That is a really good question. I just played around until I was happy what I was seeing on the screen as well as the HDMI output. So never used the manual. I assume you already tried to Google for the manual. Otherwise, I couldn't tell you. I'm sorry!
I see this one on ali express at around $400 and also some that look identical on their site that show the camera and HDMI output box for $90. It's hard to tell what's right
Ya there are alot of IMX290 fakes going around all with IMX185 sensors so be careful. You will even see some listings say IM290 IMX185 so they can claim they told you.
I'm not sure which one exactly I bought, but you can find them on AliExpress if you search for "PCB Ruler": www.aliexpress.com/wholesale?SearchText=PCB+ruler
I have the microscope but I ha e a few questions 1. How exactly do you turn it off? I just unplug mine, what do you do? 2. 13:50, how do you get all those options, I just have control, I have mine connected to my monitor via hdmi and to the wall but I’m not seeing those extra options idk 3. How do you record? When I plug a drive in it lets me take a picture but says video recording failed. My microscope is on version 2.4.2. Any help would be much appreciated man, thanks!! 😄
Hi Johny! 1. Same thing, I have to unplug it. :) as for 2. and 3. I do not have my microscope here atm (I just moved) so I can't check the firmware. But for the menu, I didn't have to do anything special, just hover to the top left corner and the menu is there. Maybe it is a different version of the microscope?
Is this a 'real' IMX290-based device? It has been shown that many of the hdmi scopes on aliexpress are being marketed as having IMX290 sensors, yet really have inferior sensors (such as the IMX185).
@@DustinWatts Olá, tenho estava a ver este tipo de câmaras. Não sei se o youtube faz a tradução do português para o inglês? Pois tenho estado a estudar a questão dos sensores aprofundadamente.
@@DustinWatts Okay, I see now that you're from the netherlands. AmScope's European representation is located in your country. I've been seeing this camera model on them which is more expensive, but it's a more refined product in the software and with a two-year warranty. the sensor is imx185 which is the most suitable for the lenses I already have.
Hi Dustin, thanks for your clear video. I have found that the camera's without auto focus come in 36Mega Pixel and even 41 Mega Pixel. But with auto focus this specification is left out. Research showed me that the IMX290 is based on a 2 Megapixel architecture. Do you have any idea why this is left out? And how many Mega Pixel it actually is? Looking forward to your answer, kind regards Maikel
It is really easy to get lost in the world of microscopes and their descriptions on AliExpress. I think the confusion comes from the fact that some sellers list the still image resolution, others the video resolution, and some both. I also believe there is a huge difference in image processing.
It’s convenient to solder through it, are there any delays, the depth of the image allows you to accurately get to the place of soldering? Or is it better to use a trinocular microscope?
@Kolin After a bit of practice it is not very difficult to solder trough it. I found that it helps to turn off autofocus during soldering. Also helping is if the light comes from a fixed point. I think a trinocular microscope would be a bit better but this microscope is very good for it’s price!
Hi Kia Ez! There is a very slight delay but not too much. Totally workable for me, but if you are used to a stereoscopic it might be noticeable for you.
@@DustinWatts Thank you for the reply, if money was not a limitation, what is the best digital microscope in your opinion? I have my eye on a a dimo-lite AM5018MZT . latency is a big factor for me.
Excellent video and thank you. Yes I do want one! LOL. Is the second USB for Udisk, as I see sellers put it in their listing. How do you use it with capture card. What sort of hdmi Splitter and capture card you are using? Please explain your set up. Please do another review as you have used for more than a year. Pros and cons would be good.
I use a cheap HDMI splitter from Ali. And capture it with a Avermedia Live Gamer Portable. But for the best results I record the footage on a USB flash drive.
interesting video, I have also one of eakins cameras. but I have problem with white and colour balance settings -have you may be some experience how to solve this??
I can't read this, but Google Translate says you are thanking me. So I choose to believe them and say "You are welcome! :D I hope this is correct ;) : لا تذكرها
Greetings! I was tricked by the seller of the Eakins microscope - Eakins Microscope Store. There is no HDMI image, the sensor sent not a high-quality Sony IMX 290, but a cheap IMX 307. I would like to ask you to check the presence of + 5V on the 18 HDMI contact from the microscope. Is + 5V supplied to pin 20 (VDD5) FE1.1S USB 2.0 HIGH SPEED 4-port HUB Controller? My FE1.1S controller has a №20 pin off the board. Besides, check it out, please. Is there +5V on pin 18 of the HDMI connector?
It seems that many people buying the cheaper versions (which are incorrectly labelled IMX290) and it turns out to be Imx 307. It also seems that all TH-camrs who bought the more expensive £300/350€/$400 “autofocus IMX290” has the correct sensor
@@Pwntyounooblol I paid 414.5 USD for a model with autofocus. And I have an optical sensor IMX307. The seller is a deceiver. Don't buy anything from him. I don't know how to give a link - youtube blocks links.
@@propretor4964 Wow, you are right. I spoke to Eakins today and they say they have recently swapped ALL their autofocus IMX290 to autofocus IMX307 sensor. What a shame... If you find any with IMX290, please let me know.
@@Pwntyounooblol In addition, I got another broken specimen. There is no video signal on HDMI. The FE1.1S USB 2.0 4-port HUB chip has its leg No. 20 (VDD5) torn off. Pin №20 soldered to the board? Look at this, please.
Hi Sorry for being negative, but the titel says Microscope review, but all you do is wasting time babbling about soldering and dirty tweezers...?? Where is the review of the scope. Fifteen minutes, but only three of them is about the scope. This is a soldering video because thats all you talk about...
Too bad you feel this way. I do believe that although it is not and in dept review about all the functions and build quality, it does show the quality of the microscope. Maybe if you mute the video you get a sense of the image quality. And, luckily TH-cam is full of reviews of this microscope and I believe you will find one that suits your needs.
Hi Dustin, that's a nice piece of equipment and a great video to show it! BTW. did you receive my e-mail message? If not, please check your spam folder. In addition to the boards I'll send you some parts which you may find interesting to try using your new microscope...
![[015] Eakins HDMI Microscope & Camera](http://i.ytimg.com/vi/tbdHbQblwm0/mqdefault.jpg)
![[015] Eakins HDMI Microscope & Camera](/img/tr.png)
I just purchased an Eakins HDMI 4K microscope camera. There is no instruction manual. Is it possible to find some? Thank you
That is a really good question. I just played around until I was happy what I was seeing on the screen as well as the HDMI output. So never used the manual. I assume you already tried to Google for the manual. Otherwise, I couldn't tell you. I'm sorry!
@@DustinWatts finally, the seller email me a complete manual instructions in English. 👍🏻
excellent video!
I am struggling with the same thing at the moment. I.e. getting SMD component soldered with a microscope.
Thanks! Practice, practice, practice :)
I see this one on ali express at around $400 and also some that look identical on their site that show the camera and HDMI output box for $90. It's hard to tell what's right
Ya there are alot of IMX290 fakes going around all with IMX185 sensors so be careful. You will even see some listings say IM290 IMX185 so they can claim they told you.
dear sir, what is the name of this scale & where I found it? pls reply. which I saw first (this video time 4:09 minute. )
I'm not sure which one exactly I bought, but you can find them on AliExpress if you search for "PCB Ruler": www.aliexpress.com/wholesale?SearchText=PCB+ruler
I'm super tempted to get an IMX290 for my main m-scope to be able to use either option for my workflow. It does look fantastic!
What is the microscope you now use?
I have the microscope but I ha e a few questions
1. How exactly do you turn it off? I just unplug mine, what do you do?
2. 13:50, how do you get all those options, I just have control, I have mine connected to my monitor via hdmi and to the wall but I’m not seeing those extra options idk
3. How do you record? When I plug a drive in it lets me take a picture but says video recording failed. My microscope is on version 2.4.2. Any help would be much appreciated man, thanks!! 😄
Hi Johny!
1. Same thing, I have to unplug it. :)
as for 2. and 3. I do not have my microscope here atm (I just moved) so I can't check the firmware. But for the menu, I didn't have to do anything special, just hover to the top left corner and the menu is there. Maybe it is a different version of the microscope?
@@DustinWatts yeah I think I have the one that doesn’t autofocus or something idk, thanks though!! 😄
What about latency. Did you mention this? Is there any latency that might make working with a monitor only an issue.
I have not experienced any latency. So latency is not an issue!
Good how to solder SMDs demo
Which wasn't really the point, because my intention was to make a EAKINS microscope review, but thanks anyway!
The power adapter is not 240V its 100-240V so basically it can work anywhere in the world just need a $2 travel adapter
Is this a 'real' IMX290-based device? It has been shown that many of the hdmi scopes on aliexpress are being marketed as having IMX290 sensors, yet really have inferior sensors (such as the IMX185).
If you tell me how I can check for the reallness I will do that and let you know!
@@DustinWatts You can open the case & check the PCB. See this video for more info... th-cam.com/video/1jV7Qzr3OQ0/w-d-xo.html
@@DustinWatts Olá, tenho estava a ver este tipo de câmaras. Não sei se o youtube faz a tradução do português para o inglês?
Pois tenho estado a estudar a questão dos sensores aprofundadamente.
@@terrorista-666- I had to run your comment through google translate, so no :) Although I understand a little Portuguese :)
@@DustinWatts Okay, I see now that you're from the netherlands.
AmScope's European representation is located in your country.
I've been seeing this camera model on them which is more expensive, but it's a more refined product in the software and with a two-year warranty.
the sensor is imx185 which is the most suitable for the lenses I already have.
Hi Dustin, thanks for your clear video. I have found that the camera's without auto focus come in 36Mega Pixel and even 41 Mega Pixel. But with auto focus this specification is left out. Research showed me that the IMX290 is based on a 2 Megapixel architecture. Do you have any idea why this is left out? And how many Mega Pixel it actually is? Looking forward to your answer, kind regards Maikel
It is really easy to get lost in the world of microscopes and their descriptions on AliExpress. I think the confusion comes from the fact that some sellers list the still image resolution, others the video resolution, and some both. I also believe there is a huge difference in image processing.
It’s convenient to solder through it, are there any delays, the depth of the image allows you to accurately get to the place of soldering? Or is it better to use a trinocular microscope?
@Kolin After a bit of practice it is not very difficult to solder trough it. I found that it helps to turn off autofocus during soldering. Also helping is if the light comes from a fixed point. I think a trinocular microscope would be a bit better but this microscope is very good for it’s price!
Whats the delay like? Im thinking to move from my sterio microscope to this.
Hi Kia Ez! There is a very slight delay but not too much. Totally workable for me, but if you are used to a stereoscopic it might be noticeable for you.
@@DustinWatts Thank you for the reply, if money was not a limitation, what is the best digital microscope in your opinion? I have my eye on a a dimo-lite AM5018MZT
. latency is a big factor for me.
How to detect a fake imx290 eakins microscope? Are there any friends who have gained experience in this regard.
Is there +5V on pin 18 of the HDMI connector?
Nice Video what I want! Do you know how much of DOF(Depth of field) is?
I can't really put a number to it, but it is not really big.
Excellent video and thank you. Yes I do want one! LOL. Is the second USB for Udisk, as I see sellers put it in their listing. How do you use it with capture card. What sort of hdmi Splitter and capture card you are using? Please explain your set up. Please do another review as you have used for more than a year. Pros and cons would be good.
I use a cheap HDMI splitter from Ali. And capture it with a Avermedia Live Gamer Portable. But for the best results I record the footage on a USB flash drive.
@@DustinWatts Many thanks and wish you all the best.
thanks for info
You’re welcome Hamad!
@@DustinWatts i made DIY from Sony wx-220 (10$) see my video's ;)
interesting video, I have also one of eakins cameras. but I have problem with white and colour balance settings -have you may be some experience how to solve this??
فظيع وروووعة شكرا على هذا العرض الممتع
I can't read this, but Google Translate says you are thanking me. So I choose to believe them and say "You are welcome! :D
I hope this is correct ;) : لا تذكرها
Greetings! I was tricked by the seller of the Eakins microscope - Eakins Microscope Store. There is no HDMI image, the sensor sent not a high-quality Sony IMX 290, but a cheap IMX 307. I would like to ask you to check the presence of + 5V on the 18 HDMI contact from the microscope.
Is + 5V supplied to pin 20 (VDD5) FE1.1S USB 2.0 HIGH SPEED 4-port HUB Controller? My FE1.1S controller has a №20 pin off the board.
Besides, check it out, please.
Is there +5V on pin 18 of the HDMI connector?
Hey, which one exactly did you buy? Can you share a link?
It seems that many people buying the cheaper versions (which are incorrectly labelled IMX290) and it turns out to be Imx 307. It also seems that all TH-camrs who bought the more expensive £300/350€/$400 “autofocus IMX290” has the correct sensor
@@Pwntyounooblol I paid 414.5 USD for a model with autofocus. And I have an optical sensor IMX307. The seller is a deceiver. Don't buy anything from him. I don't know how to give a link - youtube blocks links.
@@propretor4964 Wow, you are right. I spoke to Eakins today and they say they have recently swapped ALL their autofocus IMX290 to autofocus IMX307 sensor. What a shame... If you find any with IMX290, please let me know.
@@Pwntyounooblol In addition, I got another broken specimen. There is no video signal on HDMI. The FE1.1S USB 2.0 4-port HUB chip has its leg No. 20 (VDD5) torn off. Pin №20 soldered to the board? Look at this, please.
A solda é fe baixa qualidade
I do not speak what I think is Portuguese, but I think your are commenting on the low solder quality? I prefer English as comments to my videos.
USB ports used for mouse and Flash drive. 😉
Hi
Sorry for being negative, but the titel says Microscope review, but all you do is wasting time babbling about soldering and dirty tweezers...??
Where is the review of the scope. Fifteen minutes, but only three of them is about the scope. This is a soldering video because thats all you talk about...
Too bad you feel this way. I do believe that although it is not and in dept review about all the functions and build quality, it does show the quality of the microscope. Maybe if you mute the video you get a sense of the image quality. And, luckily TH-cam is full of reviews of this microscope and I believe you will find one that suits your needs.
Could you get rid of all the „ehm“?
Hi Dustin, that's a nice piece of equipment and a great video to show it! BTW. did you receive my e-mail message? If not, please check your spam folder. In addition to the boards I'll send you some parts which you may find interesting to try using your new microscope...
I missed it. It was indeed in the spam folder :) I've replied. Looking forward to try your PCBs!
this kind of camera is so bad and bad company