DIY Bluetooth Speaker The BoomBox IV ( From old broken speakers) - EXTREME BASS TEST 100% LFM

แชร์
ฝัง
  • เผยแพร่เมื่อ 14 พ.ย. 2020
  • Today I created a speaker using a broken old jbl boombox speaker, the sound is perfectly reproduced, the frequency bands are very good, if you like my build please like, sub to support help me
    #diybluetoothspeaker
    #jblboombox
    #extremebass
    * Watch more video
    DIY Bluetooth Speaker
    diybluetoothspeaker
    DIY Portable Bluetooth Speaker Make Using A Domigo A7
    • DIY Portable Bluetooth...
    HOW TO MAKE A THIN SPEAKER I Anh Thợ Mica Tập Làm Loa Tưởng Ko Hay Mà Hay Ko Tưởng !!
    • HOW TO MAKE A THIN SPE...
    How To Make Portable Speaker From Car Subwoofer | DIY Loa Di Động Từ Loa Siêu Trầm JBL
    • How To Make Portable S...
    DIY Speaker Harman 360* So Easy
    • DIY Speaker Harman 360...
    DIY bluetooth speaker using Sony XB31's components
    • DIY bluetooth speaker ...
    DIY Bluetooth Speaker 60W Using Pine
    • DIY Bluetooth Speaker ...
    How To Make Xb41 Bluetooth Speaker From Pine Wood
    • How To Make Xb41 Bluet...
    _______________________________________________________________
    * Music:
    Music promoted by Vlog No Copyright Music.
    The Same Persons - Versace [NCS Release]
    • The Same Persons - Ver...
    Ed Sheeran - Shape Of You (Take/Five Edit) (Bass Boosted)
    • Ed Sheeran - Shape Of ...
    _______________________________________________________________
    * Help Me Reach 5k Subscribe Here:
    th-cam.com/channels/Ksi.html...
    #diybluetoothspeaker #bass #HVCcreation
    #diy #boombox #howtomake #diyspeaker #diy2020 #speaker2020 #restoration #jbl #diybluetoothspeaker #portable #jblboombox #basslow
    #bassbootsed

ความคิดเห็น • 2.2K

  • @FCDynowZKS
    @FCDynowZKS 2 ปีที่แล้ว +396

    The tweeter is sucked in by a large negative pressure in the middle of the housing and as you can see its dome is sucked in and pushed out, vibrates, you need to isolate the tweeters from the bass loudspeaker chamber, besides, the project is very cool, admirable greetings from Poland
    😁

  • @istemihancalskan4089
    @istemihancalskan4089 2 ปีที่แล้ว +63

    You just killed 4 perfect Harman made dome tweeters by not adding filter for them and not isolating it. Congratulations.

    • @donkers228
      @donkers228 2 หลายเดือนก่อน

      Там конденсатор он поставил, смотри внимательнее. А вот в плане отдельного объёма косяк

    • @21CHIMES
      @21CHIMES 2 หลายเดือนก่อน +7

      not to forget that he/she didnt seperate any of the volumes for left and right 🥲

    • @josephrobert2964
      @josephrobert2964 2 หลายเดือนก่อน +1

      @@donkers228he meant to separate those tweeters for there air coming from the sub speakers

    • @theloudspeakernerd-tlsn9322
      @theloudspeakernerd-tlsn9322 2 หลายเดือนก่อน

      Harman made? Those are made by ggec.

    • @Treybe7
      @Treybe7 25 วันที่ผ่านมา +1

      ​@theloudspeakernerd-tlsn9322 he's talking about JBL JBL is owned by its parent company Harmon Kardon

  • @danilosousa171
    @danilosousa171 ปีที่แล้ว +12

    Ficou perfeito. Parabéns 👏👏

  • @MRkWl69
    @MRkWl69 2 ปีที่แล้ว +17

    It’s nice and looks like it sounds good but on the last song the bottom tweeter looks like it’s popping because of the base hitting hard you should enclose the tweeters inside a smaller box internally to keep the sound clean and to prevent the popping

  • @MamadMusicVibe
    @MamadMusicVibe 3 ปีที่แล้ว +1450

    RIP Tweeter

    • @saahilzxz1308
      @saahilzxz1308 3 ปีที่แล้ว +55

      RIP tweeter

    • @ViezeVingertjes
      @ViezeVingertjes 3 ปีที่แล้ว +63

      Whats with the tweeters? because of the pressure of the bass?

    • @MamadMusicVibe
      @MamadMusicVibe 3 ปีที่แล้ว +25

      Yeah

    • @sebutsaja_parel
      @sebutsaja_parel 3 ปีที่แล้ว +5

      😂😂😂😂😂

    • @dennisbauer7123
      @dennisbauer7123 3 ปีที่แล้ว +4

      @@toasted_bagel59 yeah from an boombox that didnt work anymore probably

  • @marpal6049
    @marpal6049 3 ปีที่แล้ว +187

    I advise you to separate the subwoofer chamber from the tweeter chambers

    • @imppmi6973
      @imppmi6973 2 ปีที่แล้ว +31

      I also saw the tweeter moving as well.

    • @joshuawheeler4404
      @joshuawheeler4404 2 ปีที่แล้ว +8

      Yea the lower tweeters aren't gonna last being that they are not sealed unless it a crossover problem and bass is coming through to them but I suspect if that's the case they wouldn't of made it through the demo even you could even just seal the back up with something like hot glue but either way its a very nice build I can only imagine how it sounds in person

    • @Juos10kustu
      @Juos10kustu 2 ปีที่แล้ว +2

      no need.. ethey are closed behind.

    • @joseendungu
      @joseendungu 2 ปีที่แล้ว +9

      @@Juos10kustu Look again, the right lower one is vibrating with the woofers.

    • @Juos10kustu
      @Juos10kustu 2 ปีที่แล้ว

      @@joseendungu ooh shiit thats bad then :D

  • @jasongourdine561
    @jasongourdine561 3 ปีที่แล้ว +27

    This is very impressive!!! Would love to be able to do this.!

    • @sunghee095
      @sunghee095 2 ปีที่แล้ว +1

      This is 2x boombox in custom box

  • @sarhgumede5891
    @sarhgumede5891 3 ปีที่แล้ว

    I Love this Beautiful Speaker Boombox It Sounds Amazing

  • @gabrielvieira6529
    @gabrielvieira6529 3 ปีที่แล้ว +36

    The bottom tweeter is really enjoying the punch bass

    • @hvccreation
      @hvccreation  3 ปีที่แล้ว +6

      Rip tweeter !

    • @gabrielvieira6529
      @gabrielvieira6529 3 ปีที่แล้ว +2

      @@hvccreation yes... r.i.p..

    • @hibahprice6887
      @hibahprice6887 3 ปีที่แล้ว +2

      Especially if it is connected to the same channel as the subwoofer) No crossover

  • @Fra96
    @Fra96 3 ปีที่แล้ว +65

    13:15 the tweeter looool

    • @hvccreation
      @hvccreation  3 ปีที่แล้ว +9

      Rip tweeter !

    • @jvsyoutube3298
      @jvsyoutube3298 3 ปีที่แล้ว +1

      naa, its a wannabe sub only hehe... HVC Creation, what amp is that, looks like you wired it down to 1 ohm per side...

    • @Offhead84
      @Offhead84 2 หลายเดือนก่อน

      @@hvccreation reflex port.

  • @gumigum1982
    @gumigum1982 2 ปีที่แล้ว +1

    This sounds surprisingly good.

  • @fredericoabrantes3425
    @fredericoabrantes3425 3 ปีที่แล้ว +29

    Tenho interesse em adquirir uma!!!
    Parabéns!!!
    Ficou Top!!!

  • @DerekTV21
    @DerekTV21 3 ปีที่แล้ว +167

    No início do vídeo, quando você mostrou as tweeters sendo instaladas no mesmo espaço dos altofalantes de graves. Já imaginei que os tweeters iam danificar. Ficou maravilhoso o projeto.👏 Saudações de um Brasileiro apaixonado por som.🇧🇷♥️

    • @rafa2234.
      @rafa2234. 3 ปีที่แล้ว +21

      ACHEI UM BRASILEIRO AQUI 🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷

    • @DerekTV21
      @DerekTV21 3 ปีที่แล้ว +16

      @@rafa2234. Br tá em todo lugar

    • @rafa2234.
      @rafa2234. 3 ปีที่แล้ว +7

      @@DerekTV21 Ta mesmo

    • @ma3rsk487
      @ma3rsk487 3 ปีที่แล้ว +5

      Ou sera q ele vende isso ai mano q foda qualidade extrema

    • @elvisfreitas7135
      @elvisfreitas7135 3 ปีที่แล้ว +2

      E nós fih

  • @VM-wk1ve
    @VM-wk1ve 3 ปีที่แล้ว +99

    imagine having two broken speakers that are conveniently the same

    • @defnotatroll
      @defnotatroll 3 ปีที่แล้ว +11

      That's the thing lol they weren't broken. 2 perfectly good boombox 2s were harmed in the making of this video

    • @ElinaASMR
      @ElinaASMR 3 ปีที่แล้ว

      @@defnotatroll to get views

    • @ronniebrits938
      @ronniebrits938 3 ปีที่แล้ว +4

      You can take apart the speakers and put it back together pretty easily

    • @VM-wk1ve
      @VM-wk1ve 3 ปีที่แล้ว

      @@ronniebrits938sure u might be able to put most of it back together but to me it looks like the passive radiators have been cut out aint no savin them

    • @defnotatroll
      @defnotatroll 3 ปีที่แล้ว

      @@ronniebrits938 the PRs can't just be put back, and even if you do you've lost the waterproofing

  • @auri3206
    @auri3206 3 ปีที่แล้ว +2

    Im very glad, that you so pedantic making inside equipment

  • @floating.man0_256
    @floating.man0_256 8 วันที่ผ่านมา

    youre literally my favorite TH-camr now just for playing jazz

  • @mroak6504
    @mroak6504 3 ปีที่แล้ว +4

    A custom built JBL!! Great job!!

  • @alexisraro9537
    @alexisraro9537 3 ปีที่แล้ว +27

    Exelente proyecto! Suena como una bestia!

  • @Abr3200
    @Abr3200 3 ปีที่แล้ว

    Man, that's a beautiful monster.

  • @brenin2k56
    @brenin2k56 2 ปีที่แล้ว +18

    q delicia de ver um som desse man

  • @barbaraespino62393
    @barbaraespino62393 3 ปีที่แล้ว +25

    Ah yes the classic “tweeter speake”

  • @businessstartenonlinegeldv34
    @businessstartenonlinegeldv34 3 ปีที่แล้ว +25

    high freq calotte is sucked back by bass.... needs an own space separated from base....

    • @proxyhx2075
      @proxyhx2075 3 ปีที่แล้ว +4

      "high freq calotte"
      Who dafuq calls tweeters high freq calotte lmfao

  • @filteredview9302
    @filteredview9302 ปีที่แล้ว +1

    I bet that sounds incredible clean! good job

  • @user-et8xy9wn9v
    @user-et8xy9wn9v 2 ปีที่แล้ว

    Окуительная колоночка получилась) Лучше любой JBL))

  • @peterdionisio520
    @peterdionisio520 3 ปีที่แล้ว +50

    Enclose the tweeters and you should put crossover or capacitor on them. To prevent the tweeter receiving high current such as bass

    • @babytoy2371
      @babytoy2371 3 ปีที่แล้ว

      Sir pinoy Po kayo?

    • @hondacity648
      @hondacity648 3 ปีที่แล้ว +3

      Was just about to say that.. poor thing needs a 4.7uf cap and should be isolated from the punching and abuse

    • @KlodFather
      @KlodFather ปีที่แล้ว

      He did put a cap in... It was big and yellow in the wiring. Go check the video again. Good of you to note that but the cap was there.

  • @saqui2323
    @saqui2323 3 ปีที่แล้ว +175

    13:35, even that tweeter is trying to produce bass

    • @hvccreation
      @hvccreation  3 ปีที่แล้ว +44

      yeah, rip tweeter

    • @officialhyperman
      @officialhyperman 3 ปีที่แล้ว +7

      @@hvccreation did it survive?

    • @eddiebaby22
      @eddiebaby22 3 ปีที่แล้ว +3

      😂 Tweeters not great for bass

    • @FordForTheWin
      @FordForTheWin 3 ปีที่แล้ว +3

      i can see the capacitor installed though!

    • @childishtombino1275
      @childishtombino1275 3 ปีที่แล้ว +7

      @@FordForTheWin Yeah it could be that it's either running full range somehow through miswire, or if the tweeter isn't a sealed component, the air pressure could be affecting it.

  • @bratetsbratets662
    @bratetsbratets662 ปีที่แล้ว +1

    Спасибо за ролик. Очень круто! И самое главное без лишней болтовни.
    Привет из России!

  • @ramonleal2565
    @ramonleal2565 ปีที่แล้ว +4

    Top o som parabéns 👏👏👏

  • @akashi_2788
    @akashi_2788 3 ปีที่แล้ว +4

    I love when the speaker went ~~

  • @wiktor9632
    @wiktor9632 3 ปีที่แล้ว +275

    13:35 look at the high frequency speaker lmao

    • @hvccreation
      @hvccreation  3 ปีที่แล้ว +43

      thx bro, i repaired it

    • @Aw4yed
      @Aw4yed 3 ปีที่แล้ว +5

      I was wondering lookig the big subwoof that it's just a visual effect then replayed and lmao the thing were exploding xDDDD

    • @Locked.1
      @Locked.1 3 ปีที่แล้ว +7

      @@Aw4yed the 4 in front are speakers and the one on the side at this time stamp is called a passive radiator. Passive radiators make blue tooth speaker water proof and make the bass sound better then would be if it was open on that side.

    • @gazda6999
      @gazda6999 3 ปีที่แล้ว +2

      AHAHAHAHAHAHAHHAHAHAHHAAHHAHAHAHHAHAHAHAHAHAHAHAHHAAHAHA

    • @ahernandez4695
      @ahernandez4695 3 ปีที่แล้ว +2

      its a hybrid ! 🤣😆🤣😆🤦‍♂️🤷‍♂️

  • @raymondrespress711
    @raymondrespress711 3 ปีที่แล้ว +4

    Very nice custom building I love it and especially the sound quality.

  • @valdisneinilo8040
    @valdisneinilo8040 3 ปีที่แล้ว +4

    show... um projetos desse aqui no Brasil vai custar muito caro... mas o video doi top

  • @tarcisioalef6456
    @tarcisioalef6456 3 ปีที่แล้ว +7

    Muito bom ( Brasil )

  • @cassiobernardobernardo5052
    @cassiobernardobernardo5052 3 ปีที่แล้ว +5

    Linda demais essa mandou bem

  • @Mestre-Joe
    @Mestre-Joe 2 ปีที่แล้ว +22

    Meu Deus, tô me imaginando com essa caixa em cima da montanha lá nos Três Picos
    Tudo bem que tem que levar junto uma bateria de carro lmao mas ficou perfeita, olha esse grave!

    • @vitorguimaraes6547
      @vitorguimaraes6547 ปีที่แล้ว +1

      kkk Esta é a braba!! Preciso aprender a montar uma igual

    • @giovannidesouza2556
      @giovannidesouza2556 7 หลายเดือนก่อน

      Ahhh não, por favor jovem... Não desrespeite a montanha... Montanha é lugar de paz, tranquilidade e, principalmente, silêncio...

  • @RAPHKOBI
    @RAPHKOBI 2 ปีที่แล้ว +5

    No matter how long the video is, I was just relaxed waiting to hear how it will sound to my ears.

  • @etr32901etio
    @etr32901etio 2 ปีที่แล้ว +23

    If you ever plan to sell it I’ll give $500 🕶

  • @cuentos.narrados
    @cuentos.narrados 3 ปีที่แล้ว +3

    such a nice build but you probably are suffering from comb filtering for using 2 tweeters per channel, 1 tweeter is better than 2 o 3, in case of tekton speakers they use a different crossover setup for every tweeter groups achieving a beaming effect that is really nice.

  • @pastoredinaldodeodato589
    @pastoredinaldodeodato589 3 ปีที่แล้ว +3

    muito massa gostei nota 10

  • @CristianLopez-xx2cc
    @CristianLopez-xx2cc 3 ปีที่แล้ว +1

    I need one, amazing work

  • @marcoseditorofc
    @marcoseditorofc 3 ปีที่แล้ว +10

    Vou montar uma assim top 🔥🔥🔥

  • @FLUFFS
    @FLUFFS 3 ปีที่แล้ว +33

    Damn, that Boombox 2 was broken? 😱

    • @Adisz1919
      @Adisz1919 3 ปีที่แล้ว

      Idk lol

    • @AiReadyGone
      @AiReadyGone 3 ปีที่แล้ว +2

      Гей

    • @tomjam2876
      @tomjam2876 3 ปีที่แล้ว

      don’t believe it was broken

    • @shadow2.0.0
      @shadow2.0.0 3 ปีที่แล้ว

      Oh! Hi bro

    • @IchmagPizza
      @IchmagPizza 3 ปีที่แล้ว

      Denke mal der hat sich extra 2 gekauft

  • @mundoextraordinario8454
    @mundoextraordinario8454 ปีที่แล้ว +1

    Projeto perfeito

  • @garikzmusic
    @garikzmusic 3 ปีที่แล้ว +3

    Good job 🔊🎶👍
    *like and comment*
    *Thanks*

  • @cleberfernandes2056
    @cleberfernandes2056 3 ปีที่แล้ว +11

    Perfect!!!

  • @sonicrulez111
    @sonicrulez111 3 ปีที่แล้ว +8

    The same song repeating over and over again makes this video feel an hour longer than it actually is

  • @ducmanhpham195
    @ducmanhpham195 3 ปีที่แล้ว +2

    Rất sáng tạo

  • @jabulanitshabalala9378
    @jabulanitshabalala9378 ปีที่แล้ว

    Thank you for the music 💯👌🏾

  • @duzinsom7319
    @duzinsom7319 3 ปีที่แล้ว +3

    JBL Boombox 5 confirmed 👍🏽

  • @miknord5493
    @miknord5493 2 ปีที่แล้ว +3

    13:36 🔈 Even the tweeter moves there!

  • @Kidtoucher300
    @Kidtoucher300 2 หลายเดือนก่อน

    beatiful DIY project

  • @Kuuiby
    @Kuuiby 3 ปีที่แล้ว +17

    Hi, nice work, but there is a problem on the tweetwer in the lower right in the foreground, on the low frequencies it bends, it shouldn't happen. Didn't you put a high pass filter on it?

    • @thebedrockboy8559
      @thebedrockboy8559 4 หลายเดือนก่อน

      There’s a high pass but he didn’t seal it off from the woofers

  • @joseezequielpuentesavila5298
    @joseezequielpuentesavila5298 3 ปีที่แล้ว +4

    Orales que chido que bueno que tengo los materiales necesarios para hacerla

  • @Govindkumar-xb3pk
    @Govindkumar-xb3pk 3 ปีที่แล้ว +5

    Bahut badiya bhai.... Like

  • @shibbu1558
    @shibbu1558 3 ปีที่แล้ว

    i need this in my room ❤️

  • @vinodroshandsouza3369
    @vinodroshandsouza3369 3 ปีที่แล้ว +1

    Awesome work superb 👌👌👍 clean and clear 👏🙏

  • @dibakarboruah00
    @dibakarboruah00 3 ปีที่แล้ว +3

    Awesome.

  • @sasahypnotic1824
    @sasahypnotic1824 3 ปีที่แล้ว +9

    The design is fire , love the 4 speakers in front

    • @hvccreation
      @hvccreation  3 ปีที่แล้ว +2

      thx bro

    • @Frost620
      @Frost620 ปีที่แล้ว

      @@hvccreation what is this side plate called?
      Where you get those?

    • @Ani...888
      @Ani...888 5 หลายเดือนก่อน

      ​@@Frost620 they are called radiators
      They are boom box radiators

  • @saggitariusmorris9090
    @saggitariusmorris9090 2 ปีที่แล้ว +2

    I love those speaker 🔊❤️❤️❤️❤️

  • @nice9355
    @nice9355 2 ปีที่แล้ว +1

    Wow love that flex on the passive radiator and the spears when the bass hits. Do you know any place that i can but these boombox woofers and passive radiators for a cheap price.

  • @HuyNguyen-hf9nz
    @HuyNguyen-hf9nz 3 ปีที่แล้ว +4

    Amazing 👍👍👍

  • @Chalta_phirta_offical
    @Chalta_phirta_offical 3 ปีที่แล้ว +4

    I want to listen this speaker in real life 😍😍😍

  • @sajitha_fonseka3578
    @sajitha_fonseka3578 2 ปีที่แล้ว +1

    Loved it. Wanna a build one for myself. If you can give the list of items with links to buy them would be great. Thanks.

  • @besoff6241
    @besoff6241 3 ปีที่แล้ว +8

    Пипец нижний Твитер флексит 🤣🤣🤣😱

  • @caleb22lr
    @caleb22lr 3 ปีที่แล้ว +11

    13:36 that tweeter hits hard

  • @rebelliongaming2651
    @rebelliongaming2651 ปีที่แล้ว

    The bass dropped so hard that tweeter turned to a subwoofer. 🔥🔥🔥

  • @atdunson
    @atdunson 2 ปีที่แล้ว +1

    Now that you're done,, do you think 4 passive baffles were needed instead of 2? Wouldn't some pillow fluff inside help the bass a little? Since the enclosure is larger than those speakers were intended....

  • @tusdomestic7448
    @tusdomestic7448 3 ปีที่แล้ว +15

    The tweeters should have an separate chamber for themself but other than that great job

  • @GuiDJBro
    @GuiDJBro 8 หลายเดือนก่อน +5

    13:34 , O único problema da caixa, é a ligação dos tweeters. Já que estão ligados na mesma conexão que o grave, mas tirando isso eu amei! Parabéns!

    • @dudulz.
      @dudulz. 8 หลายเดือนก่อน +1

      Na verdade, é a circulação do ar por dentro, acaba fazendo a bolha do tweeter como radiador passivo (tampas pulsantes nas laterais)

    • @DjDk
      @DjDk 5 หลายเดือนก่อน

      O certo seria isolar o twts ?

  • @electrohigh9777
    @electrohigh9777 หลายเดือนก่อน

    I thought I was the only one who saw the tweeter jumping with the pressure from the woofers, hahaha!

  • @marcelonolasco6332
    @marcelonolasco6332 2 ปีที่แล้ว +1

    king, awesome !!! los detalles y la calidad de audio es exclusiva muchas felicitaciones gracias por compartir terrible proyecto...
    song name from the test?

  • @kleydygouveia
    @kleydygouveia 3 ปีที่แล้ว +7

    😍JBL ❤👍👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻.

  • @aDhD420
    @aDhD420 3 ปีที่แล้ว +3

    I love the build so much but the tweaters need to be sealed off in the box the pressure is deforming the bottom right tweater

  • @gregula8080
    @gregula8080 ปีที่แล้ว

    yikes!! cool project! gotta isolate tweeters, or use sealed back style. i would have sanded more (or sanded at all). Other than that, i'm impressed!! Nice work. I'm working on one similar in some ways and also plugs in to AC power with NO battery pack option.

  • @hughali6987
    @hughali6987 ปีที่แล้ว +1

    Una mascarita más a la frontal negro o de otro color y ya tienes una joyita de equipo 😀 saludos desde Bolivia 🙂

  • @robodock23
    @robodock23 3 ปีที่แล้ว +3

    Great idea. But you need a crossover for your tweeters and they need to be separated in a box from the other speakers

    • @lestergranger1685
      @lestergranger1685 3 ปีที่แล้ว

      Look at his cabling... theres an axle camp in there on both sides..

  • @z33hayden23
    @z33hayden23 3 ปีที่แล้ว +9

    Dude! This is amazing 👍
    Love the innovation 💯

  • @dreivennuggets
    @dreivennuggets 3 ปีที่แล้ว +1

    You can make the tweeters their own housing, they can be destroyed with the excursion, but overall good work 👏👏💯

  • @fernandocosta4982
    @fernandocosta4982 ปีที่แล้ว +2

    Ficou linda essa caixa de som... se eu quiser fazer uma quando eu iria gastar, você sabe mim informar?

  • @kylevad9943
    @kylevad9943 3 ปีที่แล้ว +20

    Great concept love the idea. Work on your painting skills and you’ll be golden, saw some nasty paint runs. I’d recommend double baffle on the front to hide the speakers mounting brackets. Mid woofers looks pretty good I’d run little higher grade tweets with some actual mounting tabs or something. Passive radiators are dope man never thought to use ones off JBL cool idea.

    • @hvccreation
      @hvccreation  3 ปีที่แล้ว +5

      thx bro

    • @fafabear6494
      @fafabear6494 2 ปีที่แล้ว +1

      @@hvccreation ?okk

    • @sunnisshining1031
      @sunnisshining1031 2 ปีที่แล้ว

      I thing bro iss correct... Tweeter

    • @sunnisshining1031
      @sunnisshining1031 2 ปีที่แล้ว

      Bro ur speekar are not speakers is a like a boms.. 🔥🔥... Plzz send me ur contact...

    • @KlodFather
      @KlodFather ปีที่แล้ว

      I think he should have used coax speakers then the tweeters are outside and not under pressure as well as the metal bridge across the woofer supporting the tweeter and/or midrange protects it from "Ger Fingerpoken" and "Ger Mitten Grabben" :)

  • @yanlli511
    @yanlli511 3 ปีที่แล้ว +25

    JBL 179.95 🔊🔥🙀

  • @jacobforester
    @jacobforester 2 ปีที่แล้ว +1

    thumbnail looked like a laundry machine and a huge speaker in the front / side

  • @andrewverran3498
    @andrewverran3498 6 หลายเดือนก่อน

    Don't think JBL would like this...expect a call from their lawyers...lol.😊

  • @killaart6261
    @killaart6261 3 ปีที่แล้ว +16

    Покойэтесь с миром твиттера 🖤

    • @alexsol3517
      @alexsol3517 2 ปีที่แล้ว

      Один нижний. Интересно, чё это с ним? Не приклеен? Мимо фильтра? И басы выдавливают диффузор? С верхним ведь этого не происходит.

  • @user-to2zw2dr8w
    @user-to2zw2dr8w 3 ปีที่แล้ว +26

    Для пищалок нужно делать герметичный отсеки отделёные от сабовых динамиков. В конце видео видно что от давления пищалки гнёт во внутрь

    • @alexsol3517
      @alexsol3517 2 ปีที่แล้ว

      Но это происходит только с нижней пищалкой. Что-то с ней то: то ли не приклеена, то ли мимо фильтра (конденсатора, которого, кстати, не видно в видео), и басы "выплёвывают" диффузор. Но эти твиттеры необязательно отделять аккустически, они сами по себе герметичные сзади.
      Да и пассивный излучатель иногда волнами ходит. Короче, для пацанов сойдёт: Бум-ци, Бум-ци...

    • @mrtuananhquangxuong2
      @mrtuananhquangxuong2 2 ปีที่แล้ว

      you are right..

  • @ysf79
    @ysf79 3 ปีที่แล้ว +1

    Afferim emeğine sağlık çok güzel olmuş ☺️

  • @jovanmilenkovic2096
    @jovanmilenkovic2096 2 ปีที่แล้ว +1

    Best speakers!

  • @leonardonunes5739
    @leonardonunes5739 ปีที่แล้ว +4

    Top seu projeto de som JBL 👍✌️👏👏👊👊👊

  • @electricpower_ua
    @electricpower_ua 3 ปีที่แล้ว +17

    А ноготь на мизинце такой, это что-бы изюм с очка доставать...

    • @valdisneinilo8040
      @valdisneinilo8040 3 ปีที่แล้ว

      se tu conseguir entender o que eu falo eu te ensino a fazer uma igual esta

  • @tebarsejutapesona477
    @tebarsejutapesona477 ปีที่แล้ว

    Sambil mengerjakan sambil pula menerangkan jd pemula lebih memahami dn mengerti 🙏

  • @frosty9318
    @frosty9318 3 ปีที่แล้ว +2

    13:35 ey that mini speaket

  • @m3n4cE6
    @m3n4cE6 3 ปีที่แล้ว +16

    tweeters need to be sealed off in their own compartment, good idea though...

    • @mansuriaftab4850
      @mansuriaftab4850 3 ปีที่แล้ว

      Tweeters don't need compartment

    • @palledrengens
      @palledrengens 3 ปีที่แล้ว +2

      @@mansuriaftab4850 if tweeters membrane is enclosed then No, but if they are visible then YES! also midrange speakers have to be sealed, that will also take the DB level higher up and make better sound!
      But this box he made is trash, he doesn't have the right air for those midrange which he is letting play bass also the finish is so poor, cracks are visible and the jbl fake membranes are designede for a surtain bass and not for looks only, what is the resonans of the units and the box?
      This is a ok cool projekt, but it looks like shit and All common sense and knowledge about the science behind building the correct box and using correct filters are long gone....

    • @mansuriaftab4850
      @mansuriaftab4850 3 ปีที่แล้ว +1

      I agreed with u

    • @highhat5229
      @highhat5229 3 ปีที่แล้ว

      The battery would last like 5 minutes at max

    • @mansuriaftab4850
      @mansuriaftab4850 3 ปีที่แล้ว

      @@highhat5229 😂😂right

  • @disp9803
    @disp9803 3 ปีที่แล้ว +14

    Хороший контент молодец парень👍
    Я подписался)

    • @orycleX
      @orycleX 3 ปีที่แล้ว +1

      Это вопрос автору, ты русский язык знаешь?

    • @qu1nside
      @qu1nside 3 ปีที่แล้ว

      Прекрасный просто,не закрыв пищалки в корпус))

    • @user-jw4fk7ub2w
      @user-jw4fk7ub2w 3 ปีที่แล้ว

      @@qu1nside да не говори аж пищалка дефрмируется

  • @Haubi1708
    @Haubi1708 3 ปีที่แล้ว +1

    Masterpiece

  • @mahir6239
    @mahir6239 2 ปีที่แล้ว +1

    Bro play bass I love u and see the magic

  • @uncledope77
    @uncledope77 3 ปีที่แล้ว +6

    Good job but those tweeters are gonna pop. Because they are sharing air space with the speakers. And they are not designed for flexin.

    • @hvccreation
      @hvccreation  3 ปีที่แล้ว +1

      Thx Bro, i'll rebuild it in next video

    • @uncledope77
      @uncledope77 3 ปีที่แล้ว

      @@hvccreation Just cover them from the back with a pvc pipe cap. Seal it with some glue or hot melt glue. And it should keep that air separate. 👍🏾

    • @harithagotbeat1759
      @harithagotbeat1759 3 ปีที่แล้ว +2

      Uncle Willie
      AGREE

  • @dudethatuploadsstuff4247
    @dudethatuploadsstuff4247 3 ปีที่แล้ว +12

    I want to collect enough JBLs to do this, whos w me😂
    Edit: that must sound amazing tho, nice work

    • @hvccreation
      @hvccreation  3 ปีที่แล้ว +2

      thx bro

    • @MultiWirth
      @MultiWirth 3 ปีที่แล้ว +3

      Just buy some decent full range drivers for much cheaper and probably better lol

    • @dudethatuploadsstuff4247
      @dudethatuploadsstuff4247 3 ปีที่แล้ว

      @@MultiWirth oh beleive me, ive had alot of ideas. But i really like the way JBL sounds plus i want the motherboard for LFM. Im going for simplicity but the usage of bigger amps on the inside would be a big plus.

    • @MultiWirth
      @MultiWirth 3 ปีที่แล้ว +5

      @@dudethatuploadsstuff4247 JBL speakers have proper enclousure design calculated by the parameters of the drivers and they have a DSP which is a digital signal processing unit so the speaker itself will have more bass and often less treble to compensate the small enclosure and there´s no chance you can make this at home.
      So with other words, even if you use JBL parts, it will never sound like a JBL box.
      Building a speaker enclosure isn´t just putting a few parts together, it has to be the right size based on what is best for the individual driver, also called Thiele Small Parameter.
      So before ripping apart some expensive stuff, think twice about this so you don´t get disappointed in the end.

    • @dudethatuploadsstuff4247
      @dudethatuploadsstuff4247 3 ปีที่แล้ว

      @@MultiWirth Jesus christ its a DIY chill out.

  • @beatbytheworld.2171
    @beatbytheworld.2171 2 ปีที่แล้ว +1

    Nice video but it needs a free EMONEYTREE beat playing

  • @rannel11
    @rannel11 2 ปีที่แล้ว +1

    Se é loco, muito show

  • @bassbosted5661
    @bassbosted5661 3 ปีที่แล้ว +61

    14:45 rip tweeter

    • @hvccreation
      @hvccreation  3 ปีที่แล้ว +8

      Tks Bro, i saw and fixed it, but it ... @@

    • @bassbosted5661
      @bassbosted5661 3 ปีที่แล้ว

      @Koen 145 xd i didnt see this mistake thanks becsuse this is autocorecta