That’s great, neat workmanship to. We have a couple of these late model stock and we use on the property. We just rebuilt the f10a in one but a conversion like this may be the way to go in the other. Thanks for sharing. Bruce
Nice work, I have a late year 04' JDM Jimny Sierra non-vvt 81hp 1328cc (M13A) I want to add Garrett GT1241 Turbocharger and go with bigger tires, currently running 235/65/r16 Falken's. 2" spring lift, looking to install caster correction radius arms and transmission propshaft spacer.
Hay mate! Did you run a jimny sump to clear the diff? No problem there with oil level/flow? Also is there a reason for the jimny rocker? Just looks? Thinking of doing this to my new drover, as there is a few Liana’s around atm
Nice build. did you use an adapter plate between the engine and the gearbox I have Suzuki Samurai swapped 7A-FE ( Toyota corolla 1995 engine 1.8L ) and I am thinking about swapping it to M18A. I would really appreciate it if you can tell me.
Liana was $1000 jimny gearbox $800 donor m13a from jimny for bolt ons $600 efi tank $350 hoses and consumable $200 power steering $500 exhaust connected and cat converter fitted $150 engine mounts $100 plus put new water pump thermostat fan clutch. And many hours in the harness plus piecing it all together
@@tomg8993 VVT is good especially if you turbocharge. Mine isn't VVT, 1328 M13A, R72 AISIN gearbox. Interesting thing the early year 04' and below have the old SN413 gearbox R7ME, this is what Berkeley has here.
That’s great, neat workmanship to. We have a couple of these late model stock and we use on the property. We just rebuilt the f10a in one but a conversion like this may be the way to go in the other. Thanks for sharing. Bruce
Nice work, I have a late year 04' JDM Jimny Sierra non-vvt 81hp 1328cc (M13A)
I want to add Garrett GT1241 Turbocharger and go with bigger tires, currently running 235/65/r16 Falken's.
2" spring lift, looking to install caster correction radius arms and transmission propshaft spacer.
Super clean build, I bought drive shaft slip joint dust boots from Low Range Offroad so they are available
Cheers
We have some to fit
Love it
I have a couple that need this conversion....
Hi man nice build ❤
Im doing an m13a swap in a maruti gypsy does a sierra 1.3 g box wit the m13a or ? Thx a lot
😀nice i have swap 3.5 v6 nissan 🙂
Hay mate! Did you run a jimny sump to clear the diff? No problem there with oil level/flow? Also is there a reason for the jimny rocker? Just looks?
Thinking of doing this to my new drover, as there is a few Liana’s around atm
what type of gearbox u using?
Can a Jimny equipped with an AT gearbox be replaced with an M18A engine?
I want to do this to my samurai
That's awesome build !!!! What model jimny did that transmission come out of ?
It could be m13 from jb43 maybe
Nice build.
did you use an adapter plate between the engine and the gearbox
I have Suzuki Samurai swapped 7A-FE ( Toyota corolla 1995 engine 1.8L ) and I am thinking about swapping it to M18A. I would really appreciate it if you can tell me.
what gearbox are you using for that engine
@@jameskabyemera3614 I am using the stock gear box for Suzuki Samurai
How much did you end up spending for the whole conversion? Looking to do a similar swap when the 1300 in my 95 wt carks it
half a kidney
a G16B would be 3 kidneys and probably rooted
Liana was $1000 jimny gearbox $800 donor m13a from jimny for bolt ons $600 efi tank $350 hoses and consumable $200 power steering $500 exhaust connected and cat converter fitted $150 engine mounts $100 plus put new water pump thermostat fan clutch.
And many hours in the harness plus piecing it all together
It not cheap and it’s labour intensive
@@berkeleysuzukicustoms Hmmm seems I might have to look into other options especially since I heard non-vvt boxes are impossible to find also...
@@tomg8993 VVT is good especially if you turbocharge.
Mine isn't VVT, 1328 M13A, R72 AISIN gearbox.
Interesting thing the early year 04' and below have the old SN413 gearbox R7ME, this is what Berkeley has here.
the gears of the sierra compete did not fit the jimny gearbox?
Didn’t try
The gearing is spot on the way it is.
W H AT