BMW BRAKE & 4x4 warning lights reset
ฝัง
- เผยแพร่เมื่อ 15 ก.ย. 2024
- In this video I have a 2007 BMW X3. The BRAKE & 4x4 warning lights were stuck on, and i couldn't figure out why. Turns out this can happen when you replace a battery, or simply unhook the battery terminals.
NOTE! this is not the same fix for the BRAKE - 4x4 - ABS warning light issue.
Appreciate what you just saw?
Buy me a coffee if you’d like.
OR A BEER 😎🍺
Cash app: $Murk55
Venmo/PayPal: Murk55
This method should work on any BMW, but specifically for:
2004 BMW X3 X5
2005 BMW X3 X5
2006 BMW X3 X5
2007 BMW X3 X5
2008 BMW X3 X5
2009 BMW X3 X5
2010 BMW X3 X5
Omg you’re a lifesaver!!! Don’t know you but, I owe you a beer!!
This even worked for the airbag and other Brake light that were also on, thanks
Thank you this worked for my 4x4 Light :)
Thank you worked for my 2007 bmw 530xi
Gracias por tu video pero no funcionó con migo tengo
2009 BMW 2009 X3 I Please do You have any idea what we can do
Yo thank you so much I was scared it was broken
Thank you. This was very. very helpful.
This also works if just the 4x4 light is on.
I have a 2009 X5 and 4x4! Light went on - I did the turning of the steering wheel, but it didn’t work for me! :/ It is Wed. AUGUST 21, 2024 / 5pm
Hi, how can i reset airbag light?
This worked for me, thanks!
this helped my gf thanks 🙏🏽
Thanks work for me
Awesome to have come across this video.
Thank You ! how do i get my Headlight inop dash light out, all my lights work
If you're 110% sure that all bulbs are working... (including the rear hard to get one) then you might have to get the FRM Footwell Module Reset. Unless you have the computer to do this, you'll need a tech. Never had experience with that though. Its always been either bad bulb, or bulb connector for me. good luck.
@@murkoutdoors Thanks, the rear "hard to get one" is the lower/center brake lights ?
Very Very helpful, thank you for sharing !
Was shitting my pants unplugged the battery and got both lights first video I seen and it took it right away big help lmao
I did it a couple of times and goes away and them keep coming back
Thank you for your usefully video it's work on my x3 e83 thank you very much you are life saver
Hello buddy! I did that but my light on still! Do you know i need to do ? Thanks buddy
Try removing the positive terminal of the battery for a few minutes. Then repeat the steps.
If it still does not fix the light, then you have a different issue, outside my knowledge. Good luck.
Worked so far for me thanks! 🥂
Thank you so much
I did it and all is working fine now❤🎉🎉🎉
Very helpful so far and thanks!
Your 4x4 actuator is failing...
Muy útil la verdad muchas gracias por su video❤
I did that and mine goes away and came back as soon as I moved and hit the brake
If it only comes back when you hit the brake, then this is likely your transfer case actuator.
Well beyond my expertise and knowledge though. Sorry the fix I provided did not help you. Good luck.
Not work on my x5 e53
I hope it works on my 08 528
If the signal don’t go what can be master?
Lmk if you find out my 4x4 didn’t go away
If after multiple attempts it doesn't fix the issue, then its likely the Transfer Case Motor Gear is going/gone bad. Here is a link to the part, and you can find videos of replacing it on YT. amzn.to/48qSBRL
Thanks Bro!
Great tip
Damn 😮 you are the master
Thanks! That worked!
Thank you!
Amazing, thank you!
THANKS!
Looks like I have "the different issue."" Can you help??
This didn’t work on mine
😢 It didn't work
This doesn't work for me idk but I still got the 4x4 light on
HI This only works to clear the two lights together, Brake and 4x4. For just the brake light, you can try this: Reset Your Brake Warning Light
Insert the key (or key fob) in the ignition.
Move the key to position 2, but don't start the ignition.
Open the driver's door and wait for approximately 10 seconds.
After completing the above three steps, the brake pad lights should reset!
Did nothing for me!
I have same issue but this did not fix it.
After trying this, if it does not work. You can remove the positive terminal on the battery. Then put the battery terminal back on and repeat steps. If it still does not fix, you need to get a code reader to see what the fault code is. One like this for example: amzn.to/3M1Ndfb
did not fix the problem
Thank you, it helped me a lot.
I didn't work on mine
If after multiple attempts it doesn't fix the issue, then its likely the Transfer Case Motor Gear is going/gone bad. Here is a link to the part, and you can find videos of replacing it on YT. amzn.to/48qSBRL
@@murkoutdoors i had the transfer case opened and the parts are new.
Sorry i need to clarify my abs and break light and 4x4 is on. Its stuck driving fine in 4 wheel drive.
@@cynthiasarah4286 Understood. Apologies, but that's beyond my expertise given those circumstances. I'm sorry i can't help. Take care, be well.