Zirconia vs. PMMA: The Ultimate Guide to Choosing Your All-on-Four Prosthesis
ฝัง
- เผยแพร่เมื่อ 9 พ.ค. 2021
- There are different types of materials that are used to make your All on 4 prosthesis. Dr. Choi goes over all the different options and why its very important you pick the right one.
![ถ้าพี่วุ้นท้อง แป้งจะท้องไปด้วยกัน !!!! [ดูคลิปเต็มหน้าช่อง] #Short | PANG ORNHIRA](http://i.ytimg.com/vi/FeyEnVMwitA/mqdefault.jpg)
Thank you for informing people of this, if you are a dentist out their and have a practice doing this,it just shows that you don’t care about your patients or your own reputation or practice.
My favorite doctor 😋🥰🥰
you nee to go to a BTS concert it seems LOL
Your videos are very informative. Thank you for that! I am considering all on 4 upper and lower at the Malo Clinic in Lisbon. They recommended to me Ceramic for the upper jaw and a titanium/acrylic for the lower jaw. Does this make sense to you? They seem to say that it lowers the chance of breaking. I have also read that zirconia can sound like coffee cups clinking together on upper and lower teeth. I would love to hear your thoughts on mixed prosthesis's.
Wow ,I’m starting see light on horizon, Thanks doc !
You are very welcome
Hi doc,thanks for informations.Does it always have to be 'monolithic zirconia' for all on four over dentures?
Thank you just got my pmma soon will have my zirconia about 5 months.
I've had everything done. Getting my final prosthesis on 6-28-22. I don't think they are gonna be zirconium. Now I'm anxious about potential problems. I was told that the best one could be added later so he went ahead and did a better implant so I could eventually go up in material. Is your price for both top and bottom or just lower or upper?
I have a question Dr. Choi. Does your practice do snap on dentures? And what are the pros and cons. I've been told I don't have enough bone for the all on four. So I though perhaps snap on dentures might not need as much metal in your bone. I love your videos!!
What does full mouth restoration start at, at your office? Thanks in advance!
If the top arch only uses traditional dentures due to my dentist saying the top does not have enough bones, so no implants. Lower can do implants and if lower arch is zirconia hybrid all on 4, should my upper also uses zirconia dentures too? Since if the top is PMMA, the bottom zirconia prosthesis might crush the top denture if it's just acrylic?
Aloha Dr. Choi, with good bone and healthy gums, Which is more expensive, Zirconia or Nanoceramic per Arch? Cost for full upper arch with nanoceramic? Thank You.
Dr Choi, will you work on out of state patients? I feel comfortable with you ,listening to you.
Id like the zirconia full upper arch. The bottom arch could use some shoring up .
I do have a very limited amount of bone, and I’m only able to get five implants on my top arch. My dentist is telling me the zirconia prosthesis will be too heavy and exert too much force on the implants. I know zirconia is the superior material but is he correct on that?
I just went and got all on 4 at the top I was told that I couldn’t get zicornia if I didn’t get it upped and lower when they offer the zicornia but they didn’t mention I have to do both is this true can I just get only my upper done with zicornia or will it break my bottom teeth
Doctor you say pricing for Zirconia 30 thousand top and bottom?? I had 6 Zigomatic implants on top. I pay 20 thousand and I thought I will get Zirconia bridge. Today they call me and they say I will get a PMA with a hybrid bar. I told the lady I don't care what I'm getting but I do not want any plastic in my mouth. I told her I did not went thru this surgery to get a piece of plastic. I wanted ceramic or something similar. At the beginning we agree with a zirconia bridge, now they are changing. Please let me know if the 30 thousand is for top and bottom
Thx Doc
What is your favorite color like your complexion please BL2,BL3,BL4 Thanks
Hello was just wondering if you're still responding the prices you are giving is that with implants or just the bridge Just curious cause I already got my implants was wondering average price of Bridge for zaconia
Thank you for sanity! I like your approach and agree with most of your information. Expansion and contraction of metal (amalgam) in my teeth eventually fractured a good number of them. Why am I to believe that metal implants will not do the same to my jaw?
The thermal expansion coefficients of teeth and titanium are almost identical. In other words, as a tooth expands or contracts with hot and cold, a titanium implant expands and contracts at a similar rate. Amalgam is MUCH more sensitive to thermal changes because it has mercury in it. That's why mercury is (was) used in thermometers--it changes very easily with temperature. So amalgam fillings will crack teeth over time if they are large enough because they expand/contract at a much higher rate than a tooth. Titanium doesn't have that issue.
What you say is misleading if not patently inaccurate. Titanium is not all that is in implants. If you are going to be accurate, then lets do so please. Implants are not titanium: They are titanium alloy principally with aluminum and vanadium in the Alloys. Aluminum has a horrific rate of expansion and contraction. Worse, Just as mercury is neurotoxic, so too is aluminum. Statistically the 3% of the population with the 4/4 allele expression of the apoliprotein E simply can not tolerate nor get rid of it and they should not have "Titanium" implants. The 16% of the population with the 3/4 expression at apolipoprotein E are moderately reactive to the aluminum This means nearly 1 in 5 patients that cross the threshold will suffer moderate to severe health consequences from Titanium aluminum alloy implants just as they suffered acutely and chronically from Mercury exposure. The original approvals for titanium as implant materials predate our better understanding of the human genome and in light of that new understanding IMHO no patient should receive an implant without appropriate genetic testing and without dental materials sensitivity testing like Biocomp or clifford or Melisa@@rmdunford
i have 4 implants top and 4 bottom with titanium bar - can i use snap on dentures made of zirconia?
I just went and got all on 4 at the top I was told that I couldn’t get zicornia if I didn’t get it upped and lower when they offer the zicornia but they didn’t mention I have to do both is this true can I just get only my upper done with zicornia
Sorry for my bad english. have a question. Can
zirconia complete arch
or hibrid break over the years? is it durable? Thanks
Are these new Hybridge procedures are they given plastic acrylic prosthetic as their final teeth?
I love your videos. So informative. I hope you don't mind a non dental related comment but could you hire someone to decorate your break room. I get that it's a dental office but could you add some color to the walls and some pictures? I can hardly take the back ground. As an oil painter/ decorated, it reminds me of a blank canvas and I can barely take it.
our room is symbolic of my personality. very blah. lol.
Haha oh my goodness. I don't believe it. I think it needs a bit of snap and color. Have some nice music playing, coffee station, maybe, TV, couple comfy chairs . Then add a couple nature pictures, some nice earth tones for the wall. Now that would be an awesome break you! And so much more pleasant for TH-camrs to look at. I tell ya what you pay for my flight from TN and I'll come down and design it myself free of charge.
I like the clinical look of it. Whenever I walk into a dentist whose office is tricked out, I know where the money is going, hence the need for higher prices .
I have the zirconium teeth which are great but the gum materail tends to scratch and chip. I have had to go back serveral times to get the gum materail smoothed out.
Thank God I found Dentaprime UK in London. Brilliant work, have their own lab for the teeth. 15k top and bottom zirconium and all extractions needed included.
Do you know any recommendations of colleges in Southern California for zirconia prosthetic services? I just had my extractions of remaining teeth and 9 bone graphs done. Thank You.
I dont know unfortunately other than the obvious usc and ucla
Hi, our towns dentists mainly do bridges with titanium inside and acrylic outer. They don’t offer other materials. Do you think that would be ok? Thank you.
depends on how much it is. if over 20k for it, then I dont think its worth it
hello Dr Choi,
is the NanoCeramic prosthesis just as good as Zirconia for all around bite chew and looks?
I personally like a well done zirconia the best. nano ceramic looks good and for bite but I worry about the longevity sometimes on certain patients. I think zirconia done well looks really good and the longevity is the best. however zirconia can look horrible sometimes if the wrong person makes it
$20-30k each (upper + lower) = 40-60k or $20-30k total both upper and lower?
I have insurance that will pay for the pulling of the teeth. I don't need bottoms just tops. I am looking into most likely doing the removable hybrid dentures so I don't have to worry about the food getting stuck in there. I've had a few consultations & I'm not even kidding you EVERY TIME THEY PUSH PUSH PUSH for flat out dentures FOR A 33 YEAR OLD. I really do need to get them done asap though cuz I have congestive heart failure & my doctor's keep telling me that it's concerning having the infection issues I have with my weak heart. I'm not really worried about the final cost I'm more concerned with the amount per month. Cuz that is what is going to make the difference.
Thanks for your attention , I hope you can help me.
I had all on 4 on the top and bottom jaws . I'm due to go back to Turkey in 2 months time to have
the temporaries removed and have a porcelain fused to metal prosthetics fitted,
Can I ask please what do I expect, will I need injections is it a big thing and painful ?
Any help to my question will be very much appreciated.
shouldn't be painful. they should just take impressions but I can't speak for that clinic
@@northtexasdentalsurgery Thanks for your kind reply
I see this happen 10 months ago i would like to know how you are happy with clinic in Turkey ?if they did a good job and how much it cost you ?
If zirconia is on top do you have same on bottom?
I appreciate the honest info. It's valuable but the moral of the story is the same: poor people will suffer
Do you have anyone in the Chicago subs that you can recommend.
What is your opinion on the Ultra Crystal Lite material? Thanks for any response. - Susan Burns
we offer crystal ultra nanoceramic, zirconia, etc. in my opinion zirconia is the best in the long term. maintains best esthetics, less bacteria buildup
Material is now showing a high fracture rate by dental laboratories. Stay away from this material. Never involved in any studies to support long-term success.
So six months ago I decided because of alot of problems with my upper teeth I was going to get them all pulled and get a denture. I did some research and because of the cost settled on a snap in denture. Having worn a denture for 6 months I've learned that the Pallet really bothers me but my dss prefers to leave alot of Pallet for support and suggested I look at a permanent full arch prosthetic. I've tried getting a price quote for it but nobody will give me one. So anybody, if everything is good with my bone graphs and implants, how much would a zirconium upper arch cost installed?
Im am getting full upper and lower X in all. I was quoted 30,000 per arch in the states and will have it done in the Dominican Republic for 16,000.I know many who have gone and had stellar results!
How they can have all on four, three on six but not half on two? If they can place a third of your mouth on two why not half. Patient who needs total replacement can heal after half is removed. Then go back and do the other half.
I’m in the finishing phase of completing all on 4 PMMA/titanium prosthesis. I have 4 on top and 4 on the bottom. I was told zirconia is too heavy for 4 implants and that I would need 6 on top and bottom to do zirconia. Is this true?
no that's not true. as long as you have good bone, enough volume and density, you should be fine with zirconia. i have plenty of older females with soft bone who only had 4 implants and have been fine for years with zirconia
@@northtexasdentalsurgery ok thank you. After a couple of year I’m going to upgrade to zirconia all on 4 bridges
My quote from the oral surgeon is 30,000 for removal and temporary. My dentist then wants 25,000 for the permanent six months later. She is of the opinion that zirconium looks great but it is too new to know how it stands overtime. She thinks it’s very strong, however, it’s brittle and can break, and if it does, you have to replace the whole arch. From what I’ve read, most dentist seem to prefer zirconium. What do you think?
What happens if you have zirconia permanant on top and then do you bottom a couple years later. Will the ziconia break your temps on the bottom?
if you get a chairside temporary on your bottom, the answer is probably yes. what i would recommend is get a digital milled or 3d printed temp on your bottom and you shouldnt see any breakage, provided the surgery and design was done right.
@@northtexasdentalsurgery Question! Can zirconia be secured with the old technology of being cemented on 8 healthy upper implants or will it have to be screwed in. Is it too heavy for cement?
Soooo, have Zirconium all on 4 , 7 months ago, EXTREME dry mouth, they say I might be allergic to the pink gum stuff- pmma? Going in to the implant place for them to remove uppers for 1/2 hr to see if I salivate. This is the most uncomfortable thing ever. I don’t have an previous problems with this. Dr. Said now one gland in my mouth isn’t working? Your opinion on what could cause this, please respond?! I can’t talk, sing, I eat and my mouth dries up. Dry mouth product don’t work. Desperate. $39000 later.
that's a good question. I have no idea. but if it is a zirconia prosthesis, the gums and teeth are made of the same material. let me know what happens
@@northtexasdentalsurgery at my visit yesterday, they offered to do full zirconia , apparently I have gums made from a composite with a clear over it. They said they will do full zirconia and while I was there with prosthetics out for half he, I salivated. My left cheek gland wasn’t working and they said the upper back corner of teeth were in the way, so they will bring that in, and in a month I will go back and try the new. They asked me to do a blood panel to see if I have issues, like Shogrens, but there are no sores, etc. and I have had a healthy body. Dry mouth is the worst thing I could ever experience, and am praying for a relief. Thank u for your response, I will let u know.😊🙏🏻
@@1wyldhare good to hear they will get you zirconia. those fixes should help you out
If i was to get the procedure done in Texas can any dentist or prosthodontist perform the maintenance in New York?
pretty much anybody with any familiarity to maintenance can do it anywhere. sorry for late reply
I asked if I could have zirconia and was told it wasn't needed for me and I would be fine with hybrid PMMA. They said zirconia was a very beautiful product but that it was more brittle so if it failed it would be worse than replacing hybrid PMMA. I was a bit taken aback that they were trying to talk me out of zirconia. Thoughts?
that's bs. I wouldnt mess with a hybrid versus a well done zirconia. I saw a patient recently with a hybrid and she was upset that her tooth broke off. idk why they told you that. and no, zirconia isn't brittle like that unless its poorly made
Hi Jon, another material is nano-ceramics. They're the Goldilocks of materials. I did a lot of research before I made the plunge. The titanium bar is replaced by nano-ceramic which is then "bonded" to the nano-ceramic bridge. These materials most closely replicate the characteristics of bone and teeth in compressive strength. Crystal Ultra and Trilor are the commercial names that I chose for my new and improved smile.
@@dougd2723 i have a full lower arch that was acrylic on cobalt. dds pushing full zirconia. can you post the options you used?
@@johnkutsch5155 Hey John, I'm gonna state the obvious, do your homework. Learn about the materials being used, and why. (IMHO zirconia is too heavy and the least adjustable.) Stay in US. What's the provider's history.
Where I started in my quest was not the normal route. I looked for information from "bridge makers", the people who make the bridges. The facility I went to has a lot of experience, and are at the forefront in developments. I chose G4 by Golpa. I've never looked better, seriously. I had a wicked narrow upper palate with an overbite. It took 10 yrs of cleaning toilets to save for them and I have to emphasize that these are my 3rd set of teeth. They're not fake they feel normal and you'd never know even when close.
@@dougd2723 I was thinking this today, to ask the manufacturers, thanks now I definitely will.
Are you allowed to NOT have a plastic prosthetic and just allow the implant to heal? Also, I want the implant zirconuim not titanium. I had materials / bio compatabilty testing done and titanium is a big ‘no no’ for me.
actually while the implants are healing to put any arch on those implants could create implant failure due to premature loading
No
You need to watch Dr Choi's other videos. If you are doing snap on, all 4 of your titanium implants needs to be inserted parallel to each other. After they are inserted, you don't want to snap on anything and allow the gum to heal around and implants. I found out the differences and the reasons for snap-ons to not use any plastic prosthesis is that the snap on implants are shorter and a locator abutment on the top. These shorter implants are more susceptible to move around while your gum/bones are not healed completely, so daily removal, snap on on these implants will mess up the alignment, so yes, you are not supposed to have "provisional prosthetics" for snap on implants. For hybrid implants, yes, you can use temporary plastic prosthesis since they are fixed and won't allowed you to move up down sideways etc.
I have been in my awful plastic temps for three months. They are intact but they really get gritty and grimey despite proper regular cleaning. They are like gunge magnets and food gets in behind and underneath and its a pain to get it out. I ha ve 6 implants top, 4 bottom, straumman implants with lifetime guarantee and full passport, I will get zirconia permanent teeth in three months . I hope I can pick the BL colours though and the shape as these are horrible! but in fairness the dentists had nothing to go on as i had no teeth at all when i had my first appointment .think it was guesswork but the teeth are way too small for my mouth
I did work on dental lab in France 🇫🇷... it’s interesting composites but very nasty and stinky... how is made the dental 🦷
That material is fine for a temporary fix, but it actually collects bacteria and is not good for long term oral health.
20-30k for the teeth. Not including surgery & pulling old teeth etc more like 50k just to be honest. Just got my consultation done for zirconium teeth top & bottom. Surgery in 2 months can’t wait to get my new teeth. Only thing is it’s basically a new car payment for the next 8 years. But I have faith they will last even after paid off.
If you want to replace 3 or 4 teeth then India is cheap , just have more information
I was quoted $60K for top and bottom zirconia arches not including 18 extractions, here in San Jose in 2022.
@bstallday: how did it go?
I am paying €7400 for full topand bottom restoration. 6 implants top and 4 bottom. This includes meds, xrays, scans, transfers and perms. I got to Bulgaria. No way could i get this else.
@@SeeYouEnTee666 Where in Bulgaria are you going to have this done?
Im having my procedure done in Miami Americas First Dental Implant Center - They only do Zirconia. $15k per arch. Pull them up and take a look!
Hello- I am thoroughly confused.. :( noone really explains the types of material the same-- I have heard of ceramic, zirconia, porcelain, nanoceramic, acrylic- and I have heard all on 4s also called hybrid so i am not understanding. my brain hurts ! PLEASE explain why there are so many different materials.. is Zirconia the same as ceramic/porcelain etc?? HELP!
yes zirconia is a ceramic
I got a question. Do they make zirconia with a titanium bar. My dentist said that. I'm thinking they're trying the bait and switch me .. i.paid 16k a arch. I've always heard zirconia is monolithic. So with a bar raised red flags
they actually do. they have it instead of tibase. its more expensive
I was quoted $30000 for an all on 4-6 upper with zygomatic, plerygoid, trans nasal implants including zirconia final prosthesis and two lower jaw implants. Do you think it’s reasonable?
That is a great price. I'm basing my opinion on all the recent research I've been doing trying to get this procedure done myself. I'm in Tampa, Florida.
Yes that is a great price. Just paid $48k for 30 extractions, 5 upper/5 lower screws. Custom ceramic zirconia upper and lower. Clearchoice. My price did not include the zygomatic implants, which might be more sturdy than what I have currently. Of course, I did not know about the possibility of zygomatic implants until after I completed my surgery.
@@AllkyWhat Clear Choice did you go to? Clear Choice in Indiana told me they wouldn't do ceramic.
Do you recommend the All on 6 over the All on 4?
I've been doing a lot of research myself, as I'm planning to get this procedure, and what I've learned is the more the merrier - that's if your jaw can take it. The idea is if one ever fails you're not stuck with 3. Age can also play a factor. Someone young, in theory, has many years left, which equates to many meals, lots of grinding, ect... Food for thought. Good luck!
I don't have any clue what you're talking about when you mention several times about an acrylic tooth breaking off. How is that even possible when the denture is 1 solid piece? It's not individual teeth glued to a titanium bar is it? I thought the bar was baked into the acrylic as 1 completely solid piece.
My dentist is talking about a porcelain prosthesis. What is that?
Did you ever find the answer to this? I was wondering the same thing because I asked my doctor for zaconia. But he keeps mentioning Porcelain
there is a company in UK called 21d... I was after a price for all on 6 as it is easier for myself than going to turkey... but they have just this minute told me that they only us mmma as zirconium is too rigid and breaks easily and less comfortable when biting ? so I really am confused 😕 after seeing your video I think they might be scamming people who haven't done their homework ?
I need your opinion! I reside in Georgia. Is there a way to get your opinion without flying there? If not, I will fly!
Have any X-rays or anything to show me?
@@northtexasdentalsurgery I can get them for you. I just had some done the other day. I am currently in a temp hybrid and have been. My problem is I feel I have lost upper lip support and my upper lip area looks extremely flat since having this done. I feel like an implant supported over denture or a Rebourke bar will give me the support, but my dentist says that he doesn’t want to see me in something not permanent bc of my age.
My all on 4 treatment for top and bottom was $66500, expensive but worth it.
wow. pricey. what city was that in?
@@northtexasdentalsurgery this was in Syracuse, NY
I had all on 6 on top and a on 4 on bottom done in Tennessee.. Start to finish for both cost me $18,000.. That's with a Zirconia final prosthesis..
@@edgarwhite9439 where the hell was this in Tenn?
I'm about to get this done in Memphis area and final cost is gonna be over $66,000
@@sleewatcher Dr. Rachel Johnson in Murfreesboro TN... She is awesome.. Tell her I sent u.. she'll know I told you how awesome she was and the price.. She doesn't believe that the future of dentistry should be available to those with deep pockets only.. She has multiple ways to finance.
Is that plain zirconia, or have they finally developed translucent zirconia?
Also you say it’s better functionality, and aesthetically, but never show a zirconia prosthetic.
A video of real life care of the “permanent” arches and how it differs from regular brushing and flossing would be good to see
monolithic zirconia. layered zirconia can chip. not a good idea
@@northtexasdentalsurgery not layered, just translucent.. guess they haven't gotten it refined for market yet
@@northtexasdentalsurgery are you saying that monolithic zirconia is best?
Great video! One office tried to get me to pay $28,000 for an acrylic lower all on 4!!! No thanks!!!
Are the Zirconium prosthetic arches titanium free?
yes
I got mine for $8999 per arch and they are zirconia. Total with everything I payed $23k for my whole month.
I'm sorry did you just say that you discounted the price of zirconia to the price of PMMA? No catch? If so Doc you are God. I have been watching your vids for a bit now and others because I need all on 4, hopefully I'm a candidate I don't see why I wouldn't be but never the less I'm trying to educate myself on this topic. I'm 42 and when I was 25 my front 5 teeth were broke off playing hockey and a few years after that a dentist had told me I needed all my teeth pulled after going to him for an infection. That scared me so much I haven't been to a dentist since plus money was always an issue along with generalized anxiety so you can imagine my situation I don't have many left. I haven't smiled since I was 25 and I have had so many infections it's just a horrible situation I wish upon no one. I would give anything to have this procedure done except money is kind of an issue for me and will take a while to save up that said I don't even know what it will cost I'm depressed just thinking about it. I have come to the conclusion I want zirconia instead of spending more money in the future to keep replacing things I think that's the smarter decision and I would definitely make the trip from Buffalo to your practice. Thankyou for posting these vids are very helpful we need more Doctors like you Dr. Choi. Can you give me a way to get in touch with your office please?
Dr his a handsome god 😍🥰🥰
@@zenyas7358 I think you made your point. lol
@@richsainsbury2285 😆😉😉
go to northtexasdentalsurgery.com give us a call. send us a copy of your X-rays. prob can tell u a ballpark cost over the phone if I see photos and X-rays. of course 3d scan is best but it may be tough with you being so far.
@@northtexasdentalsurgery Its called an ICAT I believe and yes can get you whatever you need I understand the difficulty alot of moving parts but am willing to travel almost went to Mexico to be honest there prices are very appealing anyways thankyou for the info I will certainly contact the office. thanks again.
Is it still 20 k to 30 k ?
its come down a bit. definitely should be towards lowers 20k. definitely not 30k
@@northtexasdentalsurgery Thank you just got quoted almost 65 k in Spanaway Washington for lower snap in and zirconia upper fixed I said I didn't want fixed upper but price for snap in upper was 28 k same as the fixed. Not having much luck finding a good dental implant office up here for a reasonable price any suggestions
I paid 52k plus a bit more
I paid a ton of money for my teeth..no taste..too big.. staining..what next..
It’s ineligible for Medicare
you're right
That's what I want trying to find a Dentist to take Wellcare Medicare
Medicare doesn't cover implants or dentures. Both my husband and mom have to pay for all of it. Which is ridiculous!!!!😡
They should be ashamed to give a patient some plastic denture teeth with acrylic material that probably cost less than 5 dollars to make while they collect 15 plus grand….
Why don't you respond to people.. HELLO Dr pimple popper..botched...etc..can u help us that are reaching out to you
what was your question. I respond to all my comments on videos every few days
@@northtexasdentalsurgery I have four on one..I can't eat and have staining in my front teeth
@@tamiirogers7775 who did your all on 4? are you in your temporaries or final? is it made of acrylic?
@@northtexasdentalsurgery these are my finals.. would rather not respond in public forum re who did it
@@tamiirogers7775 yes sorry to hear. yes that's the downside of acrylic and it must be discussed by your dentist. go in to get them cleaned. not sure how badly they are stained at this point. there are other options that dont stain so easily like zirconia or nano ceramics like crystal ultra
MY TOTAL 6 IMPLANTS AND TEETH COST ME 5,500 DOLLARS
AND THAT IS 12 TEETH BEING PULLED TOO A GREAT BUY WOULDN'T U SAY
@@barnmonster888 i paid 200 10 implants zirconia arches to boot
@@barnmonster888 where?
@@1mandrywallarmytv144 $200 ?
I need a phone
Sorry, but with a well-made prosthesis done with high-quality impact resin and state-of-the-art teeth, the chance of losing a tooth is basically zero. Staining or breaking is also not really an issue any longer. We are not in the 1980s anymore.
Guys take a nice vacation 2 a foreign country ., And while there have your implants done for75% less!!!!!!PLUS A TRIP! closest is Costa Rica, Colombia.
MY FALSE TEETH COST ME 1,000 DOLLARS
I just went and got all on 4 at the top I was told that I couldn’t get zicornia if I didn’t get it upped and lower when they offer the zicornia but they didn’t mention I have to do both is this true can I just get only my upper done with zicornia
I just went and got all on 4 at the top I was told that I couldn’t get zicornia if I didn’t get it upped and lower when they offer the zicornia but they didn’t mention I have to do both is this true can I just get only my upper done with zicornia