@@jasonirelan4487 The Cyberyronian OG 'Tetra' Seeker mode / mold.. Pretty complex for A mass produced Hasbro Voyager Nootch. Esp the arm transformation- Smart.
I’m kinda late picking this one up and I may be just transforming incorrectly because I haven’t seen else doing this, but I’ve noticed the grey piece on the back of starscreams head has two tabs on the sides of it. If you keep it straight out from his back rather than tucking it in, the shoulder pillars have cut outs on each side that catch those tabs and it then fills in the space between his back and the wings.
I just got this thing on Amazon and OMG you’re 100% right! Otherwise, when I push in the pieces that stand up behind his shoulders, his head tilts back and it never fits right. It’s way too hard to rotate the piece out from inside his back, showing it’s not supposed to go that far back after you disconnect it from his head. If you make it horizontal rather than pointing into his back, it fits perfectly, everything is more secure, and his head doesn’t tilt back. Thank you!
Mung Seldou I just picture the windows being like their eyes in vehicle mode so you could think of it as like a rear gunner bubble or viewport and swivel the guns to the rear to shoot down any pesky autobots following close behind
I just got Thundercracker today. Hooray for spotty waves up here in Canada after the first wave of any line. I honestly don't think I could have transformed him without this video. First problem was figuring out how to pull the backpack so that it would pull away so the nosecone can be formed. The other issue I had was I couldn't get the legs figured out until I did it while following along with this.
Thanks for this Video! Damn Starscream looks Dope in both forms! I absolutely LOVE the Terta-Jet form! Soo glad I decided to invest in the Siege line! Thundercracker and Skywarp up next!
Idk I’m really torn on his “jet” mode, I love how it’s pretty much a Star Wars ship with starscreams paint job, but the bottom is a bit rough lol though I’m not sure how you could make it any more compact than that, so it’s still pretty cool all things considered I suppose
This music reminds me of a 90s Disney movie like a prank scene where some kid is setting booby traps or some other kind of sneakery.... is it bad I can hear "second verse same as the first" on some of the steps? Lol. Good one 👍
Nice, but they should have incorporated his robot mode's chest into the seeker design somehow, instead of just putting it on the back when in seeker mode.
I wanted to just fumble around until i got it but it felt like i was gonna break it :/ edit: i also thought saw starscream on the package and presumed he was the fighter jet, i was very wrong
I know this video is old but I just got this figure today and the back peice does not want to stay on at all during transformation I try to put It on and it just comes right off instantly,I know he addresses it in the review but mine seems worse. Edit: by back peice I mean chest peice.
Is there some kind of trick to getting the head to fold into the torso cavity completely? I can only get it to go part way inthankfully it doesn't seem to effect the transformation to much.
It will, you just have to fight with him. So stubborn I was actually legit worried about mine breaking and there's still clicks that I couldn't get because of it. I think emgo316 has transformed his a few times...
Can somebody please fill me in on what the siege line is supposed to be. I see that many figures are very g1 esq but I don't know where the line came from
It's not the best Cybertron G1 vehicle mode. It's difficult because they wanted to retain a G1-esque robot design but it comes at the cost of the vehicle transformation where it doesn't work quite as well. A decent figure overall, but could've been better. Like I wouldn't pay full price $29.99 for it. $14.99 at most.
@@yeojin4thgenmainslayyer898 A transformer that takes you an hour to figure out because you can't work out how to move a certain piece or get it back into it's out of the box mode so you eventually relent and use a youtube video because the instruction sheet is useless
Sarcasm... Well timed. The _SIEGE_ Seeker Tetra-Jet mode arm transformation alone, seems pretty new, smart & complex to me. For A mass produced Hasbro voyager toy anyway.
^^^^^^^^^^THE FULL REVIEW IS LINKED IN THE DESCRIPTION^^^^^^^^^^
emgo316 have u tried putting a pin of your own to hold that loose plate in place?
th-cam.com/video/Sbe351xIDRQ/w-d-xo.html Siege Voyager STARSCREAM: EmGo's Transformers Reviews N' Stuff
@@jasonirelan4487 The Cyberyronian OG 'Tetra' Seeker mode / mold.. Pretty complex for A mass produced Hasbro Voyager Nootch. Esp the arm transformation- Smart.
oh okay, he's a viper from Battlestar Galactica. That explains why humans lost the war.
I must be old, i so needed this video. Thanks for the save.
I really appreciate the JTI videos. Comes in handy whenever I get a new Transformer. Keep up the good work!
I’m kinda late picking this one up and I may be just transforming incorrectly because I haven’t seen else doing this, but I’ve noticed the grey piece on the back of starscreams head has two tabs on the sides of it. If you keep it straight out from his back rather than tucking it in, the shoulder pillars have cut outs on each side that catch those tabs and it then fills in the space between his back and the wings.
I just got this thing on Amazon and OMG you’re 100% right! Otherwise, when I push in the pieces that stand up behind his shoulders, his head tilts back and it never fits right. It’s way too hard to rotate the piece out from inside his back, showing it’s not supposed to go that far back after you disconnect it from his head. If you make it horizontal rather than pointing into his back, it fits perfectly, everything is more secure, and his head doesn’t tilt back. Thank you!
bro 6 years of owning this figure and I just realized that.
thanks for help dude, fish army will rule the internet
Thank you Dude! Was absolutely clueless as the instructions booklet came in two color without written instructions. You video was absolutely saver!!
When the yellow pilot cockpit don't have any function and ends up as a kibble in vehicle mode is what turns me off
Mung Seldou I just picture the windows being like their eyes in vehicle mode so you could think of it as like a rear gunner bubble or viewport and swivel the guns to the rear to shoot down any pesky autobots following close behind
Apparently mine one's chest keeps on fall apart when you do the step so I just remove and leave his head a little bit exposed
I just got Thundercracker today. Hooray for spotty waves up here in Canada after the first wave of any line. I honestly don't think I could have transformed him without this video. First problem was figuring out how to pull the backpack so that it would pull away so the nosecone can be formed. The other issue I had was I couldn't get the legs figured out until I did it while following along with this.
The instructions are hard to read since it’s basically black and white so this definitely helped
Got this lovable fella for Christmas! Thank you so much, the directions were impossible for me to understand ❤
i'm 42 and had to have help transforming Starscream in 2019. god please save my soul!!!!! Thundercracker is up next!
Im 43 and have same problem lol
Starscream has become a Viper from Battlestar Galatica. Pretty cool.
Just picked up from a Ross store and had to come here. Guns feel more secure mounted on the blue portion of the arm. Thx for this video!
Bot mode looks awesome with the back thrusters.
Thanks for this Video! Damn Starscream looks Dope in both forms! I absolutely LOVE the Terta-Jet form! Soo glad I decided to invest in the Siege line! Thundercracker and Skywarp up next!
Thank you for this demonstration/how to video. Much appreciated.
Thanks man needed this
I didn't see any chest plate problem that people were reviewing about. Thank you for this.
They’re probably talking abt the back of the ship where his chest plate/cockpit is just exposed
Idk I’m really torn on his “jet” mode, I love how it’s pretty much a Star Wars ship with starscreams paint job, but the bottom is a bit rough lol though I’m not sure how you could make it any more compact than that, so it’s still pretty cool all things considered I suppose
More cybertronion
It would be more “screen accurate” if the bottom was just flat from wing to wing.
I know it supposed to represent the g1 seeker but it looks more like the fighter from battle star galactica.
I thought the same thing. "Hey's that's a Viper from BSG!".
@@brainspider Oh lord, it DOES. Which.. I actually approve :D
@@ironraptorstudios Me too, excellent design and I want this one for my collection.
Got this figure for my birthday today, thansk for the help!!!
Thanks dude, neded to check if I was gonna end up snapping the damn thing's head off while TF'ing it XD.
Thanks for this video.
I just got mine yesterday. I'm too lazy to look at the instuctions. This video helped me.
In this Pandemic is most need it. Thanks for the video!
Great video. Thanks. Save time looking at instructions that are hard to understand
Instructions unclear, head won't fit into the back
Thank you!! Saved my nephews Christmas😂😂👍🏼
Nice video 👍 the dark grey and purple instructions included with the figure were confusing
This was incredibly helpful. Thanks!
This music reminds me of a 90s Disney movie like a prank scene where some kid is setting booby traps or some other kind of sneakery.... is it bad I can hear "second verse same as the first" on some of the steps? Lol. Good one 👍
So grateful for this video !!!
Nice, but they should have incorporated his robot mode's chest into the seeker design somehow, instead of just putting it on the back when in seeker mode.
I wanted to just fumble around until i got it but it felt like i was gonna break it :/ edit: i also thought saw starscream on the package and presumed he was the fighter jet, i was very wrong
I had this dude in my collection and didn't even notice. Awesome figure 😊
it makes me think of star wars
I'm happy that Hasbro brought us the Tetra jets 😀😊
Thought this was a robot to vehicle mode not Asmr while doing transformation
It may be just me, but I have trouble pulling the two parts that make up the nose apart. It takes quite a bit of force before it eventually budges.
THANK YOU
Thanks
my favorite shellformer:)
I know this video is old but I just got this figure today and the back peice does not want to stay on at all during transformation I try to put It on and it just comes right off instantly,I know he addresses it in the review but mine seems worse.
Edit: by back peice I mean chest peice.
On my figure the left panel wont tab in to the nose of the tetrajet properly. Any fixes?
Im gonna attatch astrotrauns carrage to his thrusters. Give him a cape.
From a frustrated gramma. Thanks
What music is this in the background?
Thanks for posting. Your vids are incredibly helpful. Instructions are garbage.
Ah yes, the tetra seeker- I saw someone else's review - he had all 3 main seekers plus all 3 coneheads. Wow.
Arcee all over again 🤣
More Than Meets The Eye pt1
Is there some kind of trick to getting the head to fold into the torso cavity completely? I can only get it to go part way inthankfully it doesn't seem to effect the transformation to much.
Shaun Blyth I hesitated at first bc I didn’t want to damage it but you literally just push as hard as you can and it will go in eventually
@@benc8422 I hate stuff like that on transformers were you have to push or pull something as if you basically intend to break it.
Seriously, reminds me of a Battlestar Galactica viper...
0:44 I just broke his arm doing this 😟
Hi emgo are you getting a note seak his name is skywar in the seige line.
Thanks for how to transform starscream
My child hood...
Battlestar Galactica
Please make a video for Double header
Rip me I just got this guy and his head wouldn’t go down during transformation so I cannot transform him ;(
It will, you just have to fight with him. So stubborn I was actually legit worried about mine breaking and there's still clicks that I couldn't get because of it. I think emgo316 has transformed his a few times...
I had to force mine down and then stick a Lego lightsaber through his front torso to get it back up
Can anyone help me on how to fix
Can somebody please fill me in on what the siege line is supposed to be. I see that many figures are very g1 esq but I don't know where the line came from
G1 Cybertron style
upcoming Netflix series
@@Gamealism no...
Soundwave Superior yes
It's not the best Cybertron G1 vehicle mode. It's difficult because they wanted to retain a G1-esque robot design but it comes at the cost of the vehicle transformation where it doesn't work quite as well. A decent figure overall, but could've been better. Like I wouldn't pay full price $29.99 for it. $14.99 at most.
I like it more wen you talk
Its sad to see that transformers have been losing their complexity
define complexity
@@yeojin4thgenmainslayyer898 A transformer that takes you an hour to figure out because you can't work out how to move a certain piece or get it back into it's out of the box mode so you eventually relent and use a youtube video because the instruction sheet is useless
Sarcasm... Well timed.
The _SIEGE_ Seeker Tetra-Jet mode arm transformation alone, seems pretty new, smart & complex to me. For A mass produced Hasbro voyager toy anyway.
You should transformers TE-01 for me I’m trash at it
But I never bought it :(
Starscreams chest mine won’t stay
Charles Baldwin when you pop the head back that little plastic but pops up attach it to that he did that already but i had the same problem
The print instructions absolutely suck. Horrible views and arrows that don't actually show you what to do. Ridiculous.
11695 Macejkovic Extensions
Thanks