Installing The Speeder Pad G Senor ADXL345 Vibration Compensation Sensor for the FLsun V400 Printer
ฝัง
- เผยแพร่เมื่อ 24 ก.ย. 2024
- Hello Folks:
I hope you are all doing well !!!
Here is a quick video on how to install and use the FLsun ADXL345 Vibration Compensation Sensor.
But, before you do this, please be sure to update the Pad firmware to FLsun V1.4. I will leave instructions on to do this.
Special Thank You to my little girl for helping me with the video. She is truly a very BIG help !!!
Updating the Speeder Pad Firmware to V1.4
drive.google.c...
Dennis, you’re the man. Thank you for your great videos. I had the QQ S Pro and now the V400 for the past year and I appreciate all of your tutorial videos. I recently replaced on my V400 the heating rod, temperature sensor, nozzle, and filament sensor. I also just ran my input shaper and it is running beautifully now.
I am patiently waiting for the S1 to be back on the FLSUN website to order… I can’t wait to see that! Cheers!
Thank you very much Blue !!!
I will be adding S1 to my videos as soon as I get mine...
thanks Dennis another great video ,
Thank you
I recently found out about FLSUN. Probably going to get the S1. Thanks for the videos.
Awesome !!!
Your knowledge sharing, demonstrations and tutorials are awesome. I do hope at some point you'll get a selfie-stick with stabilizer or a camera that will follow you as you move or something like that because there is a lot of shaking that's messing with the quality of the videos, which is unfortunate.
i always appreciate your work
Thank you very much !!!
Good video. Thanks for that.
The positioning of the sensor doesn't actually matter. He can also sit at an angle. The only important thing is that it is plugged into the 3rd slot and that no other devices are connected to the USB port. This can lead to problems, although the reason for this is not known.
OT: My printer has the problem that it doesn't adhere to the dimensions. Despite multiple delta calibration, only 99.3mm (X and Y) are printed at 100 mm. In Z the values at 20mm are approximately 20.3 mm.
Thank you
Can I place it on a desk
I have this exact same issue. XY is about 0.3% off and Z is consistently 0.3mm too tall regardless of how tall the thing I print is. Did you find any solutions for this?
Please do a video on how to upgrade to 1.4. Thanks.
Yes, I can do...
yes please!!
Please!
Thanks for the video! Wouldn't it be better to shut down the pad first and then switch off the printer? That's what I always do.
Hey Denis, thanks for your content.
Do you have any info on the different Speeder Pad PCB revisions ? I saw online that there is the green PCB variant, the blue PCB variant, the 4 USB slots variants and more. I find it interesting.
The first Pad versions shipped with the first V400 did not have the hidden 4th USB port.
did you have to edit your printer.cfg before performing this
At 5:33 I see a couple of ports on the left side of your speeder pad. These ports are nonexistent on my pad. Did you add someting to it? Great video. Thanks very much!
The first versions of the Pad only had the 3 right hand ports. The later versions have a hidden 4th port on the left side...
Wow. Didn't know that. I've only had my V400 for about 6 months now, but I don't have that 4th port. Thanks for the info.
Thank you very much sir. Did you get better printing results after installing ? 😊
Seemed about the same to me... hahaha
Hello sir I've followed you for a couple of years now with my SR I'm very interested in v400 .But I was wondering does cura ( latest) support the v400 thank you !!
Hello Charles. Happy to be of some help with the SR... Big Smile
Yes, Cura 5.4 does support the V400. Let me know if you are interested in a "Like New" V400 when you are ready...
dgignac@flsun3d.com
So it was 43 & 76.6, and it changed to 43 & 78.2, respectively, correct? Doesn’t seem like much of a change, and why can’t you just move the slider on the one that changed from 76.6 to 78.2?
Yes indeed. You can move the slider by hand once you know the number...
@@dennisgignac5103 on a side note, is your Moonraker showing invalid or is that because I haven’t updated to V4.1 yet? I can’t seem to figure out why but the machine still works fine (except my issue with bed adhesion).
Yes, V1.2 does show invalid but that does not affect the printing...
When you go to V1.4, it will be OK...
@@dennisgignac5103 it was, thanks Dennis! Now if I can figure out what’s wrong with my other one. 😖
What is going on with the second V400?
Send me an email
dgignac@flsun3d.com
Nice day master, have any mode to use the M600 code in the QQ-S pro, your knowledge is valuable, thank you.
This doesn't work for FLSUN SR? Thanks
Correct !!!
Grazie ❤
Thanks for the video
Can I apply same procedure for the fysetc ADXL345?
Ciao io ho eseguito la calibrazione con il modulo, ma le stampe hanno avuto un peggioramento.
Ho dovuto inserire nuovamente i valori originali
I have not heard of that happening but I will certainly keep watch for that...
@@dennisgignac5103 grazie della risposta,non saprei proprio dirti come mai successo ciò
Ho contattato flsun a riguardo ma mi è stato detto che questo modulo va montato solo se si apportano modifiche strutturali alla stampante,se inizialmente non si hanno problemi il modulo può peggiorare la qualità di stampa
Così mi hanno detto,ho ancora le e-mail che dicono quello che ho detto.
Mi hanno detto una cosa non vera?
hi,do you have to link to v1.4 download,thanks
how can i do this with the sr?
To be honest, I do not know. I have never had the need to use this on my SR...
Can v1.4 be installed on the SR?
No, just the V400...