I changed both tires myself the last time I put two new tires on the front of my riding mower. It took me several hours to get both old tires off the rim,then used a big flat head screwdriver along with a spoon wrench to seal them back on the new rim. I will tell you this,next time I change the tires on that rider I will just pop the old ones off and take them to my mechanic who said he would mount the new tires for 20 dollars. Saves me about two hours of work and is well worth it!
I'm an ex-Class A mechanic and I've learned a few tricks.... not a good idea to heat the dust caps, they are only thin material and could warp. Instead either spray the sealing point with WD40 and let soak, or cover the cap with a rag, then sharply but gently tap around the edge of the cap with a small hammer or the edge of pliers to 'shock' the dirt loose, then take a medium to large channel lock pliers with a rag in the jaws, grab the cap firmly in the jaws (but don't squeeze) and twist it back and forth to loosen it, then pull towards yourself after it turns freely. For the clip, some are e-clips that can be eased off with a small flat screwdriver and some may need snap-ring pliers. To break the tire beads, don't pound your hands black and blue, just step on the edges of the tire, your weight will do the trick. Mechanics learn to save wear and tear on their bodies as well as how to work quickly.
Used your tip to replace the dust cap, but in reverse - sprayed some lube on the inside of the cap, let it soak with a gentle rotation for about 30s and then with applied pressure, a pick, and a little persistence, the sucker slipped right on! Thanks!
For an ex class a mechanic you are definitely not the brightest turd on the pile 🤣😂🤣👍🤟👌. You do not have to take the rim off the lawn mower to change the tire. I'm an ex class a do it yourselfer and I changed and tubed many tires without removing the rim. Even rear tractor tires.
Thanks! I like the positive energy and the silliness. And I’m gonna try to fix my tire now with the knowledge that I gained from your video. Keep up the good work!
Changed so many over the years but your title caught my attention & then I had to watch. My little guys use to love riding with me as well. Stay safe, Joe Z
Thanks! I watched your video and it was easy peazy. I made a few adjustments but nothing major to speak of. You did a great job for a Do-it-yourselfer with improvised tools! 👍
Most online videos that make this job look easy, like this video, are dealing with 2 ply tires. 4 ply tires are a completely different beast... you'll need real tire irons and a lot more umph to get 4 ply tires off and on.
Few suggestions 1.) Dust covers - Use pentraing oil and a rag with some large channel locks to GENTLY twist the cap back and forth to lossen it off, just don't squeeze hard or you will crush/bend it requiring its replacement. 2.) Snap rings - Rather than flat head screwdrivers, try pointy needle nose pliers tips or small punches or jewelry screwdrivers. 3.) Prying - When prying off tire beads, just step on them with a heavy boot to dislodge the bead and use a cresent wrench handle to pry off, as it's smooth. Screwdrivers can damage the bead intergrity causing leaks on your new tire and are wider as well, a pair works great and you can use a rubber mallet to help driver them around the rim if necessary
Had same issue this past week. Quickest way with least hassle was taking it to a tire store down the street along wit new tire. Presto changeo, done in .5 hr. And there are tire spoons for the DIYer vs screw drivers, if you are so declined!
Moved from Los Angeles to TN where I now have 1.5 acres and old owners included a Husqvarna yth2246 mower. The backyard is quite sloped and the 2 times ive mowed since being here in some spots with alot of tree cover the ground stays damp well after a rain and my turf saver tires have gotten me stuck in a rut a few times. I imagine I look funny rocking my big butt side to side and bouncing on the seat so i got some more aggressive tractor tread kinda tires that came in today to install on my bad boy.. Been looking at some how to videos on how to do it without a machine, Ive done vehicle tires years ago in auto shop with a machine and ive done my son's bicycle tire but not a ridiing mower tire. I know its the same concept but wanted to see if its worth doing or if a tire shop can throw em on for a $20. Long story short, I tend to ramble on when I have a few adult beverages in me while roaming youtube videos.. i gave you a like for that smooth intro 👍
I appreciate you taking the time to comment on my video, thank you so much! If a tire shop is willing to do that, and if its more convenient for you I would definitely go that route. If not, its possible using a scissor jack and something heavy. A buddy of mine sent me a picture where a guy positioned a tire he was trying to fit on a rim under a hitch of a trailer/camper. He sat the scissor jack on the tire and cranked it up and as it lifted against the hitch the jack pushed against the tire and sat it passed the rim. I would recommend being careful, but there's definitely a possibility that may be able to help you do it super easy. Take care bud!
I just changed an old, cracked tire on my dad's riding lawn mower. I used Dawn dish soap and water to seal the bead. And added air to seal the bead. Less hard work for my Portable Ryobi tire inflator to add air with the Valve stem core in. Now i'm going to see if it will still hold air. One thing i like about the front tires on the riding lawn mower is easy to reseal the bead.
Thanks. A few of your tips helped me through this on my rear tires. I just threw some tubes in my tires. The tires were dry rotted, but no amount of slime could seal them, but they had a lot of tread still. I did the same process except I left the inside bead on. When the tubes give up the ghost, I will throw some new tires on. Thank you.
So, Zack, I just want you to read my mind and make how-to videos for anything I ever need to do. This was so good. KISS and not so over-technical. Thanks!
I took mine off then took it and the new tire to the local tire shop and it will magically appear on the rim on thursday. I accidentally bought 6pl instead of 2pl so i wont go near it myself. But your guide helped me see how to remove the tires so.. Ty sir!
Thanks for putting this together! Definitely made the job easier. One thing I found worked really well with the dust cap, was using a hair dryer to heat it up, both during removal and reinstallation. It goes right on and off with a gloved hand. Thanks!
This video sure helped some folks get their tire off, however I have a John Deere 430 lawn tractor that I run AG tires on which are farm use tires so it makes it extremely difficult to get them tires off because of how durable they are.
It is MUCH easier to mount the new tire with some dish soap on the bead of the tire and on the :shoulder" of the rim. Soap on the bead helps it slid onto the rim much easier and on the shoulder of the rim to help the bead slide into place.
I just use a cutting wheel on the grinder and cut the old tires off😂 dawn dish washing soap is a good lubricant for the tire going back on done and done ✅
Thanks much for the video & tips. Much appreciated. Did people already comment on your passenger? Operator's Manual tells you to never have a passenger on any riding mower. That 1 time in a million when Murphy's law strikes the passenger can fall and be injured or killed either from falling and/or be injured or killed being run over by the tractor. Even just a disfigurement or crippling or dismembering injury would be life changing for the whole family. Every year one or more farmers operating a tractor are stricken with this either riding as a passenger or just by being the equipment operator. Always better safe than sorry.
I have found for that retaining clip a larger size set of needle nose pliers fits into the voids of the clip and outward pressure did the job for me. I imagine a large set of slip joint (channel lock) pliers would do the job reinstalling em, at least I hope. I sweat like a pig (i may have hyperhydrosis) so seeing your shirt drenched I dont feel so alone now.. getting tools ready for the job i am doin i am already getting hot and moist. When I used to play basketball at the gym people didnt want to guard me because my shirts were literally soaked like i dunked em in water..
A little dishwashing soap about 50% with water, just a small brush really helps with demounting and remounting tire. On the dust cap I used a small butane torch to heat the cap a little, just don't get the flame to close. A cig lighter would work also.
Someone else had a good idea that works well for breaking the seal on the rims. Set your ladder foot onto the edge of the tire near the rim and stand on the ladder with some force on that side.
watching this because I have to change out a tire for the first time in my new lawn tractor….laughing at your Crocs…which I am also wearing currently 😂😂
The video is very helpful. My only question is how do I "throw" air into the tire? I was planning on using my portable compressor. ha ha ha! Seriously, thanks, again! Much appreciated.
Just wanted to say thanks! Everyone else out here like "Easiest way to remove a tire!" *Uses $200 tool*. You do it with a few screwdrivers and some sweat. This is the way.
Nice vid! I came here to see how to put the dust cap back on.. haha. You can just bounce the tire about once when putting air into it instead of using a strap. That will work on car tires also as long as you have a air nozzle that will lock on.
Some useful tips.. - Use soapy dishwashing water for removing and installing the tire to the rim. WD-40 at the very least. - Screwdrivers are too sharp and will cut up the rubber. Harbor Freight sells smooth edge tire spoons for working the bead to the rim.. again soapy water. You can also search common sites for tire spoons for motorcycles $10-$20. - Clean off the old grease on the axle and add some fresh axle grease. 👍
I place my tire and rim under the hitch on my truck. I set a small bottle jack on the bead and pump it up. The base of the bottle jack breaks the bead.
Good job. Thats almost exactly how I've done it in the past except I use a claw hammer to pop the dust cap off and tap it back on. Otherwise the local shop charges $25.00 to do it . I save the money and do it myself.
One way to avoid the rubber on the dust cap from shrinking too much as it cools is to do the entire job in the kitchen, if you can get the mower through the door of course.
I also just did this today lol. One tip: my tires were hard as hell to get off. I ended up laying them on their side, grabbing a 2x6, place it on the tire (with the other end on the ground like a ramp), and jumped on the 2x6 which popped it off :)
Great video and tips. I have a Craftsman Yt4500 that I replaced the rear tire on (similar to how you did it). Only trouble is that when I lowered the tractor again, now it won’t engage in drive! Go figure. I think I forgot to set the emergency brake. The transmission engage lever at the rear when pulled or pushed won’t engage the drive gears now. Now another problem to fix… and the grass is getting longer…. 😮
Me and my dad been trying to get our old lawn mower rim and tire and we did all the stuff to get the rim off and it just won't get off do you know what could be holding it on by chance?
If u took off the clip & washer, & it doesn’t have a bolt in the middle, u just have too pry it or pull it hard to start it. That happened to me also. Once I got it to move a little, it came off 👍
Checked the comments so I could check out any more tips I can get too as I’m a small female. Can’t believe some of the rude comments. I for one appreciate the help. I will also try adding a few things from the more productive comments. Thanks 😊
This didn't work for my 4 ply tires. I got about 2 hours in with only one new tire half on before I called it quits. Took it to a local tire shop and they did it for $40. Well worth the money
When you inflate the tire to seat the bead, removing the core allows more air to go in faster. Once the tire is seated, remove the strap, install the core, and air it up.
@@robertheinkel6225 I must be dumber than I thought. I thought the little stem in the middle of the valve had to press against the middle of the air chuck to allow the air to flow from the air hose… if you pull that stem out, how what allows the air to flow from the hose?
If you lightly clamp a vice grip to the very edge of the rim you don't have to concern yourself with the bead chasing you around as you go putting the tire on....
Tractor supply and northern tools had my size in stock today they were both about the same price Amazon had them much cheaper the size is molded into the side of the tire there should be three different numbers like 16X6.50-8 at least that’s how mine was identified
Ok I am 75 in November. Got the wheel off...valve out.... trying to break the seal on the old tire... cant do it. dropped my 200lbs on it with a plank...nope. I need a hint on how to use a jack or something to break the seal on the old tire
Lay it on its side. Grab a short piece of 2x4, maybe 2 to 3 ft long. Lay one end on the tire, just shy of the rim. The other end should be laying on the ground. Slowly and carefully Drive your car up onto the 2x4. This will break the bead every time.
To break bead on mine I had to use a ring of something stiff just bigger than rim ( I used steel since I work in a machine shop) like a old metal coffee can. Used my hydraulic press. Put tire up ring of steel -4x4 - sprayed soapy water and slowly pushed it off.
I changed both tires myself the last time I put two new tires on the front of my riding mower. It took me several hours to get both old tires off the rim,then used a big flat head screwdriver along with a spoon wrench to seal them back on the new rim. I will tell you this,next time I change the tires on that rider I will just pop the old ones off and take them to my mechanic who said he would mount the new tires for 20 dollars. Saves me about two hours of work and is well worth it!
The ratchet strap on the tire tire to seat the bead was a great idea! Thanks for the video bud.
I'm an ex-Class A mechanic and I've learned a few tricks.... not a good idea to heat the dust caps, they are only thin material and could warp. Instead either spray the sealing point with WD40 and let soak, or cover the cap with a rag, then sharply but gently tap around the edge of the cap with a small hammer or the edge of pliers to 'shock' the dirt loose, then take a medium to large channel lock pliers with a rag in the jaws, grab the cap firmly in the jaws (but don't squeeze) and twist it back and forth to loosen it, then pull towards yourself after it turns freely. For the clip, some are e-clips that can be eased off with a small flat screwdriver and some may need snap-ring pliers. To break the tire beads, don't pound your hands black and blue, just step on the edges of the tire, your weight will do the trick. Mechanics learn to save wear and tear on their bodies as well as how to work quickly.
Wanda, I would add one thing. For the cheap cost it's worth purchasing tire removal spoons which will remove the risk of damaging the tube.
Make a video for us ADHD ppl
Used your tip to replace the dust cap, but in reverse - sprayed some lube on the inside of the cap, let it soak with a gentle rotation for about 30s and then with applied pressure, a pick, and a little persistence, the sucker slipped right on! Thanks!
For an ex class a mechanic you are definitely not the brightest turd on the pile 🤣😂🤣👍🤟👌. You do not have to take the rim off the lawn mower to change the tire. I'm an ex class a do it yourselfer and I changed and tubed many tires without removing the rim. Even rear tractor tires.
@@kenholt8297 These are tubeless tires.
Thank you. Well done for taking your boy out and teaching him some real life experiences.
Thanks! I like the positive energy and the silliness. And I’m gonna try to fix my tire now with the knowledge that I gained from your video. Keep up the good work!
Man… good stuff here. Love the calm demeanor. Saved me a lot of frustration.
Changed so many over the years but your title caught my attention & then I had to watch. My little guys use to love riding with me as well.
Stay safe, Joe Z
Hey many thanks 🙏🏼. You saved me ton of cash doing this myself. Thank you bro!
Thanks! I watched your video and it was easy peazy. I made a few adjustments but nothing major to speak of. You did a great job for a Do-it-yourselfer with improvised tools! 👍
Thanks, you inspired me to just try harder to get the tire on the rim. The strap trick is A+
Very cleaver (and safe!) trick for seating the tire. Thanks for the tutorial bud!
Thank you for this video. I'm from Sweden. I have never done this. But I saw your video, and it worked for me. Thank you!❤😊
Worked a treat with the strap. Thanks!
Thanks for the education. I'll get to work now and do it. Thanks again!
Most online videos that make this job look easy, like this video, are dealing with 2 ply tires. 4 ply tires are a completely different beast... you'll need real tire irons and a lot more umph to get 4 ply tires off and on.
thanks. I tried following this video and there is zero chance I can get these things off like this dude did and I was getting so mad. Yep- 4 ply
Few suggestions
1.) Dust covers - Use pentraing oil and a rag with some large channel locks to GENTLY twist the cap back and forth to lossen it off, just don't squeeze hard or you will crush/bend it requiring its replacement.
2.) Snap rings - Rather than flat head screwdrivers, try pointy needle nose pliers tips or small punches or jewelry screwdrivers.
3.) Prying - When prying off tire beads, just step on them with a heavy boot to dislodge the bead and use a cresent wrench handle to pry off, as it's smooth. Screwdrivers can damage the bead intergrity causing leaks on your new tire and are wider as well, a pair works great and you can use a rubber mallet to help driver them around the rim if necessary
I haven't even started watching the video and I'm already giving you a Thumbs up just for sliding in and rolling out LMFAO now that was funny af 😂😂👍👍
Thanks for being so positive and funny in this video :)
Had same issue this past week. Quickest way with least hassle was taking it to a tire store down the street along wit new tire. Presto changeo, done in .5 hr. And there are tire spoons for the DIYer vs screw drivers, if you are so declined!
Moved from Los Angeles to TN where I now have 1.5 acres and old owners included a Husqvarna yth2246 mower. The backyard is quite sloped and the 2 times ive mowed since being here in some spots with alot of tree cover the ground stays damp well after a rain and my turf saver tires have gotten me stuck in a rut a few times.
I imagine I look funny rocking my big butt side to side and bouncing on the seat so i got some more aggressive tractor tread kinda tires that came in today to install on my bad boy.. Been looking at some how to videos on how to do it without a machine, Ive done vehicle tires years ago in auto shop with a machine and ive done my son's bicycle tire but not a ridiing mower tire. I know its the same concept but wanted to see if its worth doing or if a tire shop can throw em on for a $20.
Long story short, I tend to ramble on when I have a few adult beverages in me while roaming youtube videos.. i gave you a like for that smooth intro 👍
I appreciate you taking the time to comment on my video, thank you so much!
If a tire shop is willing to do that, and if its more convenient for you I would definitely go that route. If not, its possible using a scissor jack and something heavy.
A buddy of mine sent me a picture where a guy positioned a tire he was trying to fit on a rim under a hitch of a trailer/camper. He sat the scissor jack on the tire and cranked it up and as it lifted against the hitch the jack pushed against the tire and sat it passed the rim.
I would recommend being careful, but there's definitely a possibility that may be able to help you do it super easy.
Take care bud!
I just changed an old, cracked tire on my dad's riding lawn mower. I used Dawn dish soap and water to seal the bead. And added air to seal the bead. Less hard work for my Portable Ryobi tire inflator to add air with the Valve stem core in. Now i'm going to see if it will still hold air.
One thing i like about the front tires on the riding lawn mower is easy to reseal the bead.
My hero!!! I had.no idea how to change them
Thanks. A few of your tips helped me through this on my rear tires. I just threw some tubes in my tires. The tires were dry rotted, but no amount of slime could seal them, but they had a lot of tread still. I did the same process except I left the inside bead on. When the tubes give up the ghost, I will throw some new tires on. Thank you.
Yack on the slime usage. Tube or new. IMO of course.
Yeah it's frustrating how fast they dry rot and start leaking.
Lmao awesome you're narration brings out the confidence in us all.
Should we grease that axle end prior to putting the wheel and tire back on with a handful of grease???
So, Zack, I just want you to read my mind and make how-to videos for anything I ever need to do. This was so good. KISS and not so over-technical. Thanks!
Thanks, Zack! You helped me out immensely!
Thanks for posting. I learned some tricks.
I took mine off then took it and the new tire to the local tire shop and it will magically appear on the rim on thursday. I accidentally bought 6pl instead of 2pl so i wont go near it myself. But your guide helped me see how to remove the tires so.. Ty sir!
I've found that a scissors jack or bumper jack, with a car to press against, seems to work pretty well for breaking the tire from the rim.
Thanks for putting this together! Definitely made the job easier. One thing I found worked really well with the dust cap, was using a hair dryer to heat it up, both during removal and reinstallation. It goes right on and off with a gloved hand. Thanks!
Best demonstration I have seen on replacing a tire. Thank you. I'm going out to try but don't have a jack.
@@sandytrominski3147 i agree. I’m in the same boat. I’m gonna run to harbor freight and get a Jack
This video sure helped some folks get their tire off, however I have a John Deere 430 lawn tractor that I run AG tires on which are farm use tires so it makes it extremely difficult to get them tires off because of how durable they are.
I have just tried that and it isn't working.
Great video! I watched another video and he was talking about putting a gob of grease back on and around the rim of the new tire?
It is MUCH easier to mount the new tire with some dish soap on the bead of the tire and on the :shoulder" of the rim. Soap on the bead helps it slid onto the rim much easier and on the shoulder of the rim to help the bead slide into place.
And using soap to remove the old tire, or cutting it off.
A little dish soap on the tire bead makes tire installation a hell of a lot easier !
I can’t tell if he’s a mechanic or some sort of comedy boy, but great video, that’s how I would do it too!
Well, I'll admit that I lean more to the comedy boy side!
😃🤣😂💕❤️
Por que no los dos? 😂
Thomas your moms a comedy boy
I just use a cutting wheel on the grinder and cut the old tires off😂 dawn dish washing soap is a good lubricant for the tire going back on done and done ✅
I was wondering why not use a sawzall to remove the tire, being careful not to cut all the way to the rim?
Thanks for being awesome!
Thanks much for the video & tips. Much appreciated. Did people already comment on your passenger? Operator's Manual tells you to never have a passenger on any riding mower. That 1 time in a million when Murphy's law strikes the passenger can fall and be injured or killed either from falling and/or be injured or killed being run over by the tractor. Even just a disfigurement or crippling or dismembering injury would be life changing for the whole family. Every year one or more farmers operating a tractor are stricken with this either riding as a passenger or just by being the equipment operator. Always better safe than sorry.
Idk how I got here, I was looking for a tutorial on how to fix a vacuum, but I watched this entire video for some unknown reason.
Man, you make it look easy, , , , I have a comparable forearm size, but it's still a fight. Thanks for the video (Maybe I need a metric screwdriver)
Awesome video brother appreciate the help 👍
thanks for the easiest how to tire changer video!
Thank you for sharing this.
I’ll give it a try.
I have found for that retaining clip a larger size set of needle nose pliers fits into the voids of the clip and outward pressure did the job for me. I imagine a large set of slip joint (channel lock) pliers would do the job reinstalling em, at least I hope.
I sweat like a pig (i may have hyperhydrosis) so seeing your shirt drenched I dont feel so alone now.. getting tools ready for the job i am doin i am already getting hot and moist. When I used to play basketball at the gym people didnt want to guard me because my shirts were literally soaked like i dunked em in water..
Haha, same here bud. Here in the south the humidity is as dangerous to our health as the sweet tea!😅
Great video!
Glad you enjoyed it
A little dishwashing soap about 50% with water, just a small brush really helps with demounting and remounting tire. On the dust cap I used a small butane torch to heat the cap a little, just don't get the flame to close. A cig lighter would work also.
Why not just use a hair dryer? Much easier than boiling water someplace or setting dust cap on fire and it can get plenty hot.
I'll add something to this. I tried the strap which didn't work. Instead I left the strap on, and did the lighter trick, which worked like a charm.
Thanks for the video - you helped me today!
What size or part is that front tire? I didn't see it in the description
Thank you. Very helpful. Used the knees and with patience it worked!
Dust cap removal tip, use plumbers' pliers to remove the cap. easy peasy. really like your video. Thanks
Which way did you put the washer pocky things in or out 😢😢😢
Someone else had a good idea that works well for breaking the seal on the rims. Set your ladder foot onto the edge of the tire near the rim and stand on the ladder with some force on that side.
While you had everything apart you should have installed a new valve stem and greased the wheel shaft. Great video.
For the cover cap, you might want to try a heat source like a hair dryer set on high heat. I used a heat gun and it worked great. Slid on easy..
Thanks for this exactly what i needed!
I can do all that..... except, how do you boil water?
watching this because I have to change out a tire for the first time in my new lawn tractor….laughing at your Crocs…which I am also wearing currently 😂😂
The video is very helpful. My only question is how do I "throw" air into the tire? I was planning on using my portable compressor. ha ha ha! Seriously, thanks, again! Much appreciated.
Remove the valve core, and pump as much air into the valve as you can. Tighten the strap more to push out the sidewalls to seat the beads easier.
Just wanted to say thanks! Everyone else out here like "Easiest way to remove a tire!" *Uses $200 tool*. You do it with a few screwdrivers and some sweat. This is the way.
Awesome job! That's how I would do it.
Right on!
Changed the rear tire now it will not go forward or backward. Any ideas?
Is there a keyway in your axle and rim? If so, the key probably fell out when you pulled the wheel off the mower.
Lost keyway
Nice vid! I came here to see how to put the dust cap back on.. haha. You can just bounce the tire about once when putting air into it instead of using a strap. That will work on car tires also as long as you have a air nozzle that will lock on.
Some useful tips..
- Use soapy dishwashing water for removing and installing the tire to the rim. WD-40 at the very least.
- Screwdrivers are too sharp and will cut up the rubber. Harbor Freight sells smooth edge tire spoons for working the bead to the rim.. again soapy water. You can also search common sites for tire spoons for motorcycles $10-$20.
- Clean off the old grease on the axle and add some fresh axle grease.
👍
Grease for sure! Why not buy a couple of new valve stems too!
Thanks man! Big help today
I place my tire and rim under the hitch on my truck. I set a small bottle jack on the bead and pump it up. The base of the bottle jack breaks the bead.
Good job. Thats almost exactly how I've done it in the past except I use a claw hammer to pop the dust cap off and tap it back on.
Otherwise the local shop charges $25.00 to do it . I save the money and do it myself.
Did you heat the cap with say a hair drying before using the claw hammer
No, but I do do dunk them I boiling water before I put them back on. They are so much easier to put on that way.
Good video!
One way to avoid the rubber on the dust cap from shrinking too much as it cools is to do the entire job in the kitchen, if you can get the mower through the door of course.
Why not carb cleaner to make tire seal?
I've found that taking the wheel & tire to my local shop and paying them $20 is the easiest 👍
Great vid, thanks man!
I remove the retaining clip but the washers won't even think about coming off the front hub.??? Snapper L200
How do you put the clip back on when it won’t go on
The condition of your inner rim just inspired me to just replace the whole rim with tire
Absolute legend,getting the knees involved sure make it easier! Thanks for the tips.
Do you have to pull the valve stem?
Wouldn’t be a bad idea in case you don’t get all the air out and fight that too when taking it off.
Thin needle nose pliers can get it off too
I also just did this today lol.
One tip: my tires were hard as hell to get off. I ended up laying them on their side, grabbing a 2x6, place it on the tire (with the other end on the ground like a ramp), and jumped on the 2x6 which popped it off :)
What about the back cause I had a John Deere and the back rems didn't come off
Great video and tips. I have a Craftsman Yt4500 that I replaced the rear tire on (similar to how you did it). Only trouble is that when I lowered the tractor again, now it won’t engage in drive! Go figure. I think I forgot to set the emergency brake. The transmission engage lever at the rear when pulled or pushed won’t engage the drive gears now. Now another problem to fix… and the grass is getting longer…. 😮
If your rear axle has a keyway, make sure you installed the "key" when putting the wheel back on.
U lost the keyway. I did exact same thing
Me and my dad been trying to get our old lawn mower rim and tire and we did all the stuff to get the rim off and it just won't get off do you know what could be holding it on by chance?
If u took off the clip & washer, & it doesn’t have a bolt in the middle, u just have too pry it or pull it hard to start it. That happened to me also. Once I got it to move a little, it came off 👍
Checked the comments so I could check out any more tips I can get too as I’m a small female. Can’t believe some of the rude comments. I for one appreciate the help. I will also try adding a few things from the more productive comments. Thanks 😊
Hey, no fair. You said you didn't have help. Thanks for the how to.
Easiest way to get dust caps off is to soften them up with a heat gun. They come right off.
This didn't work for my 4 ply tires. I got about 2 hours in with only one new tire half on before I called it quits. Took it to a local tire shop and they did it for $40. Well worth the money
Nice video man. I appreciate it
Huge help, thanks man!
Thank you Zack
i am disabled and did mine.... I oculdnt take the tire off so I did with the tire on the traacktor.
Why do you have to remove the Schrader valve? What was the purpose of that?
When you inflate the tire to seat the bead, removing the core allows more air to go in faster. Once the tire is seated, remove the strap, install the core, and air it up.
@@robertheinkel6225 I must be dumber than I thought. I thought the little stem in the middle of the valve had to press against the middle of the air chuck to allow the air to flow from the air hose… if you pull that stem out, how what allows the air to flow from the hose?
If you lightly clamp a vice grip to the very edge of the rim you don't have to concern yourself with the bead chasing you around as you go putting the tire on....
Where did you buy the tire
Heat gun on the dust cover caps loosen them right up no issues 👍
Man I really wish you would have shown us how you got the first part of the new tire on... Uhhhg!
trick to seat the bead 5 quart pail and duck tape tape axel hole and put on pail put air to it works great
❤😂😂😂😂😂😂😂🎉Excelente explication, I appreciate
Great video. How do you know exactly what size tire you need and where do you recommend picking one up? This needs to be done to mine soon.
Your current tire has the size moulded into it. Look at the sidewall.
Tractor supply and northern tools had my size in stock today they were both about the same price Amazon had them much cheaper the size is molded into the side of the tire there should be three different numbers like 16X6.50-8 at least that’s how mine was identified
Still don’t understand what cad uses these tires to go bad or pop.
Ok I am 75 in November. Got the wheel off...valve out.... trying to break the seal on the old tire... cant do it. dropped my 200lbs on it with a plank...nope. I need a hint on how to use a jack or something to break the seal on the old tire
Lay it on its side. Grab a short piece of 2x4, maybe 2 to 3 ft long. Lay one end on the tire, just shy of the rim. The other end should be laying on the ground. Slowly and carefully Drive your car up onto the 2x4. This will break the bead every time.
To break bead on mine I had to use a ring of something stiff just bigger than rim ( I used steel since I work in a machine shop) like a old metal coffee can. Used my hydraulic press. Put tire up ring of steel -4x4 - sprayed soapy water and slowly pushed it off.
Where do you find soft tires that stretch?😂
I used the same orange pot too and my wife was pisssed, I guess those orange pot were Rachel Ray brands