I enjoyed your video very much. That idle mixed with beer took me to a great place. After I destroyed the 6th engine over 20 years in my jet boat, my wife had an intervention. Life support was terminated for my passion of many years. I still have the boat and the usable parts from the last engine build, but until I get a serious cash injection, I will be enjoying the sailboat that came home with me when I brought home the last custom engine. For over 20 years, I enjoyed the sound of a sweet lumpy cam idling on a cold, still, foggy autumn morning. She was built for abuse. She is a 450 hp, 21' double hull, rock crushing, jet powered engine stand, named EUR MUM. Steering wheel, throttle, fuel tank, engine, and jet drive. EUR MUM was the loudest thing on the water, and she easily handled the big load of three large men with everything, for a week, deep in the bush, banging hard the whole time. That idle took me back.
True,we have a 20 foot pontoon with a beand new 115 but our one friend has a 23 foot velocity and he has been working on it,it has a blown and cammed 454 mag amd hes currently working on getting a dual carb setup on it,when he last tested it the engine produced 850 horsepower and 900 ft lb of torque but with the dual carb he said it should make closer to 950-1000 horse and 100 mph to 120 with the current transmission its got in it because with the gearing how it is rn it has a chance of flipping but especially if he was to give it a lower gear ratio giving it a higher top speed it would most likely flip but its already a coffing on the water😂
As a mechanic of 29 years experience (auto) the parts description under the video made me drool! Who ever built THAT engine, knew his $hit!!! Nice bro.
Finally someone let the boat make its own music instead of 80's hairband guitar music over it! I could listen to it clearing its throat all day! Thanks
I had a 500 horse baja, mild build 365 magnum, and this red boat sounds like a 700 horse power boat. You see how he jumps outta the hole..... and gone!!
I have a 88 22 foot stingray. Didn't see the water this year lower unit went bad last year. Saving money to restore the whole boat. Can't wait. That just made me jealous.
Why do you say that? Because he has thru-hull exhaust, clean hull, and a built engine? I don't see anything wrong with what he did. Boat looks clean, sounds good, nothing illegal, and nobody is around on the water during his power pull. He was even far enough away from the dock before accelerating, clearly looks both ways when backing. They way it should be done. Your grounds for calling him a moron are not firmly based. From my 46 years of being on the water, people that put that kind of money into their boats are way more careful than people who only have a small amount, or less, invested into theirs. You're entitled to your dislike of above water exhaust, as much as he is entitled to have it.
Just me Just me Your ridiculous metaphoric comparison makes no sense. But it's a very typical way to respond, nothing more than a feeble attempt at alleviating yourself from your own stupid comment. Stick with your barbecues if thats your thing.
@Just me Just me Dont have to grow one. I was born with one. Old Chinese proverb. Louder the boat the smaller the dick. I'm not the one calling people morons.
Fully jacketed dry exhaust? With the amount of overlap in that cam judging by the idle it would be hard to introduce water any where near the collectors and not see reversion of some level. Just didn't see any water out the tips or overboard dumps out back. I run lightning 2.5 × 4.5 jacketed big tubes on my blown 572 in my howard. Introducing water just before the tips inside the boat. No issues yet. Sounds good. Just the dry exhaust idling on the water caught my ear. Hope it wasn't a lift pump issue and also isn't any water in the motor...
If it was a lift pump issue he'd know it by now---he'd know it by one spin around the lake!!!!! Jim Good point though!!!!!!! You know your outboard drives!!!
If you are judging the HP output by the time it takes him to plane and accelerate, consider this. Most experienced hi perf boaters that have any time behind the wheel of a fast stern drive setup realize the quickest way to grenade a drive is to hammer the throttle out of the hole, especially when you have big horsepower and torque.
It kills me how so many haters in the world say dumb shit trying to knock down peoples hard work. That boat sounds awesome. It got up on plane damn quick !nice boat. piss on the haters there just jealous
I had one of these Stingray boats, they came stock with a carburated 454 that made 330hp and this boat sounds and performs like the stock ones did. Good hull design and was guarenteed to do 72mph + from the factory.
Sounds mean. I'm a nut for loud boats. Got a few myself. I love all boats drag boats that go 260mph in a 1000feet and 50 footers that go 200mph in a mile just badass.
That’s a bad azz boat and the way she got on top of the water amazing…… only seen one flaw, and I’m sure it’s cause you’re young…. Please put on a life jacket and hook up your kill switch! Be safe out there!
@@brook280 ok buddy what ever you say. My Bass boat has a foot feed also and you fall out the she’s still in gear… good luck and have fun and let’s hope your not one of those guys that has learn things the hard way..
Michael LaVoie no it is not. Intake, carb and cam gets 500ish out of a 454 big block done right. My 70 el camino with a 468 with just carb intake cam with stock heads and bottom end dynod 498. Start gettinto the pistons and heads and measing with compression and yoj can get 700+ all day long without a supercharger.
@@supertruckerextraordinaireok let's get 1 thing straight. A boat motor is completely different than a car engine. Regardless look at what you said. You basically have to redesign and rebuild the entire motor. Like I said it's pretty hard to get 700 hp. GM's LS7 7.0L only had 500hp. How do you squeeze 200 more hp out of it an make it reliable enough for a boat with a constant cruising rpm range of 3500 - 4000+ rpm compared to that of a car which is 1500 - 2200?
Thats a BMF! I'm building a 410W for my boat. Has AFR Renegade 220 CNC heads, 1972 351w block, Holley Hi-Ram EFI intake so far. Gonna be 11.75:1 with forged pistons and H beam rods. I have to fabricate the wet headers, should be 550-600hp
Thats cool! Im building a cf12 , mine is a 2003 thats been overand under hauled and sidewsys hauled , it has a g6745qqg78u motor in it and a 44444 cam pistons with a 78: 56 twist , we dropped a 56 gigawatt head gasket in her with 411 gears in the crankshaft , she'll run 45 sec in a quarter with a dial in at 67.8 , the motor we took out was a maytag general electric 339 , with a supercharged battery pack and coil springs , weee doggies she'll run her azz off
I saw this very nice boat in a vid at idle (first start vid) with the drive all the way up. That destroys u-joint's. Seen it happen. I'm not sure how my comment got on this vid. Anyway never start a bout with the drive up.
@Dave Breckon yeah, thats right. i'm more a ford guy so used to saying cams. this push rod old school stuff throws me off haha. maybe they'll put the new ford 7.3 motor in a boat. hmmmmm
Lol, anything above 70mph is a force to be reckoned with and terrifying if you don’t know what your doing in rough water.... Leave it to the real speeds heads who go 80 mph and more in offshore race conditions... 💪 Lol
nice boat, sounds good. Would like to know prop pitch and outdrive ratio you're running with that. I'd think you could twist a 25" or 26" prop at about 5500 rpm with a 1.5:1 outdrive. Nice little 80+ mph ride!
catfishredneck88 The fishermen hate anything not fishing, I have had more alterations heading thru a river access from the popular middle finger, casting of lures at my boat and one guy threw a beer thinking I should slow down for them because they were fishing. Water regulations state not to park or anchor in the access anyway. If I pull off plane the boat throws rollers at them but fishermen are apparently not aware of this neither are the screaming Kayakers. Lol!
Ken Terry I agree, I’m a fisherman myself but I jet ski and boat at the same time. Early morning and late evening is when I fish. If you fish in the middle of the fucking day...what do you expect? Of course there’s going to be noise it’s when everyone goes out on the water. Personally I don’t care. My boat and jet skis are all modified. Some fishermen think that they own the lake. It’s just fucking noise, get over yourselves lol.
Great boat, all these guys talking smack have no clue ,probably don't even own a boat...they must have exray eyes to know it's an alpha...If anything I would guess it's a bravo ...you are getting high RPM'S so that boat does have a valve train that can roll...I build hotrods and boats ,been doing it over 30 years and my opinion is that it would be over 500 HP for sure...it takes serious hp and especially torque to get a big brute up and out like that...don't listen to these keyboard experts...I own a 30'x60' fully tooled shop with a 10,000 commercial hoist on my acreage that I work full time out of.. So I will put my money where my mouth is....
That boats idle sounds like the drum into for Van Halen’s Hot for Teacher...
I'd miss out on alot of education to play those 700 horsepower drums
Haha it totally does!
I knew I heard that somewhere
Haaaaaaaaaaaa!!!!
Right on
I enjoyed your video very much.
That idle mixed with beer took me to a great place.
After I destroyed the 6th engine over 20 years in my jet boat, my wife had an intervention. Life support was terminated for my passion of many years. I still have the boat and the usable parts from the last engine build, but until I get a serious cash injection, I will be enjoying the sailboat that came home with me when I brought home the last custom engine.
For over 20 years, I enjoyed the sound of a sweet lumpy cam idling on a cold, still, foggy autumn morning.
She was built for abuse. She is a 450 hp, 21' double hull, rock crushing, jet powered engine stand, named EUR MUM. Steering wheel, throttle, fuel tank, engine, and jet drive.
EUR MUM was the loudest thing on the water, and she easily handled the big load of three large men with everything, for a week, deep in the bush, banging hard the whole time.
That idle took me back.
WOW, so very many people commenting here with zero knowledge. It's hilarious. Scott Fox, the boat sounds great. Thanks for sharing the video.
I also have zero knowledge. Except that that thing sounds badass.
Ok Mr Einstein 👏
True,we have a 20 foot pontoon with a beand new 115 but our one friend has a 23 foot velocity and he has been working on it,it has a blown and cammed 454 mag amd hes currently working on getting a dual carb setup on it,when he last tested it the engine produced 850 horsepower and 900 ft lb of torque but with the dual carb he said it should make closer to 950-1000 horse and 100 mph to 120 with the current transmission its got in it because with the gearing how it is rn it has a chance of flipping but especially if he was to give it a lower gear ratio giving it a higher top speed it would most likely flip but its already a coffing on the water😂
@@frankgerbrandt8717That's Dr Clownstein Don't mind him he's still living in a box down by the river 😮
As a mechanic of 29 years experience (auto) the parts description under the video made me drool! Who ever built THAT engine, knew his $hit!!! Nice bro.
Finally someone let the boat make its own music instead of 80's hairband guitar music over it!
I could listen to it clearing its throat all day!
Thanks
I know this is an old video, but I'm impressed with the great job that was done with this boat. Up on plane quickly and gone... Nice work..
What make model year of boat is this?
I don't understand why so many negative comments. Very nice boat and sounds amazing.
Not gonna lie I grew a little impatient waiting for the takeoff part
not going to lie I grew a little in my pants waiting for the take off... nice sound🖒
Thanks for posting music to my ears !!
lmao no kidding this thing sounds amazing
Dude happy Gilmore got himself a jet boat sick !
Thats a fantastic boat! Really great exhaust sound and sharp colour!
You'd be the most hated guy on the lake with that boat lol.
Everybody on here talkin shmack like they could drop their prop in the water and skip past this thing... Dude you're boat is set up. Good job.
I had a 500 horse baja, mild build 365 magnum, and this red boat sounds like a 700 horse power boat. You see how he jumps outta the hole..... and gone!!
That thing sounds sick! I love it .
Im pretty sure this is a Stingray Maxim SS 22' 1989 ish
Great looking and definitely got the sound right👍
That boat sounds really good!!
Wow, this is what a speedboat should look like!
And sound like
I have a 88 22 foot stingray. Didn't see the water this year lower unit went bad last year. Saving money to restore the whole boat. Can't wait. That just made me jealous.
Why do you say that? Because he has thru-hull exhaust, clean hull, and a built engine? I don't see anything wrong with what he did. Boat looks clean, sounds good, nothing illegal, and nobody is around on the water during his power pull. He was even far enough away from the dock before accelerating, clearly looks both ways when backing. They way it should be done. Your grounds for calling him a moron are not firmly based. From my 46 years of being on the water, people that put that kind of money into their boats are way more careful than people who only have a small amount, or less, invested into theirs. You're entitled to your dislike of above water exhaust, as much as he is entitled to have it.
Just me Just me Your ridiculous metaphoric comparison makes no sense. But it's a very typical way to respond, nothing more than a feeble attempt at alleviating yourself from your own stupid comment.
Stick with your barbecues if thats your thing.
Just me Just me stop your ranting to everyone.
Just go out and enjoy yourself.
@Just me Just me
Fucking loser lol
@Just me Just me Need a little anger management do you?
@Just me Just me Dont have to grow one. I was born with one. Old Chinese proverb. Louder the boat the smaller the dick. I'm not the one calling people morons.
I love red boats. They looks so nice
Orange buddy
That's really nice!!! So fast, and sound like 🇺🇸AMERICAN MUSCLE V8💪
Fully jacketed dry exhaust? With the amount of overlap in that cam judging by the idle it would be hard to introduce water any where near the collectors and not see reversion of some level. Just didn't see any water out the tips or overboard dumps out back. I run lightning 2.5 × 4.5 jacketed big tubes on my blown 572 in my howard. Introducing water just before the tips inside the boat. No issues yet. Sounds good. Just the dry exhaust idling on the water caught my ear. Hope it wasn't a lift pump issue and also isn't any water in the motor...
If it was a lift pump issue he'd know it by now---he'd know it by one spin around the lake!!!!! Jim Good point though!!!!!!! You know your outboard drives!!!
Big block insanity. Awesome
If you are judging the HP output by the time it takes him to plane and accelerate, consider this. Most experienced hi perf boaters that have any time behind the wheel of a fast stern drive setup realize the quickest way to grenade a drive is to hammer the throttle out of the hole, especially when you have big horsepower and torque.
It kills me how so many haters in the world say dumb shit trying to knock down peoples hard work. That boat sounds awesome. It got up on plane damn quick !nice boat. piss on the haters there just jealous
For Sale: Sleepy lakeview cottage. Close to boat ramp.
Just now seeing this vid, BUT everything about this boat is RIGHT! CAM & EXHAUST NOTE👍👍
I had one of these Stingray boats, they came stock with a carburated 454 that made 330hp and this boat sounds and performs like the stock ones did. Good hull design and was guarenteed to do 72mph + from the factory.
What stingray is this?
@@c_losgarage71 its a maxim 222
Sounds mean. I'm a nut for loud boats. Got a few myself. I love all boats drag boats that go 260mph in a 1000feet and 50 footers that go 200mph in a mile just badass.
Cool story bro
Bud D HARHARHARHAR
Sounds great.👍
I could listen to that all day.
Sounds incredible
That’s a bad azz boat and the way she got on top of the water amazing…… only seen one flaw, and I’m sure it’s cause you’re young…. Please put on a life jacket and hook up your kill switch! Be safe out there!
doesnt need a kill switch, you fall out your foots off the pedal.............its has a accelerator pedal like a car.
@@brook280 ok buddy what ever you say. My Bass boat has a foot feed also and you fall out the she’s still in gear… good luck and have fun and let’s hope your not one of those guys that has learn things the hard way..
That lil girl got some BEEF! I love that damn sound. Good lookin too.
NOTHIN like the sound of a BUILT BIG BLOCK HAUL’N the Mail👏👍👏👍
sounds danm good!!!! i enjoyed hearing just loping! wish mine sounded like that haha
my dad has almost that same boat sounds so different
High lift cams and dry exhaust?
It sounded great and it did take off, more like 699 hp though, I am sure there was 1 missing. V8 heaven. Enjoyed the vid. Cheers. Gee.
my sound say more like 350hp
Plained out in half a boat length. Raw power
Exactly! You need to explain that to all the dumb fucks in the comment section below that say this is not a fast boat.
@@SonnyGTA ANYTHING that sounds like that an I dont care if its a Johnson push mower, its going to have a lot of power.
@Robert Biondo obviously, only thing is it's pretty hard to get 700 hp without a blower.
Michael LaVoie no it is not. Intake, carb and cam gets 500ish out of a 454 big block done right. My 70 el camino with a 468 with just carb intake cam with stock heads and bottom end dynod 498. Start gettinto the pistons and heads and measing with compression and yoj can get 700+ all day long without a supercharger.
@@supertruckerextraordinaireok let's get 1 thing straight. A boat motor is completely different than a car engine. Regardless look at what you said. You basically have to redesign and rebuild the entire motor. Like I said it's pretty hard to get 700 hp. GM's LS7 7.0L only had 500hp. How do you squeeze 200 more hp out of it an make it reliable enough for a boat with a constant cruising rpm range of 3500 - 4000+ rpm compared to that of a car which is 1500 - 2200?
that sounds is priceless
Sounds great!👍
Nice lumpy BB ,I like the red too.
beast!!! man that sounds great...
Love that cammed up idle!
OH THAT SOUND!!!!!!!!! 😀😀👍👍
Sounds amazing!! I recently bought one.
Am I the only one hearing, "Hot For Teacher"
That sounds awesome, love it!! Theres only one thing that sounds better than that and well...you know!
Kahunadog 800hp?
Good pussy 🙄
A 2 stroke😏👼
I’d rather take the boat , a lot less drama. 👍
Tysen Mitchell good pussy SOUNDS better??
Nice boat guy is having fun
Also like the seat in the back whole boat looks and sounds great 👍
Thats a BMF! I'm building a 410W for my boat. Has AFR Renegade 220 CNC heads, 1972 351w block, Holley Hi-Ram EFI intake so far. Gonna be 11.75:1 with forged pistons and H beam rods. I have to fabricate the wet headers, should be 550-600hp
Thats cool! Im building a cf12 , mine is a 2003 thats been overand under hauled and sidewsys hauled , it has a g6745qqg78u motor in it and a 44444 cam pistons with a 78: 56 twist , we dropped a 56 gigawatt head gasket in her with 411 gears in the crankshaft , she'll run 45 sec in a quarter with a dial in at 67.8 , the motor we took out was a maytag general electric 339 , with a supercharged battery pack and coil springs , weee doggies she'll run her azz off
That is one nice boat.
Alotta fun driving that machine !
Holy shit that sounds great!!!
That boat rips!
I saw this very nice boat in a vid at idle (first start vid) with the drive all the way up. That destroys u-joint's. Seen it happen. I'm not sure how my comment got on this vid. Anyway never start a bout with the drive up.
i got a merc 502 with headers but my cams aren't as nasty as yours. nice!!
@Dave Breckon yeah, thats right. i'm more a ford guy so used to saying cams. this push rod old school stuff throws me off haha. maybe they'll put the new ford 7.3 motor in a boat. hmmmmm
That sound reminds me of skiing when I was younger...
@Cory L - I didnt take alcohol to make it badass... It just was.
Nice video.WTF?Where did all these keyboard dyno experts come up with their own horsepower ratings?
Sweet little boat
would be cool to see more vids of this boat.
Love the sound of thru-hull exhaust
Sure would like the opportunity to chat with this guy. I have the same boat. I'd like to know what he did to the out drive to handle the 700 horse.
I had an 89 Stingray with the Magnum in it. Emerald green, solid. Wish I never sold it.
Sounds so nice.
I like it a lot👍👍👍
700 HP or not, boat looks and sounds awesome!!
What boat brand and model is that? Very nice. It’s music for sure👍🏼
With that camera angle my dad's 135hp ski boat looked the same back in the day.
All you people saying this boat isn’t fast have never been on a boat
Lol, anything above 70mph is a force to be reckoned with and terrifying if you don’t know what your doing in rough water.... Leave it to the real speeds heads who go 80 mph and more in offshore race conditions... 💪 Lol
nice boat, sounds good. Would like to know prop pitch and outdrive ratio you're running with that. I'd think you could twist a 25" or 26" prop at about 5500 rpm with a 1.5:1 outdrive. Nice little 80+ mph ride!
Wow awesome sound.
Nice boat, sounds wicked!
Drive's should be down when running at any time. How can anyone build a badass boat like that and not understand the basic's?
jim bo drives are down and were down the entire time
Dude, Man, Guy! What kind of boat is this? Been looking for a water toy and I love the style of your boat.
I have two, Where you located?
MN
Love the sound of a lumpy cam!
So many comments from experts.
SOME ARE SOME NOT. HARD TO FORM AN OPINION TILL YOU DO THE RESEARCH GOOD THING ABOUT THE INTERNET.
@@keithclark2136 ha, you're like me right?
@@keithclark2136 Your "scream at the internet button" is broken old timer.
Hahah for real!! Butt hurt ‘experts’ that don’t own SHIT!
this is freedom in its floating state
Nice 👍 sound great and gets it on for inboard outboard and as big as it is well done 👍 it beautiful boat
I love that sound!
Music to my ears
Some comment about too much cam and lack of torque.. oh how ignorant the google generation has become
Specs on boat ? Build?
What make and model is that thing of beauty?
It’s a stingray 222
@@ECendurowrong it’s a checkmate
@@Johnsonfan169 wrong it’s a stingray
Can i borrow your boat this weekend. My 53 GMC is engineless.. lol Sweet
Nice boat, nice video. No camera shake, no wind noise, idle sound, under power sound. Everything you need. How fast is it?
I’m just here to read the triggered kayakers comments 😀
crazy, that big block is cammed to death
Marine engines are cammed differently. Example, a 327 V8 is cammed differently for the same marine version than from the automotive version.
@@o9rgeronimo979 they are. a regular auto cam would have too much valve overlap. marine cams usually give you low end power
Beatiful boat and sound motor
bet the fisherman love this guy
catfishredneck88
The fishermen hate anything not fishing, I have had more alterations heading thru a river access from the popular middle finger, casting of lures at my boat and one guy threw a beer thinking I should slow down for them because they were fishing. Water regulations state not to park or anchor in the access anyway. If I pull off plane the boat throws rollers at them but fishermen are apparently not aware of this neither are the screaming Kayakers. Lol!
Ken Terry I agree, I’m a fisherman myself but I jet ski and boat at the same time. Early morning and late evening is when I fish. If you fish in the middle of the fucking day...what do you expect? Of course there’s going to be noise it’s when everyone goes out on the water. Personally I don’t care. My boat and jet skis are all modified. Some fishermen think that they own the lake. It’s just fucking noise, get over yourselves lol.
fuckheads like you that's what I expect.
Damn that thing took off
Michael Picozzi a 200 horsepower jet boat would take off quicker than that
Delta says the guy that owns nothing.
RIGHT
Omf. The lovely sounds
OH MY FUCK??
You know it's a solid launch when you barely have a wake
Sounds great 👍
Awesome boat!!👍👍
1:15 before anything happens, then less than ten seconds of wake disappearing across the lake. Nothing impressive shown besides engine noise.
Great boat, all these guys talking smack have no clue ,probably don't even own a boat...they must have exray eyes to know it's an alpha...If anything I would guess it's a bravo ...you are getting high RPM'S so that boat does have a valve train that can roll...I build hotrods and boats ,been doing it over 30 years and my opinion is that it would be over 500 HP for sure...it takes serious hp and especially torque to get a big brute up and out like that...don't listen to these keyboard experts...I own a 30'x60' fully tooled shop with a 10,000 commercial hoist on my acreage that I work full time out of.. So I will put my money where my mouth is....
Like the noise make it louder
Engine sounds healthy but how about a fly by and post top speed