This really is fantastic coax cable. I paired the UltraFlex 7 cable with the DX Commander and the Chameleon EmComm2. Both work great. The DX Commander with this coax has a very low noise floor, most times around nothing to S2 on 20 meters. Thanks for the video!
M&P is very good cable/ coax. I have been using it for years. The connectors are water proof when installed correctly. They make the cable with more strands so its flexible and provides better shielding. The airflex is very light if you are backpacking in.
We all use coax. However, the fact is that compared to open-wire balanced feed lines, on HF coax is a convenience, but with compromise (signal attenuation).
Here's a question for you. Is it possible to monitor on one radio several reflectors (fusion and/or dstar) at the same time. I am guessing that it's not possible since you have to be connected to a reflector to hear it....but i'm not sure...I've been a ham (general) since the 1970's, but am just getting into the digital world.
i have a large roll of UF7, and finding the UHf connectors in bulk, is diddifcult. if anyone has any idea , please let me know, becuase i can confirm the typical standard rgu modifiers do not work, the cable diamter is very specific to its own manufacture.. the step down collets do not fit.
Have a GMRS question for you . . I’m going to buy one of these but wanted your input on them . . Either the KG-805G (a few bucks cheaper) or the KG-905G . . . what one of these two would you recommend ?
I emailed these guys too many times. I need a co-phase harness . Im using two antennas . these guys dont seem to understand this. Its a Y configuration at 75 ohms for HF 50 ohm systems. RG-59 co-phase harnesess wont work for me because I run the full legal limit.
Might want to consider DXEngineering DXE-11U. 75 ohm and can handle power. Varies with freq. Or Belden 9212. Mil-Spec RG-11U. I imagine by now you've found a solution, but just in case....
One of the best videos I've seen on Messi and palomi cables
Thanks
This really is fantastic coax cable. I paired the UltraFlex 7 cable with the DX Commander and the Chameleon EmComm2. Both work great. The DX Commander with this coax has a very low noise floor, most times around nothing to S2 on 20 meters. Thanks for the video!
M&P is very good cable/ coax. I have been using it for years. The connectors are water proof when installed correctly. They make the cable with more strands so its flexible and provides better shielding. The airflex is very light if you are backpacking in.
We all use coax. However, the fact is that compared to open-wire balanced feed lines, on HF coax is a convenience, but with compromise (signal attenuation).
You know very well what your subscribers wants...Cheers
I got their cable, scissors and connectors. to me their male connectors feel more solid than a typical PL-259 and look slimmer
Here's a question for you. Is it possible to monitor on one radio several reflectors (fusion and/or dstar) at the same time. I am guessing that it's not possible since you have to be connected to a reflector to hear it....but i'm not sure...I've been a ham (general) since the 1970's, but am just getting into the digital world.
I would love to see a side by side comparison.
i have a large roll of UF7, and finding the UHf connectors in bulk, is diddifcult. if anyone has any idea , please let me know, becuase i can confirm the typical standard rgu modifiers do not work, the cable diamter is very specific to its own manufacture.. the step down collets do not fit.
Have a GMRS question for you . . I’m going to buy one of these but wanted your input on them . . Either the KG-805G (a few bucks cheaper) or the KG-905G . . . what one of these two would you recommend ?
Both are good. If you have the cash, get the 905G but if not, the 805G will work just fine for you
Howdy hams!
KInda sounds like Borat. Good demo.
Of coarse he will say his coax is the best it’s his coax.
I emailed these guys too many times. I need a co-phase harness . Im using two antennas . these guys dont seem to understand this. Its a Y configuration at 75 ohms for HF 50 ohm systems. RG-59 co-phase harnesess wont work for me because I run the full legal limit.
Might want to consider DXEngineering DXE-11U. 75 ohm and can handle power. Varies with freq. Or Belden 9212. Mil-Spec RG-11U. I imagine by now you've found a solution, but just in case....