Brilliant video thank you. Are you associated or work for for FOXESS? I have a question about home assistant, I am unable to connect to it since the firmware update for flux support because FOXESS have removed the LAN connection. Do you have any advise?
Hey, no I’m not associated or work for them but I am a long term user and creator of the fox owners community. If you’re talking about the H series, yes LAN support was removed in the newer firmware. You will need to move to rs485 via a 485 to lan adapter to get it working again. I recommend you join my Facebook group search for foxess solar and battery owners group.
The setups need to match as closely as possible between the inverters and have enough batteries to be able to deliver enough kW at 48amps max so voltage is important here.
@@David_Ashurst so in the UK my K series even when set to 50amps resets to 48amps upon save for the DC battery side, not the AC side. This might be a firmware thing or a regulation for UK connections I'm still confirming.
@@David_Ashurst also worth noting that this limit depends on the batteries connected as some of the new BMS's such as the EP batteries can boost to 60amps for brief periods.
Hi, I currently have the Fox H1 6.0kW Hybrid Inverter G2. With 2 arrays and battery storage on the house. I want get 4x pannels on the garage with an inverter in there but with no extra battery storage. Max 2kw .. Can I use a different fox inverter and the solar generated charge the battery on the house? Do they need connecting or a ct clamp needed. Bit of a pain to run a cable from garage to exsisting/meter Cheers.
If you want to add just 4 panels I'd buy a string inverter like this as no CT will be needed and it's a simple install theecosupermarket.co.uk/product-category/solar-inverters/fox-ess-solar-inverters/fox-single-mppt/
Thanks for the explainer 👍
thanks for the tutorial
Brilliant video thank you. Are you associated or work for for FOXESS? I have a question about home assistant, I am unable to connect to it since the firmware update for flux support because FOXESS have removed the LAN connection. Do you have any advise?
Hey, no I’m not associated or work for them but I am a long term user and creator of the fox owners community. If you’re talking about the H series, yes LAN support was removed in the newer firmware. You will need to move to rs485 via a 485 to lan adapter to get it working again. I recommend you join my Facebook group search for foxess solar and battery owners group.
I take it you have to spread the battery packs evenly to get maximum EPS amps?
The setups need to match as closely as possible between the inverters and have enough batteries to be able to deliver enough kW at 48amps max so voltage is important here.
@@iameccles what max limit does the 48Amps refer to? Is it the battery module max discharge/ charge 50A limit?
@@David_Ashurst so in the UK my K series even when set to 50amps resets to 48amps upon save for the DC battery side, not the AC side. This might be a firmware thing or a regulation for UK connections I'm still confirming.
@@David_Ashurst also worth noting that this limit depends on the batteries connected as some of the new BMS's such as the EP batteries can boost to 60amps for brief periods.
@@iameccles thanks. Ultimately limited by the inverter you choose I guess.
How to connect 2 inverters series T? T10G3 and T15G3. Can I work with one DTSU666? Thank you for your reply.
Hi, I currently have the Fox H1 6.0kW Hybrid Inverter G2. With 2 arrays and battery storage on the house.
I want get 4x pannels on the garage with an inverter in there but with no extra battery storage. Max 2kw .. Can I use a different fox inverter and the solar generated charge the battery on the house? Do they need connecting or a ct clamp needed.
Bit of a pain to run a cable from garage to exsisting/meter
Cheers.
If you want to add just 4 panels I'd buy a string inverter like this as no CT will be needed and it's a simple install theecosupermarket.co.uk/product-category/solar-inverters/fox-ess-solar-inverters/fox-single-mppt/
Is Fox h1 6kw can be cahrge the battery using on generator power on night?
correct, subject to battery setup is also a possible limitation if you only have a small battery setup.
H3 also has these dipswitches but no setting like that, will that become available?
H3 depending on firmware is automatically assigned or configured using the cloud portal.
Hi, great vid, I have a question regarding the fox ess install , do you have an email adress?
Hey, I offering consulting which can be purchased here www.buymeacoffee.com/williamjeccles/e/100139