care of this? Would it be equally straightforward as if you were to start with an oem ecu?
Hi Sam you can upgrade from FCON V PRO to Link Kurofune.it is directly plug in to FCON Harness but if you start from oem ecu which says it can’t reflash.There are many direct plug in ecu.your local tuners can give information about ecu tuning.regards. ONE.
@@onediycartuning Great. this is helpful. thanks.
it is necessary to modify some parameter in the fcon or just connect it vastly to increase the performance of my vehicle thanks for answering
Hi Bernardo it’s need to be tune to make more power.Such as add more timing and lean out some fuel on top end and set up types of ignition system,how many injectors,calibrate TPS.because it’s not contain tune file in ECU.You can’t start the car without set up.Unless you bought preowned ecu with harness which matching your car and same set up.Regards ONE.
@@onediycartuning So if I buy one for a specific car model, it is not necessary to modify the parameters
I seen in a old Japanese hks video . They used this for thier superchargerd s2000…. This ecu isn’t specifically made for any car is it ? Because I want it for my ap1!
Hi it’s a piggy back ecu which intercepted map sensor,injectors and ignition signal.so cannot adjust rev limit.Yes it can use on your AP1 with HKS HP5-3 harness.regards ONE
How about hr15de engine, which harness can be used? Or can diy harness wiring ?
นี่ถ้าไม่เข้าไปดูในช่องไม่รู้นะเนี่ยว่าเป็นคนไทย
ขอบคุณที่มาดูนะครับ รบกวนกดติดตามด้วยนะครับ
Hello friend how to download fcon-is software?
I buy fcon is 2nd from other someone, i dont have sofware to edit
How to get the software
Hi sorry you can’t download software
Its for HKS dealer only
How to i register it for the dealer
Aiyo..hks no good, i can't do it fo myself..i can't enjoy it tunning.
Goodddd
Hks fcon is no good, no friendly for car owner.. can't give software editor
Haha