any advice on doing this on a e65(745) radio swap?? I need to code the new radio from logic 7 to HI-FI ive been told using NCS expert. How would i do this?
I have the same problem after upgrading from ccc to cic, and from standard to Individual audio. The low tones(bass) are really bad. Any idea? Thank you!
Hey Zen. Where did you get the EXPERTMAN profile? I’m in an ‘09 328xi and had to replace the amp. I bought it second hand online off someone. It’s a HiFi and that’s what I previously had. I just don’t think it came out of the same series.
I think it can be coded within the radios hidden menu 😉. Do you know if the display unit can be coded to show current speed km/h instead of gasolin usage ..?
If you mean on the IDrive screen then not that i know of, but you can for the small display on the dashboard. In KOMBI you can change BC_DIGITAL_V to aktiv to enable it. You can also change BC_DIGITAL_V_KORREKTUR to nich_activ to get the true speed on the digital speedometer
The base E90 audio has 4 speakers + 2 subwoofers. It has not got any tweeters, and no amplifier. The radio itself does the amplifying. Therefore, when you upgrade to Hi-FI system, i.e. 2 tweeters in front and 2 in the back + 4 better speakers and 2 better subwoofers + different cable bundle and amplifier in the trunk. If the radio is not coded, it will distort the sound, as it will still try to amplify the sounds and the wiring is different, so it will sound like shit. That is why it needs to be coded, to accomodate the different arhitecture, which is not only plug and play, but different wiring aswell and different ways for the signals, which is different from the signals from the standard setup.
@@legioner9 underetood, but once upgraded via ncsexpert... can the wiring be like: The input signal wire is tapped from the 2 underseat subwoofer to a low/high converter with a RCA output into the amp. Is that okay? As its currently connected this way expect with basic stereo and the sound on the new amp+subwoofer is very low Hope some1 can confirm
@@M12MA There is a thread on bimmerforums which describes how the signals are split between the radio and speakers on the E90, it's like a 15 minute search
@@legioner9 hi - would you know if radio wire out put is high voltage or low voltage output, if you set/ program the radio as HiFI system output?. I am aware of that the radio is set for highly equalised high bass and high diskant in basic/ buisiness/ professionel settings.
![[TH] VALORANT Champions Seoul - Playoffs Day 5 - FNC vs SEN](http://i.ytimg.com/vi/ockeLeCB0wI/mqdefault.jpg)
Hey, maybe you can help me with coding hifi to proffesional radio? Im having base audio now but i upgrade to hifi. Thanks!
any advice on doing this on a e65(745) radio swap?? I need to code the new radio from logic 7 to HI-FI ive been told using NCS expert. How would i do this?
I got e90 base sound system. If I got the BMW hifi Amp can it be direct plug in? Or need special adapter or reprogramming?
Hi, do you have the link for installing the equipment?
Hi, am about to do this coding but can you confirm if it is necessary to code $676 to the VO?
Hello , can i speak to you please ? I have a problem after i upragded my ccc to cic the " bass" ( subwoofer ) dont work
Yes are you able to email me I will see if I can help
I have the same problem after upgrading from ccc to cic, and from standard to Individual audio. The low tones(bass) are really bad. Any idea? Thank you!
@@vrodex1what was your solution
I am planning on upgrading only my base midrange and subs, to the hifi, do I need to code it in?
Did u get an answer?
Hey Zen. Where did you get the EXPERTMAN profile? I’m in an ‘09 328xi and had to replace the amp. I bought it second hand online off someone. It’s a HiFi and that’s what I previously had. I just don’t think it came out of the same series.
If you have ncs expert program on your computer I can email over the different profiles.
@@zensdiy7902 Any help would be appreciated man! Thank you
@@zensdiy7902hello friend can you send it to me pls
@@zensdiy7902 Hi, could you send me the profiles too?
How does this work without I drive just radio?
I think you just code a different module
@@zensdiy7902 But which one? I'm having the same problem ...
Think you can change settings within the radios hidden menu 🤷♀️
Nb - please write a comment, if you have succes with radios hidden menu.
@@legioner9 RAD or RAD2. I couldn’t get it to work straightaway but after leaving the car overnight it seemed to just work.
I think it can be coded within the radios hidden menu 😉. Do you know if the display unit can be coded to show current speed km/h instead of gasolin usage ..?
If you mean on the IDrive screen then not that i know of, but you can for the small display on the dashboard.
In KOMBI you can change BC_DIGITAL_V to aktiv to enable it.
You can also change BC_DIGITAL_V_KORREKTUR to nich_activ to get the true speed on the digital speedometer
I dont think you can change the settings in the secret menu of iDrive. If yes, then how would I do that?
Yes the screen can be coded to show speed but no, what’s shown here regarding radio CAN NOT be coded through hidden menu.
what is the point of this? is this only if you make hardware upgrades?
The base E90 audio has 4 speakers + 2 subwoofers. It has not got any tweeters, and no amplifier. The radio itself does the amplifying. Therefore, when you upgrade to Hi-FI system, i.e. 2 tweeters in front and 2 in the back + 4 better speakers and 2 better subwoofers + different cable bundle and amplifier in the trunk. If the radio is not coded, it will distort the sound, as it will still try to amplify the sounds and the wiring is different, so it will sound like shit. That is why it needs to be coded, to accomodate the different arhitecture, which is not only plug and play, but different wiring aswell and different ways for the signals, which is different from the signals from the standard setup.
@@legioner9 underetood, but once upgraded via ncsexpert... can the wiring be like:
The input signal wire is tapped from the 2 underseat subwoofer to a low/high converter with a RCA output into the amp. Is that okay? As its currently connected this way expect with basic stereo and the sound on the new amp+subwoofer is very low
Hope some1 can confirm
@@M12MA There is a thread on bimmerforums which describes how the signals are split between the radio and speakers on the E90, it's like a 15 minute search
@@legioner9 hi - would you know if radio wire out put is high voltage or low voltage output, if you set/ program the radio as HiFI system output?. I am aware of that the radio is set for highly equalised high bass and high diskant in basic/ buisiness/ professionel settings.
@@legioner9 hi - would you be able to find the link, at share it here?