Great video. I have a 522xi and it has issues lifting the 2 stage blower. Tested the cylinder and it's good. On a cold start it will lift it once. Each time after it lifts it less. Do know if they have an Allen screw like the 520h?
Dennis Mayes like for drive? No this applies only to lifting it’s a relief for the hydraulic lift ram, most problems with forward lever are from worn bushings, if you lift up your seat you’ll see the actuator for the forward reverse it may need to be adjusted or bushing replaced. Hope this helps out, you can also replace the foot brake pedal for a forward reversepedal instead of the lever
Wheelhorse Forever. Nothing ever beat them.
Good video, old but helpful. Thanks.
Great video. I have a 522xi and it has issues lifting the 2 stage blower. Tested the cylinder and it's good. On a cold start it will lift it once. Each time after it lifts it less. Do know if they have an Allen screw like the 520h?
Andrew Brooks if it has a hydraulic lift it’ll have a relief somewhere
Do you have the spring assist on the lift? If not, it might require more hydraulic power.
I just got a 520h where did u get the tires. N hitch for the tiller.... thanks for the video I needed that for my plow.
Chris Penny simple tire and the hitch my father had
What size are those tires?
HELP, will adjusting that valve help with the hydraulic forward lever? Dennis
Dennis Mayes like for drive? No this applies only to lifting it’s a relief for the hydraulic lift ram, most problems with forward lever are from worn bushings, if you lift up your seat you’ll see the actuator for the forward reverse it may need to be adjusted or bushing replaced. Hope this helps out, you can also replace the foot brake pedal for a forward reversepedal instead of the lever