Nice video...i would like to know that how long we can use this media and is there any need to clean to clean media after few months and when we are using any medication for fish...does we have to remove media for some time.pls suggest.thank u
Hi sir sorry for much disturbing I have one small question what should I do when I put my pair fish to breeding tank from big tank ? Should I use from my big tank water to ? Because yesterday I put my discus pair to breeding tank my water tap was Sam ph 7 tem 28 tds 100 but in the morning my pair fish die what is the reasons att the die and what should I do now I wait for your answer befor I put my another pair thnx
I have replied to your earlier comment please check.. Also please don't ask the same question in different videos... And this video is not about Discus Fish Breeding tank setup... If you post this comment in that relevant video.. It will be useful for others also...
@@FwrapperAqua I got the filtration point. But since the water is only circulating within the achrelyic cylinder with the k1 media . The oxygen is not getting dissolved in the water, as the bubbles are trapped in the cylinder. Then how does the oxygen mix in the water?
That I Cannot say.. Because it depends on the filter that you are making... There should be good circulation of the media... Just like how you can see in the video
I think it would be more effective if the top cap was peirced with many small holes and it was below water level so that the bubbles could escape back into the water column. Aeration + filtration.
Having k1 media filter n 30% water changed n puting crystal clear medicine in my 45cm small tank n dirt still no sucking n water still cloudy , y ? Is filter perform sucking dirt ? What is filter do actually ? How to have water crystal clear ? Please help , thanks.
Sir im Musthafa from coimbatore im having discuss fishes.for making k1 moving bed filters where can i get that transperant 3 inches dia tubes .at coimbatore i seached every where.where can i gey this transperant tube
It's available in Bangalore... I am sure about coimbatore.. Please follow us on Instagram Fwrapper Aqua or mail me your contact details to ask.fwrapperaqua@gmail.com
www.beenaaquarium.com/k1-filter-media-biofilm-reactor-moving-bed-filtration-media-mbbr-for-aquarium-sump-fish-tank-bio-pond-filter-pack-of-1000ml110g Rs. 199/- per Litre
Please post a video of you tank along with the water parameters.. So we can understand what is issue.. Please follow our Facebook page Fwrapper aqua and post there.. There are lots of experts in our group.. Who can help you... Without seeing the fishes I cannot say anything
Hi sir, I want this type of setup. I’m not able to make this type of setup here. Could you please make that acrylic cylinder one and ship me, I will bare the cost of both shipping and making. Plz do let me know sir.
Another doubt :- Is the water inside acrylic cylinder with k1 media is trapped or does it gets circulated in tank. I hope this question makes sence to you 🤣
Rahul when you pick up ideas from other videos you need to share the original link from which you got inspired and give credit to the original owner. All your videos have some bits and pieces from joey king of diy or this new acrylic creation which is from "fishman". You can visit more of Joey's videos to understand the number of liters of k1 you may need if you want to have only k1 as your filteration.
Hi... Bro my very first video on TH-cam was about moving bed filteration... I have specifically given credits to Joey and Pond guru.. With there images in the video and in the description.The link of that video is also there in this video.. Please do have a look... Since I have done That already... I don't need to do that for all my videos because all my videos are not inspired by someone.. One of the reasons I started this channel is to give more of an Indian touch and make things with materials available here in India...
Thank you
love it
Nice idea really good.
Nice video...i would like to know that how long we can use this media and is there any need to clean to clean media after few months and when we are using any medication for fish...does we have to remove media for some time.pls suggest.thank u
Awesome Idea, I really like it!
Great video
Thank you
Great DIY project.
Could we not use leca/hydroton balls instead of k1/k5 media.
Nice video
Thank you
Your a great discuss breeder, your videos are really informative.
Thank you so much
@@FwrapperAqua will k1 media help in bio filter reactor for reef tank
Great! Now I gotta go out and purchase a giant lathe
You don't need to buy a Lathe.. You can hire it for an hour or so.. Just like what I did 😇😇
Hii..how long we can use this media without cleaning.pls suggest.
Hi.. should we have to continuously switch on the air pump 24hrs a day for k1 media working..pls suggest..thank u.
Every filter and air pump should be running 24x7... Never stop it
O k thank you sir
Hi sir sorry for much disturbing I have one small question what should I do when I put my pair fish to breeding tank from big tank ? Should I use from my big tank water to ? Because yesterday I put my discus pair to breeding tank my water tap was Sam ph 7 tem 28 tds 100 but in the morning my pair fish die what is the reasons att the die and what should I do now I wait for your answer befor I put my another pair thnx
I have replied to your earlier comment please check.. Also please don't ask the same question in different videos... And this video is not about Discus Fish Breeding tank setup... If you post this comment in that relevant video.. It will be useful for others also...
Hii..is there any need to remove k1 media from tank during medication.pls suggest.
great idea sir👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
Thank you so much
He he cool one. Have this in my mind to try out.
Let me know. i have the media in stock
@@FwrapperAqua Sure, will let you know. But I cannot do the fibreglass. I'll try something else.
Can we keep bag filled of lava rock chips / clay balls in any corner of tank or is it necessary the water to pass through it.
Nice vedio thanks .
Is k1 media is effective as double sponge filter
Hi Rahul. Since the cylinder is high and the air bubbles are not mixing in the aquarium, how will the oxygen be absorbed in the water?
Like I said this should not be the only filteration... And since the water is getting circulation inside that will be enough...
@@FwrapperAqua I got the filtration point. But since the water is only circulating within the achrelyic cylinder with the k1 media . The oxygen is not getting dissolved in the water, as the bubbles are trapped in the cylinder. Then how does the oxygen mix in the water?
Sr can i buy k1 media at local shops for little quantity like Below 50 grams cuz i have a 5 gallon tank
Healthy discus 👌
Amazing 😊
When do you change the k1medai
After how many months or days??
That is the best part of K1 media.. You don't need to change it ever... It's keeps going on and on
@@FwrapperAqua thanks
I guess you can use any size sun sun filter?
How much time k1 takes to rotate ....i set this before 4 days but my k1 didn't rotate fully ..just 5-8 pieces only rotating
Great video. How many times a week do you change water.
I change about 30 % water 2 times in a week.. But I siphon out the waste everyday
Very good video sir .
How much K1 media I need in a moving bed filter for 55 gallon African cichlids tank ..??
Please help me sir ..
That I Cannot say.. Because it depends on the filter that you are making... There should be good circulation of the media... Just like how you can see in the video
Nice sir...where I get this k1 media...?In my city this is not available.
I have stock.. Please mail me your number to fwrapper.aqua@gmail.com I will call you
How come the filter pad never gets dirty. I have floating clay balls should work
Thanks for ur video. How do I remove plastic paint from acqurium glass? pls assist me.
You are welcome... I have never used plastic paints on aquarium glass.. Best would be to use a sharp blade and slowly scrap it out...
@@FwrapperAqua Thanks for reply
How frequently should we clean the moving bed filter?
Once it gets really dirty... It's basically a self sustaining media
Hi, since you put the Seachem media inside, how often do you remove to clean (Seachem) or there is no necessity?
When you feel there is too much junk on the media.. Remove and clean with tank water
where to get an acrylic cylinder from ?? please advice
where can we buy the acrylic pipe and other supplies please
Super bro. from where we can buy those acrylic pipes in Bangalore?
I am making this and selling it.. If you are interested please mail me your number to fwrapper.aqua@gmail.com I will call you
I think it would be more effective if the top cap was peirced with many small holes and it was below water level so that the bubbles could escape back into the water column. Aeration + filtration.
I have reduced the water level now so the media stays inside..
Bro frm wer did u get Acrylic cilinder
Having k1 media filter n 30% water changed n puting crystal clear medicine in my 45cm small tank n dirt still no sucking n water still cloudy , y ? Is filter perform sucking dirt ? What is filter do actually ? How to have water crystal clear ? Please help , thanks.
Sir can I use this in aquarium?
Bro from were u r buying discuss I am in kerala if there is any online site pls let me know
Never buy fishes online... You should always select your fishes... Please mail me your number to fwrapper.aqua@gmail.com I will call you
What is the lph of your air pump used in your k1?
I use the sobo 4 output pump
@@FwrapperAqua you use the 4 output of your airpump in just one k1 cannister?
@@mjhobbies6078 no for 4 individual fish tanks... One of the output is connected to the K1
First like first view fist comment
My tank I bought was told by shop staff was 16 liter , 3 gallon for 45cm, bro
please suggest filter for 5x2x1.5 ft
You will need to make an external sump.. It is a very big tank only a sump can handle it
Sir im Musthafa from coimbatore im having discuss fishes.for making k1 moving bed filters where can i get that transperant 3 inches dia tubes .at coimbatore i seached every where.where can i gey this transperant tube
It's available in Bangalore... I am sure about coimbatore.. Please follow us on Instagram Fwrapper Aqua or mail me your contact details to ask.fwrapperaqua@gmail.com
@@FwrapperAqua raghul sir thankyou verymuch for ur reply on call. Sir ur sell discuss fishes
I watched 3 minutes and never saw a MORE COMPLICATED way to make an internal K1 filter 🤣🤣🤣🤣
Looks complicated.. But it's not.. It's fun
Where u buy k1 media
Where we get the acrilic pipe and price of it
It's available in Bangalore... We can source it.. But it's expensive.. It's about 2k for a 2 feet pipe of this diameter
@@FwrapperAqua I want 3\4feet how much it will come
@@edwindhanasekar4575 it comes only in minimum 2 feet length... You will have to buy it and cut it to your size
Bro how to close silicone after using please help me
You need to celo tape and seal it tightly..
Hi Rahul,
I wanted one for me. Can u supply to send to Bglr.
Hi... Currently not available....
Bro from where I can get these k1 moving bed filter???
Bro I have K1 media.. Please mail me your number to fwrapper.aqua@gmail.com
@@FwrapperAqua great how much is the cost per liter. Can you send it to hyderabad?
www.beenaaquarium.com/k1-filter-media-biofilm-reactor-moving-bed-filtration-media-mbbr-for-aquarium-sump-fish-tank-bio-pond-filter-pack-of-1000ml110g
Rs. 199/- per Litre
Even i using big pump with 3.3V for my 45cm small tank but dirt n water still remain same , no improvement.
Hello...
please help me..
again and again my carpet plants are getting decay...it was germinated from seeds....
Please send me your number to fwrapper.aqua@gmail.com I will call you
I'm also part of that 😃
Part of what bro?
@@FwrapperAqua acrylic cutting
Hi sir very nice video.
How much k1 media quantity required for 400 litres
How are you planning to use the K1...?
Sir how to control my aquarium ph. Please reply.
My discus not taking food more than 9 days, I don’t know what to do an how to treat. Help me bro
Please post a video of you tank along with the water parameters.. So we can understand what is issue.. Please follow our Facebook page Fwrapper aqua and post there.. There are lots of experts in our group.. Who can help you... Without seeing the fishes I cannot say anything
can i get this from online ? or you can make it one for me ( 4ft tank). shall pay the cost of filter.
Thanks in advance.
It's a little to expensive.. That is why I stopped making it
I would like to place an order for 2 pieces
Hi sir, I want this type of setup. I’m not able to make this type of setup here. Could you please make that acrylic cylinder one and ship me, I will bare the cost of both shipping and making. Plz do let me know sir.
Where are you from?
@@FwrapperAqua I'm from Chennai sir.
Can you plz share your contact number, I will share my tank to u. So that u can see which requirement fits 😊
Where can i find k1 media?
Please send me an email.. I will send you an amazon link to purchase K1media
parthokarmoker@gmail.com
Are you selling this?
Contact 8617771395
I will message you.. What is the size of your Aquarium... Height... It's a custom product... So based on your height we can make it...
Another doubt :- Is the water inside acrylic cylinder with k1 media is trapped or does it gets circulated in tank. I hope this question makes sence to you 🤣
Water not out
Rahul when you pick up ideas from other videos you need to share the original link from which you got inspired and give credit to the original owner. All your videos have some bits and pieces from joey king of diy or this new acrylic creation which is from "fishman". You can visit more of Joey's videos to understand the number of liters of k1 you may need if you want to have only k1 as your filteration.
Hi... Bro my very first video on TH-cam was about moving bed filteration... I have specifically given credits to Joey and Pond guru.. With there images in the video and in the description.The link of that video is also there in this video.. Please do have a look... Since I have done That already... I don't need to do that for all my videos because all my videos are not inspired by someone.. One of the reasons I started this channel is to give more of an Indian touch and make things with materials available here in India...
Sir from where to buy this acrylic cylinder pls tell me