System Sensor P2WH-LF Low-Frequency Sounder and the Simplex 2901-9838 Horn both sound good together! I like the sounds of both of those devices because they sound beautiful! They sound pretty, too! 😍 🤩
The Simplex 2901-9838 with the 4903-9101 light plate and the System Sensor SpectrAlert Advance Low Frequency Sounder sound an octave apart which is why these devices were requested
at my local golden corral,they have the BG12 that is in this vid but is rebranded by silent knight,and the have plain old Spectr alert advances wall mounts as the alarms,all red pulls and alarms.
Hey I Have a Question for The Type of Fire alarm my School Has Cuz it Looks like the White Ones at 2:15 But when you pull The Thing Instead of a beeping Sound it Says “May I Have your Attention Please, May I Have your Attention Please, There’s has been a Emergency Reported in the Building Do not use the Elevators.”
And also, quick question. Does the Cpg mmps have a stopper like thing in it as well? I noticed it has vents and strange components inside that I've never seen in a pull station before...
Hello Grant, I plan on building some custom 2 zone conventional panels that actually work like an actual panel, but for a fraction of the cost. They will be board only, no enclosures. There will be 12v in terminals for systems power, aux power terminals, ZN1 and ZN2 terminals, NAC 1 (for horns) terminals, and NAC 2 (for strobes) terminals, remote reset terminals (for a key switch for example), remote alarm terminals, (to show alarm status on an LED, and remote silence terminals. It will also feature a silence button and silence light, zone normal and zone alarm lights, a reset button, a drill or test button, and AC power light. You will have to provide the 12v power supply though. I always like the MG Power ones with the screw terminals from ADI. They are over in the power department at ADI. I use those for tornado alarms (yes, I install tornado alarms, in my school). You can use anything normally open for the zones (pull stations, system sensor i3's, etc.) And in you use horn strobes, you need to use 4 wire ones, and connect the horn to NAC 1 (that is the one that cuts the power when you press silence. NAC 2 Keeps going so the strobes keep flashing until you reset) and the strobes connect to NAC 2. And I am charging only $65 each for these boards - pretty much my cost to make one. I have lots of experience in making things, with or without electronics, and it won't just be a hack, it will be very well made. And If you want more zones, I can add more zones for an extra cost. I can make the system 12v or 24v depending on how you want it. Even if you aren't interested in buying a panel, please let me know your thoughts on it! Thanks for reading! Zachary
Yeah, I agree. I was only offering it to you as something to just do testing with. It would be a very long process to get it on the market, and sold at places like ADI and Tri-Ed. So it would be a prototype only, and just something I was interested in sending you. No obligations though :).
I love the Simplex Alarm the most because Simplex fire alarms are my favorite and dont forget to subscribe to s.e.r safety and the notification bell to notify him
To the agent one I never saw that in the building why no to those been at the sewing fry so I was wondering I want to Florida in the pool station and when they said put I made the noise like you have OK thanks for this message is for me 560 fire safety along with for firWhen are they do not use all they’re doing a firee
Tbh it like the 490? And another one with just the horn The no strobe was in March and with strobe was on code 3 If you confused it was in 10UD system test 10
I hope you Made requested devices system' test again this year via google forms, because I didn't have any chance to fill that form 😭😭😭 Edit: I'm not forcing you, but I was just wishing :D
The CPG pull station will be an ideal thing to have at schools, preventing false alarms 👍🏻
Could a dual action pull station under a stopper (such as one by STI) be considered a triple action pull station?
@@Neptunesalad12 Well, yes!
@@Gachricknow that could be useful in a school
@PatrickEU160 what about the plastic "door" on the pull station
@@Neptunesalad12 they wont know
I like how the System Sensor Low-Frequency Sounder and the Simplex 2901-9838 sound together. This is by far one of my favorite system tests.
I agree!
Unless u play the video in 2 speed. Then yes
Yes, you finally put my mechanical horns on that board. Yay.
System Sensor P2WH-LF Low-Frequency Sounder and the Simplex 2901-9838 Horn both sound good together! I like the sounds of both of those devices because they sound beautiful! They sound pretty, too! 😍 🤩
I remember when this was uploaded.. and it feels like I subbed to you yesterday
The band of fire alarms has returned.
Haha
I liked the tester for the fire pulse station
The Simplex 2901-9838 with the 4903-9101 light plate and the System Sensor SpectrAlert Advance Low Frequency Sounder sound an octave apart which is why these devices were requested
It's so striking to hear your voice change between your old videos and new ones haha
Yeah! Whats with the different voices? Are the old ones still you?
2:03 sick beat!
Now that is a cool duct detector key switch. It’s got its own horn/strobe built into it.
@0:46
I actually have that pull station in my school, and it's connected to SpectrAlert Classics and Advances. I also see it in a lot of places.
Same
I have that pull station but it’s push and pull
It’s my birthday today and this was really a present
I like the medical alert, pretty nice and never seen it light up😮❤
I voted for the simplex alarm :) I have been waiting for this system test!! So glad it is here!!
Great video and great job on setting up the system
at my local golden corral,they have the BG12 that is in this vid but is rebranded by silent knight,and the have plain old Spectr alert advances wall mounts as the alarms,all red pulls and alarms.
This one was really really cool man!!!!!!!!! Absolutely loved it!!
Thanks for the requests!! :)
Nice video! When is the next system test?
3:33 did you use the same key for the annunciator
I like your videos that’s your SER
safety
That 2901 Sounds mighty Epic
This is the best video ever I LOVE this video
Cool!❤❤
I saw this and I was likes yes yesss YASSSSSSSS FINALLY! Awesome vid as always
:D Thanks!
@@SERSafety good video
I like the system sensor low frequency sounder and the bg12 the best
Can you do the other specter alert strobe?? I love that one
when are you gonna do another request system test like this? also you should do it with the addressable voice evac system
Can you show us what the back of all those fire alarm boards looks like?
Hey I Have a Question for The Type of Fire alarm my School Has Cuz it Looks like the White Ones at 2:15 But when you pull The Thing Instead of a beeping Sound it Says “May I Have your Attention Please, May I Have your Attention Please, There’s has been a Emergency Reported in the Building Do not use the Elevators.”
And also, quick question. Does the Cpg mmps have a stopper like thing in it as well? I noticed it has vents and strange components inside that I've never seen in a pull station before...
I love the red one on the right
Hello Grant,
I plan on building some custom 2 zone conventional panels that actually work like an actual panel, but for a fraction of the cost. They will be board only, no enclosures. There will be 12v in terminals for systems power, aux power terminals, ZN1 and ZN2 terminals, NAC 1 (for horns) terminals, and NAC 2 (for strobes) terminals, remote reset terminals (for a key switch for example), remote alarm terminals, (to show alarm status on an LED, and remote silence terminals. It will also feature a silence button and silence light, zone normal and zone alarm lights, a reset button, a drill or test button, and AC power light. You will have to provide the 12v power supply though. I always like the MG Power ones with the screw terminals from ADI. They are over in the power department at ADI. I use those for tornado alarms (yes, I install tornado alarms, in my school). You can use anything normally open for the zones (pull stations, system sensor i3's, etc.) And in you use horn strobes, you need to use 4 wire ones, and connect the horn to NAC 1 (that is the one that cuts the power when you press silence. NAC 2 Keeps going so the strobes keep flashing until you reset) and the strobes connect to NAC 2. And I am charging only $65 each for these boards - pretty much my cost to make one. I have lots of experience in making things, with or without electronics, and it won't just be a hack, it will be very well made. And If you want more zones, I can add more zones for an extra cost. I can make the system 12v or 24v depending on how you want it. Even if you aren't interested in buying a panel, please let me know your thoughts on it!
Thanks for reading!
Zachary
Nice idea, but I would not recommend selling electronics on the internet that are not UL listed. Thanks for the offer though!
Yeah, I agree. I was only offering it to you as something to just do testing with. It would be a very long process to get it on the market, and sold at places like ADI and Tri-Ed. So it would be a prototype only, and just something I was interested in sending you. No obligations though :).
uploaded on my birthday!!
Nice video I subscribed
I agree with you
I agree with you too
Nice Video and happy late 5 year anniversary of this video from October 24th 2022 this comment is from November 23rd 2022
This is my favorite video
i love to get one of those low freqency sounders and simplex
Awesome this video on my life I subscribed
I love the Simplex Alarm the most because Simplex fire alarms are my favorite and dont forget to subscribe to s.e.r safety and the notification bell to notify him
Thx for putting that on the LCD!
Safeman4202 😂I saw that aswell
Safeman4202 g
To the agent one I never saw that in the building why no to those been at the sewing fry so I was wondering I want to Florida in the pool station and when they said put I made the noise like you have OK thanks for this message is for me 560 fire safety along with for firWhen are they do not use all they’re doing a firee
Safeman4202 fdu
Safeman4202 no u
I love the Nest home protect
Grant EXELENT job and great system!!!!! #firepanelsareawesome
Thank you!! :)
S.E.R. Safety do you have hangouts I reeeeeéeeeeeeeeeeeeeeeeeally want to talk with ya. And we got stuff in common.
The simplex strobe plate is awesome! I love it 😍❤️💙
I like the old Simplex fire alarms because my school has one.
Ghost King i wish mine too
What's the pullstation at 2:53?
Does the key switch have verification turned on?
When is the start of the test, it sounded like music
Great video!
im LOVE YOUR VIDEOS
Great video 😀👍👍
What is the annunciator's model number?
How did you do Filtered DC on a Fire-Lite panel that puts out FWR
The MS-10UD always puts out Filtered
The ADT version does put out filtered dc
All Adressable Fire Alarm Systems (Excluding Simplex) output FWR unless if booster panels are used to make the system output Filtered DC
Can you test the agant relese please in the next system test?
Tbh it like the 490? And another one with just the horn
The no strobe was in March and with strobe was on code 3
If you confused it was in 10UD system test 10
Do another request system test with the voice evacuation system
Is that an infinity series key switch? It looks sexy.
I ❤️ the agent kind low frequency sounder
5:06 I saw one at the Newark Ohio Kroger Marketplace. If I get a drone, I'll try to get a picture of the duct detector for you
COOL!
I request you to do a Sinplex truealert system with a auhhh on March time with Fire-lite BG-L-LX
I hate fire alarms but I can’t stop watching
1:05 what is that fire alarm called?
System Sensor P2W-LF
thanks
Awesome!!
Sup
And right now it’s storming where I am right now, so yeah, I’m done the earliest one up
WHEN ARE YOU GOING TO DO THAT DARN RESET SWITCH?
Yo,Verry zeroos
Why is the medical alert in every video now?
What does SER mean??
The pull stations in my school Are pulled in 2 different ways which is Pull down or Break glass IrishEST call points
love it so much
For the LCD can you put "the f.a.c.p" you don't have to though
SER SAFETY you could put the simplex horn on continuous
0:57, I see that pull station a lot now
Yeah, last year at my elementary school (I’m 10) there’s those pull stations and there in the middle school!
3:07 on .0x clink
Why is the horn advance says "AGENT"?!!
You should test the kidde cosm iba
In indiana bg-12s are the only pull station you see around here
Does your Unimode 10 have filtered dc nacs?
Yes.
I liked the simplex horn next video can you put it in code 3 ? that would be nice
Ukamamj,a
I hate fire drills at my school, I don’t know why I’m watching this.
You need them if there’s a fire
Do more system sensor fire alarms
Can the Unimode 10D do coding options?
Yes, it was coding the Simplex horn in the video.
Cool cool cool
😍 😍
1:59 pulls fire alarm
Yes every building has a lot of fire installed
So I aw on eBay a seller named s.e.r. safety store, I don’t think it is u
Do to worry, it is. I bought a tented mini horn from him
That Fire Alarm Control Panel
I hope you Made requested devices system' test again this year via google forms, because I didn't have any chance to fill that form 😭😭😭
Edit: I'm not forcing you, but I was just wishing :D
I like the fire alarm system
at 0:58 that is the fire pulling system at my school and at 1:22 that is the fire alarm
3:32 reset pull station
I care about fire alarm system board so I’m not surprised when I wake up
AWESOME
Please put the fire lite bagged 10
❤Ryan phone cases, red phone cases, red phone cases
I love system senator specter alert advance
i love it 🖤💛🧡❤️💜💚💙😍🥰😘
I thought BG 12s were very common
05:05 Duck detector is shown
I like fire alarms