I purchased a set for my front seats only (2014 4Runner) and am very impressed with fit and finish. No regrets. I based getting these covers solely on Desert Ranch's video. Good advertising for Coverado!
They just totally gave up when it came to the back seats. The rear headrest covers are tacky. The I'll fitment for the seat belts and rear center arm rest makes the back seat look like an afterthought. If even that. I was really sold on the front seats. But the back seats would make me stay far away from purchasing these. The $20.00, MotorTrend seat covers I bought at Ross Dress for Less look way better all around. Even the back seat looks so much better and the headrests look 100 times nicer. Great video and thank you for helping me make my decision. 👍
Good catch!...you are absolutely right!...they should have put that in the instructions ...or maybe he missed that. Definitely gonna have to re-do them for safety sake.
@@desertwrenchThe tags near the top on the side says 'airbag'. Plus, buy a headlight flashlight from harbor freight to see under the seats. About $3.00.
Just returned a set of these with pillowed headset for my 2024 CX5. Looked great until i got to the backseat. Unfortunately they don't make them to fit as I reached out to them before returning. Issue I had was on my CX5 the female ends of the seatbelts come through the bottom cushion and Coverado cuts for the ones that come between the back and bottom cushion. Not a big deal if you never plan to use the rear seat belts and don't mind exposed seat. I'd buy them again if they ever come out with a better fit. For now I'm still looking
I got me some affordable front seat covers at Ross actually but it's the kind where the seat and backrest are one piece so there's no worry for small items to fall in the slits also the headrest fit perfectly. I tried doing the backseat ones but didn't like the fact that I needed to pull apart the backseats and the fear of doing damage also not being able to drop down the back cup holder was an issue too.
I just ordered a set from Coverado for a similar sized car and I'm glad you posted this video so I can see how well the back seat-back coverage will be. This helps me plan my installation. Great video!
I bought some for my car, they fit fantastically and look great. I only bought the front because they were expensive enough. I wish they sold the rear separately.
Wow. Very beautiful covers. Love how they made the headrest. Thank you for taking the time to demonstrate how to install them. This has always been a struggle for me.
There are better ones on amazon. The tops of the front seats have just 2 holes, cut exactly for the headrest posts. The holes fit snug around the cap above the hole. Others have the head rest cover velcroed closed for a custom look.
When I did it I pushed the cushion towards the back so I could stick a long flat head screwdriver where the metal brackets go into the plastic clips and pried that while pulling up. It took some trial and error but eventually got it
@@desertwrench Thanks!!... I broke the clips and now my back seat is a rocking chair...got pulled over and was given a 500$ fine for operating an unsafe vehicle....special thanks to the design team at Coverado...NOTTT
I have power front seats. I can’t figure out what to hook the bottom seat of the front part to since it’s a lot of electrical cords underneath. Obviously I don’t want to connect to those with movement when sitting in the seat cushion or moving the seat with the power. Any guidance would be helpful. I have a 2021 Acura TLX if that helps at all. I can’t seem to find any installation videos of these similar seat covers on my car or similar or if I do they don’t show what I need to see or they don’t describe it.
I have power seats in the Cruze as well, you should have some type of bar going across the bottom where the seat cushion mounts to that you can connect the hooks.
Good luck! It's been 4 months or so and I still enjoy them! Just make sure you keep track of what side has the airbag tag, someone in the comments pointed it out and I made sure to swap the 2 front seats
Yes they are universal, I put your vehicle in on the Amazon link and it says it fits, you could also reach out to them to double/triple check if you want they have been very responsive with me.
This doesn't show what happens to seat controller knobs. I haven't seen yet a car which doesn't have those knobs on the side of the bench or back rest...
I have the same seats in my Sentra but on the very back rear of the seat, there’s like a little carpet cover. I think you can move it, but I’m scared to touch it so I don’t worry about that.
so my car is a honda 2011 i ordered these i’m beige but on the driver side there’s a little arm rest how do i place the cover over that or around that :/
I would remove the arm rests and slide the seat cover over the top. Then you can make a hole for the bolt to go back through to reinstall the armrest. Or leave it off it's up to you.
The Install video is staged...the actor has oversized seat covers which is why the back cover slid right on. My vovers took nearly 49 miinutes each to install.
They are awful! The back seats and headrests are ridiculous as they look stupid with no cutouts for the seatbelt fixings and the head restraints that don’t cover them! I’ve just bought some German made leather look grey covers for my Mercedes A150 and I hope they fit a damn sight better than these do!
On amazon you should be able to put in your vehicle and it will let you know if it fits! Coverado has also been very responsive when I have questions so you can always reach out directly to them to double check
U moved to fast for me. They looked ok. Too much work. And it takes more than the time u mentioned. I rather pay someone to do what u are doing.. thx for sharing. But too much going on. I will pay a young man to do it when I get them.
Your first mistake was you should’ve put them on clean hairless seats. Your second mistake was continuing to the back seat because that’s where you lost me. That backseat looks ridiculous with the way they designed it, but the front seat doesn’t look so bad except for those headrest covers. Those front seat covers are a 7 and the backseat covers are a 2 but your girl is an 8.
Watch the seller's installation video and read the installation instructions before making...an installation video...especially when you don't know what you're doing. Your half-a$$ installation video is going to cost this company many customers. If you can't figure out how to properly put on the headrest cover, you have no business making a video of this type.
I purchased a set for my front seats only (2014 4Runner) and am very impressed with fit and finish. No regrets. I based getting these covers solely on Desert Ranch's video. Good advertising for Coverado!
After watching this video I decided to return these seat covers and couldn't be happier with my decision!
You can breathe easy 😊
what did you get instead?
why did you return them
Lol just seeing the headrest makes me seethe.
They just totally gave up when it came to the back seats. The rear headrest covers are tacky. The I'll fitment for the seat belts and rear center arm rest makes the back seat look like an afterthought. If even that. I was really sold on the front seats. But the back seats would make me stay far away from purchasing these.
The $20.00, MotorTrend seat covers I bought at Ross Dress for Less look way better all around. Even the back seat looks so much better and the headrests look 100 times nicer.
Great video and thank you for helping me make my decision. 👍
Just a heads up you put the front seats on the wrong sides, the perforation for the airbag needs to be on the same side as the door not in the center
\😮/
Good catch!...you are absolutely right!...they should have put that in the instructions ...or maybe he missed that. Definitely gonna have to re-do them for safety sake.
yep lolol
Have you figured out the front seat backs are switched yet? Airbag flaps are on the wrong side.
No I completely missed that thanks! I switched them over!
@@desertwrenchThe tags near the top on the side says 'airbag'. Plus, buy a headlight flashlight from harbor freight to see under the seats. About $3.00.
Just returned a set of these with pillowed headset for my 2024 CX5. Looked great until i got to the backseat. Unfortunately they don't make them to fit as I reached out to them before returning. Issue I had was on my CX5 the female ends of the seatbelts come through the bottom cushion and Coverado cuts for the ones that come between the back and bottom cushion. Not a big deal if you never plan to use the rear seat belts and don't mind exposed seat. I'd buy them again if they ever come out with a better fit. For now I'm still looking
I got me some affordable front seat covers at Ross actually but it's the kind where the seat and backrest are one piece so there's no worry for small items to fall in the slits also the headrest fit perfectly. I tried doing the backseat ones but didn't like the fact that I needed to pull apart the backseats and the fear of doing damage also not being able to drop down the back cup holder was an issue too.
I just ordered a set from Coverado for a similar sized car and I'm glad you posted this video so I can see how well the back seat-back coverage will be. This helps me plan my installation. Great video!
I bought some for my car, they fit fantastically and look great. I only bought the front because they were expensive enough. I wish they sold the rear separately.
Wow. Very beautiful covers. Love how they made the headrest. Thank you for taking the time to demonstrate how to install them. This has always been a struggle for me.
The seat cover looks really good, the headrest are ugly.
I agree, I wish the head rest covers were a tighter fit but the covers themselves are great.
There are better ones on amazon. The tops of the front seats have just 2 holes, cut exactly for the headrest posts. The holes fit snug around the cap above the hole. Others have the head rest cover velcroed closed for a custom look.
which ones exactly?
How are they holding up after a few months of use?
So far they are awesome, still look the same as when I put them in. No complaints
I like the front head Rest covers better than the back
so many bad reviews on amazon showing stitching coming undone after only weeks. just before i finally pulled the trigger
Got some from Giant panda on Amazon for my Wrangler. They were a pain putting on but looked great afterwards
OMG THEY ARE NICE !!!!! Do they have them for big suv
Rick is the one I will do with you when I get there
Would be better if you could get them with no logo
Not bad at all. Great video with instructions
cant believe they still use a stretchy shoelace to secure, an actual shoelace would be better, I suppose you can modify them a bit
I bought them and sending them back. They are NOT leather. Not cutout for the handle to lean the seat forward to let someone in the back seat.
What material are they?
@@XDMIIIIIIIII
A good quality leatherette
@@XDMIIIIIIIII plastic. leatherette is a made up word for plastic
does she come with the seats
The best one is from EKR
That's the one I have and love them.
I can’t push the chuck thing through the seat to the back. I think my car has a cover on the back that I can’t remove
I hope you fixed it by now but you put the seat covers on the wrong seats. The airbag label goes on the outside because that's where it deploys.
Yeah I fixed it after I realized it. But thanks for checking! 👍
Added these to my car to protect my seats, much better than expected. Shall post a video later today @V8DOES
I think they'd be doing themselves a favor if they just made the whole headrest to match.
Thanks for the help! Great video!
Bro I’ve got the same car but can’t figure out how to take out the back seat like you did. How’d you do it?
When I did it I pushed the cushion towards the back so I could stick a long flat head screwdriver where the metal brackets go into the plastic clips and pried that while pulling up. It took some trial and error but eventually got it
@@desertwrench Thanks!!... I broke the clips and now my back seat is a rocking chair...got pulled over and was given a 500$ fine for operating an unsafe vehicle....special thanks to the design team at Coverado...NOTTT
hate the head rests!
I have power front seats. I can’t figure out what to hook the bottom seat of the front part to since it’s a lot of electrical cords underneath. Obviously I don’t want to connect to those with movement when sitting in the seat cushion or moving the seat with the power. Any guidance would be helpful. I have a 2021 Acura TLX if that helps at all. I can’t seem to find any installation videos of these similar seat covers on my car or similar or if I do they don’t show what I need to see or they don’t describe it.
I have power seats in the Cruze as well, you should have some type of bar going across the bottom where the seat cushion mounts to that you can connect the hooks.
Do these faux leather covers get hot in the summer and burn your skin?
Better than shreds.
I have a Chevrolet cab and chassis 3500 crew cab 2024 the back seats don't fold forward but the bottom seats will pull up. Would these fit?
What is back seat head rest is attached permanently?
Nice n baggy like my jeans when I was 14 yrs old.. 😢
Good video, cheers
I've purchased similar and should arrive in a week or so, will be back to this video for pointers ;)
Good luck! It's been 4 months or so and I still enjoy them! Just make sure you keep track of what side has the airbag tag, someone in the comments pointed it out and I made sure to swap the 2 front seats
@@desertwrenchnice one. Thanks
Do they make this for all cars
When u was in back puting the back on you missed the center one 😂😂😂😂😂 uou only did both ends so center wont be tight lol😂😂😂
Are these universal? Any idea if it’ll fit a 2023 Kia sportage?
Yes they are universal, I put your vehicle in on the Amazon link and it says it fits, you could also reach out to them to double/triple check if you want they have been very responsive with me.
Smells? How is the off gassing?
I don't notice any, especially 4 months in
Are these universally fitting for most cars or one has to specify According to Make and model of the car,?
Universal for the most part, I believe Amazon has a compatibility checker or you can reach out to them and see if it fits
Are these heavily padded for comfort or more to cover??
I wouldn't say heavily padded but there is some padding on the bottom and lumbar. It's mostly for coverage.
How much do they cost for a 2020 Rav4 and how much do you charge to install it?
Oh $165..... So how much for the installation?
This doesn't show what happens to seat controller knobs. I haven't seen yet a car which doesn't have those knobs on the side of the bench or back rest...
The bank covers are a 2 out of 10 honestly 😂
I tried this with my Nissan Maxima Platinum but couldn’t not get to the back of the fronts zero gravity seats.
I have the same seats in my Sentra but on the very back rear of the seat, there’s like a little carpet cover. I think you can move it, but I’m scared to touch it so I don’t worry about that.
I can't see how the elastic hooks into the plastic hook.
Around 3 minutes into the video is a close up
Thank you
Got to stop smoking
so my car is a honda 2011 i ordered these i’m beige but on the driver side there’s a little arm rest how do i place the cover over that or around that :/
I would remove the arm rests and slide the seat cover over the top. Then you can make a hole for the bolt to go back through to reinstall the armrest. Or leave it off it's up to you.
Why are u so nervous😂
to bad they don't sell mustang specific seats
The Install video is staged...the actor has oversized seat covers which is why the back cover slid right on. My vovers took nearly 49 miinutes each to install.
You gotta start doing some cardio brother
I can smell the 5 packs of cigarettes a day from this video
Lmaooo
Lmfao
😂😂😂😂
I'm pretty sure it's just because his mic is so close to his mouth. With lav mics it's super common for breathing to sound amplified
Ordered the wrong one bro
They are awful! The back seats and headrests are ridiculous as they look stupid with no cutouts for the seatbelt fixings and the head restraints that don’t cover them! I’ve just bought some German made leather look grey covers for my Mercedes A150 and I hope they fit a damn sight better than these do!
Can u give an update on the German ones
link?
Brand?
Its a shame so much quality wrnt into the material but not nearly enough universal design thought.
Bro breathing universal 😂😂
Wouod they fit a truck ?
On amazon you should be able to put in your vehicle and it will let you know if it fits! Coverado has also been very responsive when I have questions so you can always reach out directly to them to double check
3:12 Mine always came out......no a good design.
Bro racing 😅
Hernandez Richard Martinez Paul Perez Nancy
U moved to fast for me. They looked ok. Too much work. And it takes more than the time u mentioned. I rather pay someone to do what u are doing.. thx for sharing. But too much going on. I will pay a young man to do it when I get them.
stop lying. it's not leather
Your first mistake was you should’ve put them on clean hairless seats. Your second mistake was continuing to the back seat because that’s where you lost me. That backseat looks ridiculous with the way they designed it, but the front seat doesn’t look so bad except for those headrest covers. Those front seat covers are a 7 and the backseat covers are a 2 but your girl is an 8.
Lee Jose Martin Mark Allen Jessica
To loose looking
I purchased these in 12/2023. IMO this brand is worse than crap. 2 set were ordered for different vehicles and they are ugly AND they smell horrible
Those back seat covers are useless.
Look pretty nice
Thanks! Been using them for a few days now and they are awesome, they fit really well and don't look like seat covers at all. I'm happy with them
They look ugly but it looks like they’ll last for a long time.
Brutti quelli dietro, e pessimi tutte le coperture dei poggiatesta, risultato troppo posticcio
Lame.....
You are a cutie! 🥰
Watch the seller's installation video and read the installation instructions before making...an installation video...especially when you don't know what you're doing. Your half-a$$ installation video is going to cost this company many customers. If you can't figure out how to properly put on the headrest cover, you have no business making a video of this type.