Galaxy S24 Ultra Spigen GLASTR EZ FIT Screen Protector - Drop & Scratch TESTS
ฝัง
- เผยแพร่เมื่อ 10 ก.พ. 2024
- 🚨Product links below🚨
1. Spigen Glastr EZ Fit - amzn.to/48YsP7l
Thanks for watching!
Follow me on
Instagram - / hightechcheck
Twitter - / hightechcheck2
Facebook - / highttechcheck
Subscribe - / hightechcheck
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the Amazon product links, I’ll receive a small commission. This help support the channel and allows me to continue to make quality content!
@SpigenWorld #galaxys24ultra #galaxys24series #galaxys24 #galaxys24plus #samsunggalaxys24ultra #samsunggalaxys24 #bestandworst - วิทยาศาสตร์และเทคโนโลยี
This is my go to as I prefer the camera to be covered.
Getting ready to install this screen protector on my S24 ultra today ❗ Thanks for the video 🫡
Nice one 👍
I've been using EZ fit for a while; The gap is wider than similar clear glass of that price, it's there even with my thickest case. The glass's edge also drop exactly or just slightly over where the bezel and screen met, when catches light it became more apparent. I don't even use phone for media consumption and found it distracting..or maybe it's just me?
👋👋Pro tip: Install it in a steamy bathroom. That will get rid of all, and I mean all, dust particles. You will get bubbles, a lot, but then you can play with the thing they give you and get the bubbles out. Better to have bubbles than dust.
Wow, that is very deep testing! Thanks for the video, really scientific approach. Would be great to know the scratch numbers for Gorilla Glass Victus 2 and Corning Gorilla Armor. Are these numbers higher than the reviewed protectors?
Check the s24u review from channel Jerry rig everything, he tests the glass for scratches.
What do you think the best between this and UltraGlass? Considering price...
I'm soooo happy , this S-series like this Ultra i bought & waiting to receive it next week , went with FLAT screen ..cases & Glass protectors sits & stays really nice & flat on it ,without any lift up , i had a meager Problems before with most cheap or expensive glass protectors would left up after month or so with hand squeeze & pressure of cases , at this time U can get any Glass protectors for this as sits nice
What about the side panels
hello, how does the front camera look like with the screen protector ? thanks
Agree 💯% hello
it works with nubia z60?
Redo finger print reader and will be good to go
WTF....so many screen protectors for this phone doesn't cover the whole screen.
Even with a case on, you can clearly see a gap on all sides.
Do you know of any that actually cover the whole screen?
Why didn't it get 5/5 in "installation" and "case friendliness"?
Is it compatible for S23 Ultra too? I don't like the Platinum Tray 2.0 thing of Spigen, i want this Ez.Fit version. Its easy to install.
NO! The Galaxy S24 Ultra has a FLAT display. The 23U has a CURVED display. The EZ-FIT only works with the FLAT DISPLAY.
Had to remove this. Makes fingerprint reader too inconsistent even after redoing them.
I come to confirm that all the reports about the loss in the fingerprint sensor’s sensitivity is true. However, with a bit more pressure, the phone detects your fingerprint perfectly fine.
Is it same with this screen protector.. I am planning to get one.
It is recommended to redo the fingerprint registry steps after applying any protector.
@Eduardo1007 i tried it many times. It worked for few times i pressed it and then again went back to same thing. And i have to press hard than usual to unlock the phone
Same issue here. Could get to 60 somewhat percent .. and then nothing.
Turned on sensitivity in the settings as well.
Guess it's back to passcode!
the only problem is, the new screen on the s24 ultra uses a tecnology to do less reflection, with a glass screen protector you lose this feature...
i'm currently using this for my S24 Ultra, everything is good and fit perfectly with the spigen case, however the fingerprint sensor is having a hard time recognizing my thumb, i already re-register my print but no luck so far, i already giving up and using the face unlock instead
same issue but i am using another tempered glass
Try adding fingerprint twice. Like save it twice.
Which tempered glass you using @cricitcalmass500 ? Any suggestions as I'm having the same problem
@@shaktisharma8061 I bought it offline, forgot the brand now, I registered the fingerprints 3 times, now it's better but still gives problems.
There is a setting to turn up touch sensitivity. Turn it on and then re-add your fingerprints. Should work better hopefully
Sent mine back, didnt work at all
czytnik linii papilarnych działa idealnie w s24 ultra po montażu tego szkła ?
Yes
I lile the spiegen cause it covers the camera I want the torras it would be the best of the best easy install 8 foot drop etc but has that dumb cam cutout
cam cut out adhesive is weak there so likely cause air gap and lift. hence cut out is better. i wouldn't get spigen I would go for amfilm
@@RameshRam-tr4zn got torras love it hate the cut out it's all I see lol
scratches at a level 6 with deeper groves at a level 7
A timeless classic
We need the best anti glare screen protector
My phone is not usable with fingerprint sensor and this glass... No chance. I'm changing my fingerprints daily. Few hours later they don't work anymore. If you have dry hands this thing will not work for you
I also Say for the first time on Spigen this product doesnt fit at all to my s24 i place it on my Phone and Glass was 3mm off the Phone