hi , you are 100% correct , i had my hexa prop broken :( ,damged some parts, would you please give me the link for the graupner props , and to they fit the dji motor ?
Great video! I am building my 550 now, have FPV and tarot gimbal, I'm a little confused though about CG, I'm assuming I have to determine CG while gimbal and everything is installed right, and how do you determine CG after installing everything including gimbal? I'm assuming you have to enter that CG into XYZ fields in assistant. Thanks and again great vid!
Hi, I just got this hexacopter and I am farily new in building etc. And I am kind of stuck at the part where I need to get the battery on the board for I do not know how to connect my battery to the + - spots on the board. you got this yellow little box on it and I think that I need something like that aswell. I Got a 3000 Mah battery from Mystery. and I just have no clue how t o mount t on the board. Any tip would be aweosme :) Thanks!
Are there 'official' washers? Or did you just use some you had lying around? If you bought 'official' washers which ones did you get? From HobbyKing..??
Looks like you are using a glue gun stick to ensure connectors do not vibrate loose. Is it really necessary? Why not use electronics grade translucent silicone glue which can be applied without any heat?
I dont think i ever saw instructions in any box... There is so much information out there on the net it will take 2 lifetimes to go thru it all., its simple to build one the screw holes only line up one way , and there are 2 differnt size screws
+tracar1 I have a p3 and I want a hex without fpv just to fly around. will my p3p controller work? also what's the difference between Naza m and Naza m lite?
Its personal preferance, some cary more some less, depends on the build, and what you pit in it, some hexas can still gly with one motor gone, where a quad couldnt, also depends on the FC
Hello. Great job. please check our latest EDF hexa copter project. you will be amazed by the power and the flight control. Electric Jet Multicopter I6 EDF 20140306 - 2nd flight - 8minutes - 3.5kg hexa, WKM
that stuff is total crap, use silver solder and u will look like a professional. Plus its better for higher amp draws and has capillary action that drays solder inside small connections quickly without as much heat, leaves a shiney perfect bead, no rosin! ok
I posted while watching. I got mine ordered. look forward to flying it
hi , you are 100% correct , i had my hexa prop broken :( ,damged some parts, would you please give me the link for the graupner props , and to they fit the dji motor ?
I really like the plate you made. Is it copper? Would you be interested in producing more and selling them? I would be interested in 2
Are your two red booms the front of the quad? If so then you got the gps mounted wrong, cable out is the front of the GPS.
I have a dji f450 3 cell 4400 I have the new dji 1038 should I stay with those if am doing fpv or should I get the e prop 10x5 or 9?
How much do you have in this setup? $ ? it looks very nice!
Hi I have a question, support for datalink and GPS antenna is wood? congratulations for your work
Great video! I am building my 550 now, have FPV and tarot gimbal, I'm a little confused though about CG, I'm assuming I have to determine CG while gimbal and everything is installed right, and how do you determine CG after installing everything including gimbal? I'm assuming you have to enter that CG into XYZ fields in assistant. Thanks and again great vid!
Hi, I just got this hexacopter and I am farily new in building etc. And I am kind of stuck at the part where I need to get the battery on the board for I do not know how to connect my battery to the + - spots on the board. you got this yellow little box on it and I think that I need something like that aswell. I Got a 3000 Mah battery from Mystery. and I just have no clue how t o mount t on the board. Any tip would be aweosme :) Thanks!
Good, a long time ago i am looking for this Tuto !!
@tracar1 I got the Naza with GPS , the kit I got comes with 2 sets of blades. Are both no good?
do you fly for sport with the 10inch
would they work with a hovering camera rig?
I'm building the same setup, but I will use 10x5 graupner and 3S batteries... (already ordered)
Do you think I will have problems with this setup?
Got lost at 6:09, but still great vid, subbed, think I might want to get into Copters...
How long did it take in total to put your F550 together? It looks like an afternoons work...?
Are there 'official' washers? Or did you just use some you had lying around? If you bought 'official' washers which ones did you get? From HobbyKing..??
xt60 is enough or should we use xt90? Thanks
does the 1w lawmate get enough cooling?
Raise the compass higher... The electronics can mess it up and cause flyaways
Why did you glue some parts together?
Have you bad experience this? Never seen that before ...
Well I want to stay with the 3cell an stay with 10 props as I carrying weight it weight this 1350g
Hola ! I am curious if you have a template for your custom cut gps mounting plate. Thanks in Advance !
Hi, where can i bay the mounting braket for the gps anntena
Do NOT use the blades except to hover while you wait for your new blades to arrive. Get the graupner blades.
Ok can u watch my new video on the way up it fine but when I start to come down fast it not
silver solder only. radio shack or your hobby store.
Looks like you are using a glue gun stick to ensure connectors do not vibrate loose.
Is it really necessary? Why not use electronics grade translucent silicone glue which can be applied without any heat?
Molto istruttivo.
And it has to also point forward
does it come with assembly instructions?
I dont think i ever saw instructions in any box... There is so much information out there on the net it will take 2 lifetimes to go thru it all., its simple to build one the screw holes only line up one way , and there are 2 differnt size screws
+tracar1 I have a p3 and I want a hex without fpv just to fly around. will my p3p controller work? also what's the difference between Naza m and Naza m lite?
+Michael M one more thing, what is the advantage to a hex over a quad?
Its personal preferance, some cary more some less, depends on the build, and what you pit in it, some hexas can still gly with one motor gone, where a quad couldnt, also depends on the FC
I think the solder will last longer then the craft ;-)....
Hello. Great job. please check our latest EDF hexa copter project. you will be amazed by the power and the flight control. Electric Jet Multicopter I6 EDF 20140306 - 2nd flight - 8minutes - 3.5kg hexa, WKM
Wait- Correction: You did move it up good job lol
that stuff is total crap, use silver solder and u will look like a professional. Plus its better for higher amp draws and has capillary action that drays solder inside small connections quickly without as much heat, leaves a shiney perfect bead, no rosin! ok
u fukking guy make