That cleat idea is EXCELLENT. Much better than the support board that goes all the way across, which is hard to measure exactly to hold just the ladder frame and not block the door
Is it just me or should those stairs have been installed the other way around so that you are stepping *into* the ceiling space and away from the roof at the top? The way they are positioned at the moment it looks like you would be stepping *away* from the ceiling space and into the roof at the top of the stairs.
He did it that way because he wanted it facing towards the access to the house, he said this 1 min into the video, If he did it the other was he would have to go around it every time he entered the attic, he also covers placement considerations about 2 min 5 seconds in ;D
Gnuthad haha you are exactly right!! He even said specifically that about the head height choice when he was in the ceiling space making the reference holes.2:09
The Screws or nails should be in the center of the peckers! not inches or mm's away. these things need to be installed TIGHTLY peckered! I love this guy! Also, the actual door thickness plywood has to be accounted for and not flush with the "plaster board" so cross braces attached to the ceiling across the opening won't work, The unit will be too high.
Mitre 10 New Zealand I enjoy your videos on TH-cam. What is the name of the white Folding ruler that is used in your videos? Were can I buy one in the U. S. ? I live in LA ca. Thank you Stacieod
When you cut the bottom you should of moved the steps over so the steps could be pushed back.so the angel they come down at would be the same on the bit needing cutting.then made the mark for cutting.i know it not a lot out that the wood take out the 10 to 20mm cut out.
Hi Silvana, you can find our range of attic stairs and their pricing on our website here: www.mitre10.co.nz/shop/hardware/ladders/attic-ladders/c/RF5139 ^Frank 😊
many thanks, just done this today, but to my delight, the cut I had to make was exactly where the step was 😭 so it still have 5mm gap at top stair joint. only took me 90mins to do and 4 cuts later 😀
I would have made all those cuts and layout from up in the attic. no dust in my face or over extending my arms to make measurements. why do it the hard way when the easy way is hard enough?
That cleat idea is EXCELLENT. Much better than the support board that goes all the way across, which is hard to measure exactly to hold just the ladder frame and not block the door
Cheers 😃
Best temporary holders yet. Your the goat....
I used this guys techniques and I was able to install the ladder by myself. Good info and not as difficult as I thought it was gonna be
GunNut.45 o
GunNut.45
GunNut.45 m
W
Going to install attic stairs in the house. This was very helpful since I want to try it myself.
Thanks heaps, glad to hear it!
Brilliant work and you make it look so easy.
Really appreciate the tips here, thank you very much :)
Best attic stair video IMHO
Mate, exactly what I was looking for. Thanks
Good tips. The cleats holding it up temporarily especially, sine ill have to do it all alone.
Very clear information - easy to follow. Well done!
Just measure mine, and found out it was 3 inches too long. Thanks!!
Excellent advice and video
Cheers Simon 👍 ^Meg
Awesome video! Well explained thanks v much
Most every thing this guy is teaching us I what I need for my home!
Fantástico trabajo,👍💪✌️, saludos de Jose desde spain
Thanks Master Excellent Explanation I believe I can do it now, thanks for sharing congratulations.
Great video. Can you tell me the specs of the fasteners used please?? Thanks.
Is it just me or should those stairs have been installed the other way around so that you are stepping *into* the ceiling space and away from the roof at the top? The way they are positioned at the moment it looks like you would be stepping *away* from the ceiling space and into the roof at the top of the stairs.
He did it that way because he wanted it facing towards the access to the house, he said this 1 min into the video, If he did it the other was he would have to go around it every time he entered the attic, he also covers placement considerations about 2 min 5 seconds in ;D
Gnuthad haha you are exactly right!! He even said specifically that about the head height choice when he was in the ceiling space making the reference holes.2:09
Thanks for sharing very helpful
Glad it was helpful! ^Charlie
Thanks for sharing...very helpful
great vid buddy
Mr Todd
How do i connect my xterrea wood beurner to my nturnal hrv system. Nd how do i connect the foil to the smoke stack 😅
Hey Rob, pop in store and have a yarn to the team at your local about your project - they'll be able to offer you some personalised advice ^Meg
Nice detailed Video !
TimebyTime
Amazing step by step instructions.
The Screws or nails should be in the center of the peckers! not inches or mm's away. these things need to be installed TIGHTLY peckered! I love this guy! Also, the actual door thickness plywood has to be accounted for and not flush with the "plaster board" so cross braces attached to the ceiling across the opening won't work, The unit will be too high.
Mitre 10 New Zealand
I enjoy your videos on TH-cam. What is the name of the white Folding ruler that is used in your videos? Were can I buy one in the U. S. ? I live in LA ca.
Thank you
Stacieod
Stacieod Stacieod doc martin
Nice and clear job! I really would like to be ur assistant for one video.
Thanks Peter
If the ladder box was right up against one joist wouldn't it automatically be square. Rather than adjust screws and batten both sides.
When you cut the bottom you should of moved the steps over so the steps could be pushed back.so the angel they come down at would be the same on the bit needing cutting.then made the mark for cutting.i know it not a lot out that the wood take out the 10 to 20mm cut out.
Great job
Great video, T.Y.
Glad you enjoyed it
Thanks
Thanks. Will try it next week :-)
How much would it cost to add the stairs
Hi Silvana, you can find our range of attic stairs and their pricing on our website here:
www.mitre10.co.nz/shop/hardware/ladders/attic-ladders/c/RF5139
^Frank 😊
Cool
He's good.
We can go wood or medal. I got 2 guys working Looking good
Woohoo hope it turns out amazing Maria! ^Cam
many thanks, just done this today, but to my delight, the cut I had to make was exactly where the step was 😭 so it still have 5mm gap at top stair joint. only took me 90mins to do and 4 cuts later 😀
I would have made all those cuts and layout from up in the attic. no dust in my face or over extending my arms to make measurements. why do it the hard way when the easy way is hard enough?
carpenter33 boa tardee tenho muita vontadedeir trabalhar fora do brasil como eu fasço?
Because it's hot in the attic
How to add attic access.
Step 1: Teleport into attic.
That’s one way to do it! 😉 ^Cam
Obviously you had another entrance. How would you recommend making the first entrance? Random cut about head sized?
Dude, my house is made of bricks and concrete.
انا لم استفد شئ انا لا يعنيني ما تشرحه انا اللي يعنيني هو ان اري مكانيكة العمل نفسه
korohemare
You