Holy hell! Thank you! I tried finding just a simple no fuss way to make this cut for framing a window and this did it without all the blah blah bs from other videos. Straight to the point
Finally! 👏 👏 👏 👏 Someone that has actually put a video saying handy trick, actually uploads handy trick for angles video! Everything else sooooo complicated, tools needed and mathematics, which I don't have😅
Thos were some clean jump cuts lmao. So we wouldnt have to see you hacking those peices with that saw. Just saw 1 sec, pause recording, saw all the way through but keep peices looking like there still connected, start recording and pop peices off like it only took a momment. Very nicely done lol.
Yeah he lost all credibility with me. Why not show people that its going to be lots of sweat equity or money in tools in order to do any type of project requiring lumber. Any! In fact, the smaller the project, the more expensive and precise you and your tools will need to be. Precision requires precisely tuned tools or expensive powertools. You should unlife your real life profile for tricking people
@Adrian-vd8rm yea as someone who works with wood and does wood lathing and carpentry. I would never hide the fact that its not easy, its time consuming, its sweaty, not to mention the cleap-up afterwords lol. So much sweeping and or vacuming.
@@Flipp0022 im constantly sweeping, its never ending. Constantly unclogging my shop vac, my poor robot vac wants to delete his own system files if you know what i mean 😅
As someone who does woodworking as a hobby, what's disconcerting is how many are missing the mistake and the problem that joint is going to face when you put it all together. But sure, if you want a no fuss means of putting a frame together, this will work, just won't be very clean and you're highly likely to face issues when putting it all together.
Will this method work with finding out other angles? There's a closet i am doing but the angle is less than 45. The closet corners are more rounded out and not your typical 90 degree corners
writing that X is stupid. you already have the line. this isnt looney tunes. where if you didnt put an X and cut a tree branch instead of the branch falling the earth and the rest of the tree falls.
Thank you for this! ❤ Everything I found was ridiculously complicated!
Thank you so much I have been looking for a easy way make this cut, wow🎃
Thank you. No 9min video wasting out time. Just short and direct. Great job!
Holy hell! Thank you! I tried finding just a simple no fuss way to make this cut for framing a window and this did it without all the blah blah bs from other videos. Straight to the point
Thank you ! Simple and clear
I've searched relentlessly to find a way of doing this that doesn't mean I've got to take out a loan for tools
Thank you so much
Oh my God I’ve been looking for some thing to make this a lot less complicated. Thank you so much.
Thx for sharing yr way is much easier thx again
Thank goodness I finally got it! 🎉
Finally! 👏 👏 👏 👏 Someone that has actually put a video saying handy trick, actually uploads handy trick for angles video!
Everything else sooooo complicated, tools needed and mathematics, which I don't have😅
Thanks just a simple and clear video. was like 90% sure it would go like this.. but nice to see it before the work. :)
Thank you so much... from those of us with few tools
Congratulations, you've made a 45 degree joint. Haha
How to cut a perfect 45° mitre with a hacksaw. Surrre!
Kattakon rahmat usta aka 😊 örganib oldim
Thank you very much for this. Merry Christmas to you and yours
Genial, acabo de hacerlo y quedó exelente 😊
Cut was done elsewhere by machine. I wonder anyone could cut the wood so perfectly. Vedio editing!?
Perfect I can’t say anything else
Nice demo !
Thanks for shearing! Great work!
Let me save this video 😂 thank u!
Melhor explicação que encontrei na net. Fácil e objetivo
Respect for what you show here make g peoaple live easy 💯
Thos were some clean jump cuts lmao. So we wouldnt have to see you hacking those peices with that saw. Just saw 1 sec, pause recording, saw all the way through but keep peices looking like there still connected, start recording and pop peices off like it only took a momment. Very nicely done lol.
Yeah he lost all credibility with me. Why not show people that its going to be lots of sweat equity or money in tools in order to do any type of project requiring lumber. Any! In fact, the smaller the project, the more expensive and precise you and your tools will need to be. Precision requires precisely tuned tools or expensive powertools. You should unlife your real life profile for tricking people
@Adrian-vd8rm yea as someone who works with wood and does wood lathing and carpentry. I would never hide the fact that its not easy, its time consuming, its sweaty, not to mention the cleap-up afterwords lol. So much sweeping and or vacuming.
@@Flipp0022 im constantly sweeping, its never ending. Constantly unclogging my shop vac, my poor robot vac wants to delete his own system files if you know what i mean 😅
Tks good job
This is so unnecessary do people not know what a speed square is or a miter saw I don't understand
So, for those who don't have a miter saw??? Lol.
Use a combi square and a proper tennon saw not a hack saw ..
He didn't sawed that by hand.
Duh!!! They have these things call a SQUARE. Hacksaw my arse.
FREAKIN OUTSTANDING
Sir small wooden box place explain..measurements...
As someone who does woodworking as a hobby, what's disconcerting is how many are missing the mistake and the problem that joint is going to face when you put it all together. But sure, if you want a no fuss means of putting a frame together, this will work, just won't be very clean and you're highly likely to face issues when putting it all together.
Explain
Can i get that saw it was faster than the jigsaw
Hacksaws on table but no sawdust or mark on table surface? Unlees you are a genius with a hacksaw impossible to get such an accurate cut.
You can see the video jump lol
Thank you thank you thank you!!!!!😊
Wow this is great
Will this method work with finding out other angles? There's a closet i am doing but the angle is less than 45. The closet corners are more rounded out and not your typical 90 degree corners
Dustless wood??? 😳😳
New update
Thanks 🙏🎉
I learned how to do this when i was like 4 or somethin'
Then you should’ve posted the video 😅
Thank You 🥰🙏
Ah yes, math. I'd give it a light sanding too so its a bit cleaner
thank you for this
Wood name?
But what about the bottom cut? I get it wrong.
Omg you make that so much harder than it is..😅
Love the music
🎉
Thanks
Thamks
Thank you ❤❤
Merci de la France 🎉
Thanks
Thanks
Thanks
My miter saw does a great job
thanks a lot
Pick yourself up a speed square, they're cheap and saves you time.
help me a lot❤
👏👏👏
What's with the pencell marks on the finished wood?
Bravo
Mantap 👍
That is of course mathematically correct, but relies on end cuts being true 90 degrees
Thank u
Perferct
Good
Tq bro
I hope you don’t do this every time.. but I’ll allow you to learn a better known way to do it
Он МАГ, он совершил чудо.
Thank you po
Ajá!!!!
Nice 🤌 Thanks
writing that X is stupid. you already have the line. this isnt looney tunes. where if you didnt put an X and cut a tree branch instead of the branch falling the earth and the rest of the tree falls.
So eeeee z
El video se interrumpe justo en el corte creo lo haces con maquina.
music name??
Hectorino Martinez - you say
@@gabrielcortes7352 thank you ❤
@@Nhquangr2006 YOU WELCOME 👍🏽👍🏽👍🏽
permit save share
Gawd. That's it? So why all the confusing drama from other vids?
I doubt the angle of the cut would be nicely 45 degrees.
Pfff, common sense, for those that got your mind blown by this are not intelligent.
Comments on here 😆 🤣
What's???
Man 90 angle
🎉🎉❤❤😮😊
Want 38 degree
angle Nahi Kahate😡
Thats 90 degree not 45
It's a 45 degree cuts for each board. Put 2 together makes a total 90. It's a tutorial for cutting
🤦
Do GROMU , Jestem
👎🏼👎🏼one piece was off by like 1mm 🤣🤣nononono no good
was I supposed to learn anything, because that's so obvious