C7 Audi A6 3.0T S-Line Ecstuning Rear Lower Diffuser Install + A Sneak Peek.

แชร์
ฝัง
  • เผยแพร่เมื่อ 8 ก.พ. 2025
  • In thjs video I install an ecstuning rear llwer diffuser on my C7 Audi A6 3.0T and give a sneak peek of something coming up soon for my A6.

ความคิดเห็น • 63

  • @mydimeisup5103
    @mydimeisup5103 2 หลายเดือนก่อน +1

    Tip for anyone removing diffuser. I just had to do this today since I'm installing S7 Sport mufflers, so I needed a diffuser that had a quad exhaust setup. I was able to unclip the side of the diffuser, but when it came to every clip after the thing would not budge. I was pulling so hard I was afraid I was gonna rip the tabs off the bumper that go into the diffuser. My trick was to pull enough to see the tab from the bumper that goes into the diffuser (tabs point down from bumper into diffuser). Take a panel wedge or small screwdriver, and stick it between the bumper and the diffuser and twist to release the tab up from the diffuser. Each tab you release will have the diffuser come out more and more so you can move to the next clip.

  • @panchitoyolo
    @panchitoyolo ปีที่แล้ว +4

    Made this look easier than it looks.
    When I wrapped by A6 I couldn’t that diffuser out at all.

    • @cmidas3396
      @cmidas3396  ปีที่แล้ว

      Yeah you gotta be careful pulling the tabs out.

  • @1970genes
    @1970genes ปีที่แล้ว +1

    Just stumbled on your vids and thoroughly the series. Just got myself an A8L and gives me some ideas.

    • @cmidas3396
      @cmidas3396  ปีที่แล้ว

      Yeah they are fun cars. Check our U Wrech It Auto channel also. He's doing an A8 build.

  • @Bo12346hhgfgdg
    @Bo12346hhgfgdg 7 วันที่ผ่านมา

    very nice i like the defuser. If you want to know what to do next get window tint! You gotta address that.

  • @robertdaone
    @robertdaone ปีที่แล้ว +3

    Slightly bigger tips would complete the package but still looks good though!

    • @cmidas3396
      @cmidas3396  ปีที่แล้ว

      Yeah I'm look around for tips.

  • @st1ll_human
    @st1ll_human ปีที่แล้ว +2

    Clean A6 man

  • @nathantroutman4728
    @nathantroutman4728 ปีที่แล้ว +3

    It looks really good

  • @JohnnyBlaze-qz6ek
    @JohnnyBlaze-qz6ek ปีที่แล้ว +2

    Looks good! Man, you have done a lot to car...

  • @WickedSickness-tc7rv
    @WickedSickness-tc7rv ปีที่แล้ว

    I just got a 2012 A6 about 2 months ago and have been searching and searching for a content creator that focused on things like this. I'm so happy I found your channel and I look forward to watching more of your videos. This diffuser looks sick. Where did you get it?

    • @cmidas3396
      @cmidas3396  ปีที่แล้ว

      Thanks. I got the diffuser from Ecstuning.

  • @Dealsonwheels215
    @Dealsonwheels215 ปีที่แล้ว +4

    Bro my rear sunshade stuck up on my a6 c7.. any recommendations

    • @cmidas3396
      @cmidas3396  ปีที่แล้ว

      Sorry my A6 doesn't have any sunshades. I wish it did. My C5 has them.

  • @sebastianlorenzo4935
    @sebastianlorenzo4935 ปีที่แล้ว +1

    Lookin good 👍🏽

  • @eurogang831
    @eurogang831 10 หลายเดือนก่อน +2

    Is it carbon I’m looking to get one also how do you like your car sick grill

    • @cmidas3396
      @cmidas3396  10 หลายเดือนก่อน +1

      No this one is gloss black but I think they ha e something in carbon fiber.

  • @agasociados
    @agasociados 7 หลายเดือนก่อน

    it fits pretty nice

    • @cmidas3396
      @cmidas3396  7 หลายเดือนก่อน

      Thanks

  • @MrTelepuzikas
    @MrTelepuzikas ปีที่แล้ว +2

    Nice

  • @FUNNYVlDS
    @FUNNYVlDS 8 หลายเดือนก่อน +1

    Hey what year is your Audi I think I’m gonna just buy this one for my 011 the rear diffuser look identical and my model is an s line prestige

    • @cmidas3396
      @cmidas3396  8 หลายเดือนก่อน

      Mine is a 2012. They are most likely different though.

    • @FUNNYVlDS
      @FUNNYVlDS 8 หลายเดือนก่อน

      @@cmidas3396 do yk if ecs has returning policy

    • @cmidas3396
      @cmidas3396  8 หลายเดือนก่อน

      @@FUNNYVlDS Not sure

  • @johnnyvasquez8724
    @johnnyvasquez8724 ปีที่แล้ว +2

    Is the wing from Ecs too?

    • @cmidas3396
      @cmidas3396  ปีที่แล้ว

      No I had it made in forged carbon fiber from a company that sales them in carbon fiber on ebay. Can't remember the company but I did a video on it and the information is in there if you look through my channel on that video.

  • @nuidavis8997
    @nuidavis8997 9 หลายเดือนก่อน +1

    Have you looked into lowering links ?

    • @cmidas3396
      @cmidas3396  9 หลายเดือนก่อน

      You mean for air suspension? My doesn't have air suspension so I'd have to do coilovers or lowering springs.

  • @eurogang831
    @eurogang831 11 หลายเดือนก่อน +3

    Where you get it?

    • @cmidas3396
      @cmidas3396  11 หลายเดือนก่อน +1

      Ecstuning.com

  • @kamiziom3835
    @kamiziom3835 ปีที่แล้ว +2

    i need this but no send to germany😢

    • @cmidas3396
      @cmidas3396  ปีที่แล้ว

      You might be able to connect with a shipper like fedex or ups and see if you can have it sent somewhere so they can ship it to you.

  • @omaireen5
    @omaireen5 ปีที่แล้ว +1

    hi can you mention the shop that you buy it from please

    • @cmidas3396
      @cmidas3396  ปีที่แล้ว

      I bought it fron Ecstuning. I think it only fits s-line bumpers.

  • @coltonberry9579
    @coltonberry9579 8 หลายเดือนก่อน +1

    i genuinely do not know why it wouldn’t fit my a6, it’s not an s-line it’s a premium plus, but literally everything was identical, i have a new one and im pretty sure it’s for an s6😂it’s too wide

    • @cmidas3396
      @cmidas3396  8 หลายเดือนก่อน +1

      Yeah this one is for the s-line bumper. I think the S6 is the same as the s-line bumper

    • @coltonberry9579
      @coltonberry9579 8 หลายเดือนก่อน

      @@cmidas3396 that’s what i figured, the ends just bow outwards a bit more and it’s a tiny bit wider. shit pisses me off so much now i’m stuck with a $700 carbon diffuser that won’t fit my car😂

    • @cmidas3396
      @cmidas3396  8 หลายเดือนก่อน

      @coltonberry9579 Can't you return it?

    • @coltonberry9579
      @coltonberry9579 8 หลายเดือนก่อน

      @@cmidas3396 i returned the ecs one and got the other new one from alibaba, so no😭😭😭

  • @boogeymana6
    @boogeymana6 ปีที่แล้ว +3

    Ah coo we got a face reveal

    • @cmidas3396
      @cmidas3396  ปีที่แล้ว

      Yeah if you look in my channel you can see my face clearly in other videos.

  • @MrPaulius1995
    @MrPaulius1995 11 หลายเดือนก่อน +1

    Hi. This back bumper is sline or standart?

    • @cmidas3396
      @cmidas3396  11 หลายเดือนก่อน +2

      It's an S-line bumper

    • @MrPaulius1995
      @MrPaulius1995 11 หลายเดือนก่อน +1

      Is this diffuser suitable for universal, avant? Or is it only for the sedan? Or any difference?

    • @cmidas3396
      @cmidas3396  11 หลายเดือนก่อน +1

      @@MrPaulius1995 It's for the S-line sefan bumpers. Not sure if it fits the Avant models.

  • @FUNNYVlDS
    @FUNNYVlDS ปีที่แล้ว

    Bro I wish I could find a diffuser for c6 generation I have a 2011 Audi a6 I can’t find much not even an intake

    • @cmidas3396
      @cmidas3396  ปีที่แล้ว

      Looks like CTS Turbo has an intake part # CTS-IT-300R and also Uspmotorsports part # USP-A67-INTK. Check with them and confirm though.

    • @FUNNYVlDS
      @FUNNYVlDS ปีที่แล้ว

      @@cmidas3396I purchased a intake from uspmotorsports but they messed up my order and told me to re purchase it. I’m still waiting for my refund the same thing happened with a website called Roc euro, they both have a reputation so Ik they’re real companies just a pain, i appreciate the reply

    • @FUNNYVlDS
      @FUNNYVlDS 8 หลายเดือนก่อน +1

      @@cmidas3396do you think it’s possible to install this rear diffuser on a c6 do you know by any chance how much of a difference the rear bumper is on a 2012 and a 2011

    • @cmidas3396
      @cmidas3396  8 หลายเดือนก่อน

      @@FUNNYVlDS I don't know how much different they are but you can find add on diffusers on ebay. Also you can google "C6 Audi A6 body kit" and see if any other companies have anything.

    • @FUNNYVlDS
      @FUNNYVlDS 8 หลายเดือนก่อน +1

      @@cmidas3396 I’ve done alot of research there’s only something called a maxon design body kit , it’s a front lip, side lips and a thin spoiler, there’s nothing similar to the parts for the c7, they have such agressive looking spoilers and rear diffusers, do you know how i can figure out if it a 2012 part like this fits most websites say they don’t but I’m wondering if it’ll take js a little trimming to fit

  • @xxblazyxx526
    @xxblazyxx526 6 หลายเดือนก่อน +1

    I am buying one for my audi right now i have 2018 C7 A6 audi and this will make it sexy more then my GF i hope sge does not read this comment or i will be single 😂.

    • @cmidas3396
      @cmidas3396  6 หลายเดือนก่อน

      Hopefully she doesn't see this lol 😄
      I think the 2018 is actually C7.5 so make sure it fits your year.