Thank your so much, I'm learning day by day m love this work like you. if you want to add in facebook my private page, we can exchanging information and idea. You are welcome.
Nice video and cuts! When you program your "tabs" in solidworks are they drawn in at the part or assembly level? Could you post your file so I can have a look at your workflow as trying to find a better way to add tabs with SW. thanks
You can add them in the Cam tree. Under the Contour operation go to Edit Details then the Contour Tab. In the bottom right corner there is a checkmark for Tabs.
What are all the tools and machines do you have in your workshop ? How much did CNC router cost ? I'm an electronics engineer who loves CNCs and wants to setup a mechanical workshop in the near future. Thanks :)
Vishnu M Aiea _ I only have 1 cnc router, band saw, and a few handheld woodworking machines. Cnc Woodpecker DP1212, I bought it for about three years, 13.000 USD. Thank you for watching.
You using straight up water it sure looks like it? If I had to choose between getting the profile path clean or use a "coolant"...I'd go for getting it clean. That watery mess is a re-cut/heat magnet. Also..."coolant" isn't really for cooling but for lubricating ...well technically you can drycut but then you have to feed much faster to reduce heat.....On a CNC router you can do so much better with a single flute at MASSVELY increased federates at near same DOC and a little higher spindle speed....Apart from that you still get the job done...KUDOS. and keep it up :)
What brand machine is this router? I'm a CNC machinist and I've been wanting to get a router for at home, but don't want to be limited to wood. This looks perfect!
Your spindle: how many KW? some thoughts to consider: 1. using a 2nd air nozzle from the left for chip evacuation during misting. 2. use Fusion 360. greetings from Herri in Kunming.
You could have made these easier and quicker and cheaper by just using some flat bar stock of the right size. Just because you have a CNC doesn't mean it's the right tool for the job.
не очень-то экономно... лучше сделать пруток нужного "Т"-профиля и нарезать несколько деталей на ленточной пиле. Она же у Вас есть. так же и по прижимам...
It's look like he "could" do 10 T-block ( 0:51 ) from that material instead of 4, if he split it on band saw. Or he could do it from square bar instead of flat sheet
Yes, you comment very well, do my way is very wasteful. Since I want to share a clear video about machining on cnc router, I have done so. Thank you for watching. hi
great work...thanks for sharing
I loved to see this work, clean, perfect and very useful, it is very inspiring to see the good results of the work with this machine.
Thank you for the compliment. I also like this job very much. Thank you so much!
I will show of the works and machine to my relatives and friends in Brazil.
Great. I saw your factory on facebook and I was so touched by what you did. I have also learned a lot from you
Thank you for sharing!
Thank your so much, I'm learning day by day m love this work like you.
if you want to add in facebook my private page, we can exchanging information and idea.
You are welcome.
Do you use oil or alcohol?
Thanks for sharing, neat work and nice to watch
Tienes los planos de esos diapositivos de amarres estan mu buenos
Subscribed! What kind of band saw do you have?
Ryan Griggs _ Thank you man! My band saw is LUXO U-500.
where do you buy aluminum
Nice video and cuts! When you program your "tabs" in solidworks are they drawn in at the part or assembly level? Could you post your file so I can have a look at your workflow as trying to find a better way to add tabs with SW. thanks
You can add them in the Cam tree. Under the Contour operation go to Edit Details then the Contour Tab. In the bottom right corner there is a checkmark for Tabs.
What does the Ap / Ae mean?
What are all the tools and machines do you have in your workshop ? How much did CNC router cost ? I'm an electronics engineer who loves CNCs and wants to setup a mechanical workshop in the near future. Thanks :)
Vishnu M Aiea _ I only have 1 cnc router, band saw, and a few handheld woodworking machines. Cnc Woodpecker DP1212, I bought it for about three years, 13.000 USD. Thank you for watching.
Great machine, thank you for the videos!
You using straight up water it sure looks like it? If I had to choose between getting the profile path clean or use a "coolant"...I'd go for getting it clean. That watery mess is a re-cut/heat magnet. Also..."coolant" isn't really for cooling but for lubricating ...well technically you can drycut but then you have to feed much faster to reduce heat.....On a CNC router you can do so much better with a single flute at MASSVELY increased federates at near same DOC and a little higher spindle speed....Apart from that you still get the job done...KUDOS. and keep it up :)
Wonder Around _ Thank you so much!
Great video
Em dùng nc v5 bác hướng dẫn em căn tâm phôi với.em gia công toàn lệch tâm
What brand machine is this router? I'm a CNC machinist and I've been wanting to get a router for at home, but don't want to be limited to wood. This looks perfect!
Tony Woodside _ Linear Guide + PMI square block manufactured in Taiwan. Thank you for watching!
Do you have a link?
great idea
Tom S _ Thank you so much!
what is Ae and Ap i couldn't understand.. 🙁
What CAD CAM software are you using?
Paul Devey _ CAD by Adobe Illustrator CS6, CAM by Artcam pro9. Thanks for watching.
What cnc machine do you have??
Kelvin Lugo _ Cnc router Woodpecker DP1212.
ok, thanks. You have a good machine
Nice job!!!
MachiningCoolStuff!!!!! _ Thank you so much!
Thanks for sharing.
Your spindle: how many KW?
some thoughts to consider:
1. using a 2nd air nozzle from the left for chip evacuation during misting.
2. use Fusion 360.
greetings from Herri in Kunming.
Hello herri!
My spindle: 2.2 KW. Thank you so much!
Xin chào, anh có thể cho em biết thông số của máy phay anh đang xài được không. Cám ơn
Thai Le _ Model: Cnc Woodpecker DP1212, trục chính 2.2 kw, hành trình xyz 1200x1200x120mm.
Havel You this Model as Download?
Thank you...CAD files?
Hay quá ba.
cảm ơn con trai!
You could have made these easier and quicker and cheaper by just using some flat bar stock of the right size. Just because you have a CNC doesn't mean it's the right tool for the job.
tuyệt quá đi
hay quá
не очень-то экономно... лучше сделать пруток нужного "Т"-профиля и нарезать несколько деталей на ленточной пиле. Она же у Вас есть.
так же и по прижимам...
78Rey _ Большое спасибо.
ПО не оптимально работает, много холостых проходов. Так же, не оптимизированы заглубления фрезы, ее можно было вообще загонять сбоку заготовки.
Ser Dombr _ Большое спасибо.
So much waste of material ...
Vojtěch how is that a waste of material. The amount of scrap he had was minimal
It's look like he "could" do 10 T-block ( 0:51 ) from that material instead of 4, if he split it on band saw. Or he could do it from square bar instead of flat sheet
Yes, you comment very well, do my way is very wasteful. Since I want to share a clear video about machining on cnc router, I have done so. Thank you for watching. hi