i dunno man... arent they a bit too close to each other? i dont think people will be able to tell which direction you intend to turn to from a distance
I've always admire people with such natural mechanical and electrical skills....problem solving on the go. Amazing! I hope I can get this done this easy on my bike when I have it. 👀
this is too funny, i just watched your exhaust video with the header installation and was like wow that really looks like Michigan idk why. Now you say it and I feel like a genius
Did you take the plug off the old blinkers and solder the plastic end to the new one? Is that what you were showing at the end, with the different wiring colors? Thanks.
Yes I cut the stock connectors off and soldered them so I got a good connection that I can easily remove, I will never go back to the stock blinkers so the rest of the blinker hardware is just throw away.
@@EvilNeil187 yeah so basically once reusing and soldering that blue original connector the blinkers are plug and play themselves where does the relay go
Very cool, i might put a pair on the back of my 2015 Rebel cmx250 as those OEM lights take up a lot of valuable bike-estate. Btw, tuck the stock ones away, just in case you do need them again.
I just bought the wraps from your site. Do the same wraps work for the headlight? or do you need to buy a different set of wraps to cover the silver around the headlight? Love your stuff
Hi man! Nice work with the rebel. Also great solution for the fork. :) I am going to do the same on mine. Where did you get the black front light cover? Or is it somehow wrapped / painted?
I installed the blinkers but they stopped working after few minutes as well as the speedometer. Only the headlight still working. Did it happen to you? Is it the fews? Is it because I didnt put a relay yet ? Thanks for your help
@@EvilNeil187 I did ad the relay the blinkers are working. Now the running lights are not. And now I can't remember when they stop working before or after the relay😣
Oh man looking SLICK as snail tracks on a greased pan!! Might have to see if I can get the dimensions have have you do a set of wraps for my V Star!! Jelly =D
Did you watch the video? 7:22 covers the wires from the stock connector and what they are... Depending on what blinker you install wire colors on that end could be different or only 2 wire if there are no running lights.
hey man can you help me out? i got the same blinker setup as you and i installed them and they worked completely fine, I used the magnet to go through the different settings in the lights and they just flashed and turned off, now neither the front blinkers or running lights turn on, has this happened to you and have you tried going through the different settings on the lights?
EN187 awesome! Good to know I’m not the only one! Thanks for your help! Let me know when you get your new pair if they fixed it or not I’ll let you know for mine also!
I emailed today to see if there was an update, my duos working fine tho, Been using their blinkers for years never any issues, im sure they will get it straightened out soon.
@@EvilNeil187 i spoke with them yesterday and they said that they are currently updating a few pairs and sending them out to people, probably you and I honestly lol.
its outdoor automotive grade vinyl with adhesive back, you just wrap them around, I have them forsale on my site www.en187.com about 10-15mins to install, just remove the stock blinkers, wrap them, then put the blinkers back on.
I have not yet, waiting untill I install the rear blinkers, but the LED relay is located in the very front of the bike under the tank on the right side. You can hear it clicking when the blinkers are on.
i dunno man... arent they a bit too close to each other? i dont think people will be able to tell which direction you intend to turn to from a distance
I thought it was fine, but I did end up moving them anyway to another location
I agree the forks also screen the signals . I would just relocate them too the outside of the forks.
I've always admire people with such natural mechanical and electrical skills....problem solving on the go. Amazing! I hope I can get this done this easy on my bike when I have it. 👀
Its real easy! Just watch the videos here and follow along! :)
this is too funny, i just watched your exhaust video with the header installation and was like wow that really looks like Michigan idk why. Now you say it and I feel like a genius
Glad you did a video I didn't know what you wrapped looks clean 👍
Turned out great! Put some drag bars on today! Looks killer!
Did you take the plug off the old blinkers and solder the plastic end to the new one? Is that what you were showing at the end, with the different wiring colors? Thanks.
Yes I cut the stock connectors off and soldered them so I got a good connection that I can easily remove, I will never go back to the stock blinkers so the rest of the blinker hardware is just throw away.
@@EvilNeil187 Thanks so much. That’s what I thought, but I def wanted to ask before I went blindly snipping. 😂
@@EvilNeil187 yeah so basically once reusing and soldering that blue original connector the blinkers are plug and play themselves where does the relay go
Thinking of buying a rebel and loving your vids :)
worth it you will love it!
I got one as my first bike a few weeks ago and I love it!!
looks great, I'm thinking I'll do the same and wrap the fork fo sho, for the front signals, maybe turn them 180 deg so they face outwards?
I actually moved them again there is a different video, I wanted super low key they are super bright tho so still very visible!
Looks really good. Keen to see how this bike is going to turn out.
Thanks! I really like how it looks compared to the stock dildo blinkers hahahha
Looks real clean 👌
Very cool, i might put a pair on the back of my 2015 Rebel cmx250 as those OEM lights take up a lot of valuable bike-estate. Btw, tuck the stock ones away, just in case you do need them again.
Looks good mate love the wrap
really cleaned up front up!
I just bought the wraps from your site. Do the same wraps work for the headlight? or do you need to buy a different set of wraps to cover the silver around the headlight?
Love your stuff
no I had that powder coated.
Will the wraps fit a 2020 rebel? Trying to make sure before I buy from you site. Thanks.
Hi man! Nice work with the rebel. Also great solution for the fork. :) I am going to do the same on mine. Where did you get the black front light cover? Or is it somehow wrapped / painted?
Its wrapped, I sell the wraps on my website, you can order from www.en187.com
@@EvilNeil187 Thanks, I am located in EU so I will get some here. But thanks for inspiration! :)
I wish I was as handy as you. ..haha you make it look so easy
its really not very hard, you can do it!
Not a rebel guy but the mods look good keep it up 👍
more to come!
Nice, looking forward to seeing the rear blinker installation.
Gunna try and have it up tomorrow! Stay tuned vid is all shot, just gotta edit!
You don’t have to disconnect the battery before swapping out the signals?
You could if you wanted to be careful not to blow a fuse, just don't let the wires touch..
Sick video man appreciate it
Thanks man!
can you demonstrate how to replace rear light and blinkers with a better aftermarket one?
I replaced mine in my fender delete video.
@@EvilNeil187 but how to remove the ugly tail light and keep the fender
Genius idea with the wraps! What are those dimensions of you don't mind me asking?
Nevermind, I didn't see your link at first. Ordered! Can't wait to get them in the mail! Thanks!
Nice work mate! 😀
Thanks Tony!
I installed the blinkers but they stopped working after few minutes as well as the speedometer. Only the headlight still working. Did it happen to you? Is it the fews? Is it because I didnt put a relay yet ? Thanks for your help
I would check your fuses
I'm thinking of doing something like this for my Indian scout bobber
Def check out them X-arcs from High Tech Speed, they look killer and are super bright.
@@EvilNeil187 for sure man.
Blue and white, what color wires are connected?
Like the video. Maybe u can help me I have 250 rebel I put my led turn signal on with relay now I have no running lights. But blinkers do work.
you probably need to add an LED relay
@@EvilNeil187 I did ad the relay the blinkers are working. Now the running lights are not. And now I can't remember when they stop working before or after the relay😣
Oh man looking SLICK as snail tracks on a greased pan!! Might have to see if I can get the dimensions have have you do a set of wraps for my V Star!! Jelly =D
Yeah I really like how it turned out! looks good!
Which wires go where? I think that is a major point you skipped over.
Did you watch the video? 7:22 covers the wires from the stock connector and what they are... Depending on what blinker you install wire colors on that end could be different or only 2 wire if there are no running lights.
Do the signals come as a set or are they $110 per signal?
How do I purchase your black fork wraps for my rebel 500?
www.en187.com if you are international see the top of my site for paying via paypal
Do you know what size are the rear spring or suspensions? On the Honda rebel? Planning to swap it to the adjustable ones
I do not, I would look up in the manual or call the dealer,
EN187 alright cool thanks!
when you buy the lights on the site is it one bulb so you bought 4, or 2 together as a package? Thanks
They come in sets of two, so one of just the amber for the front and a set duo for the rears, prices are for a set
It was 4 as a package
hey man can you help me out? i got the same blinker setup as you and i installed them and they worked completely fine, I used the magnet to go through the different settings in the lights and they just flashed and turned off, now neither the front blinkers or running lights turn on, has this happened to you and have you tried going through the different settings on the lights?
Mine did the same, there is an issue with the lights, Contact info@hightechspeed.com to setup a replacement.
EN187 awesome! Good to know I’m not the only one! Thanks for your help! Let me know when you get your new pair if they fixed it or not I’ll let you know for mine also!
I emailed today to see if there was an update, my duos working fine tho, Been using their blinkers for years never any issues, im sure they will get it straightened out soon.
@@EvilNeil187 i spoke with them yesterday and they said that they are currently updating a few pairs and sending them out to people, probably you and I honestly lol.
ahhaha right!
The fork wraps install with adhesive?
its outdoor automotive grade vinyl with adhesive back, you just wrap them around, I have them forsale on my site www.en187.com about 10-15mins to install, just remove the stock blinkers, wrap them, then put the blinkers back on.
What are the dimensions of that rap?...
You can buy them on my site www.en187.com
What are the dimensions of the fork wraps ?
enough to exactly cover the area needed, you can purchase them from my website, www.en187.com
why these companies dont black out those forks is beyond me.
Because not everyone is an edgy boi
Right? Like do it from the get go, everything else is already blacked out pretty much hahaha
hashahah
Do they have the relay on amazon if so you think you can post pic of it in comments please
not sure you would have to look, I have a relay install video with link to the relay I used.
I really like the fork wrap, cops around here would throw a bitch fit about those turn signals though :)
hahaah why too close together?
Yup.
I need those vinyl dimensions! Please
Custom, you can order from my website, www.en187.com
The website sucks ass
If only there were blinkers that could be both big and look cool.
these are small but super bright, put out more light than any other LED blinkers I have ever seen
How did you install the relay?
I have not yet, waiting untill I install the rear blinkers, but the LED relay is located in the very front of the bike under the tank on the right side. You can hear it clicking when the blinkers are on.
DOOOOOOPE sauce! -yamaha_scrub
yeahhhh
Probably not legal. Too close together.
He put them on wrong 😂😂😂😂😂🥶🥶🥶💀 there on the opposite side, there supposed be sticking out like the stock. Very dangerous when we can’t see you
They are exactly how I wanted them, as low profile as possible
EN187 I get it, do you man 😂 ride stay I’m getting a Honda Rebel soon
you gunna love it, great bike
EN187 hopefully
Waste of money on this . Pay for this then you still have to modified.
Eh
Who could see those lights? Looks like a waste of time and money let alone safe.