The easiest way to fix your shifter play no tools needed | Fj Cruiser | automatic transmission

แชร์
ฝัง
  • เผยแพร่เมื่อ 2 ต.ค. 2024
  • Step guide
    1. Unscrew the shift knob
    2. Remove the center console by pulling the rear part of the plastic
    3. Remove the small panel at the bottom of the handbrake
    4. Remove the shifter cover by pulling the lock (careful not to break the lock)
    5. By pushing the shift lock button move the lever to L to gain access to the shifter cable (if you don’t remove the shifter cover it will be hard to access the shifter cable eyelet as the black plastic will cover the bottom part of the shifter)
    6. Install the rubber bush into the shifter cable eyelet ( it will be more easy to put it back to the pin than the one I did on the video 🤦🏻‍♂️)
    7. Install back all the parts that you removed
    Please note that the oem rubber bush alone is not available in any autoparts store in my area unless you will buy the whole shifter cable kit.
    You can find this bush in used autoparts store or scrap yard just to show to them the video where the bush is installed, most of the Japanese automatic transmission cars has the same part like this.
    Thank you.

ความคิดเห็น • 12

  • @dalat1
    @dalat1 ปีที่แล้ว +1

    Thanks for the video that was exactly the problem. Saved me a lot headache and money.

    • @iandilag5425
      @iandilag5425  9 หลายเดือนก่อน

      Glad it helped

  • @DiegoHernandez-sy2ry
    @DiegoHernandez-sy2ry 2 หลายเดือนก่อน

    Hi, I have a problem with mine
    It just don’t stick in L or 4, any idea which would be the problem?
    Thanks

  • @tracyluljak2389
    @tracyluljak2389 ปีที่แล้ว +2

    How did you get that white plastic off? Mine has a cable from the yellow button that prevents me from lifting it over the shifter. After that there's another black piece surrounding. My bushing is gone but I'm stuck at the white plastic.

    • @iandilag5425
      @iandilag5425  ปีที่แล้ว

      Tracy Luljak Hi. You dont need to remove that white plastic cover, just shift your lever to 2 or L then you can reach the eyelet of the cable.
      The yellow button you are saying is a light bulb to illuminate the gear indicator 😊

    • @iandilag5425
      @iandilag5425  ปีที่แล้ว

      Follow the instructions on the video and you can finish it in less than 15minutes

    • @gloryglory5709
      @gloryglory5709 3 หลายเดือนก่อน

      he skipped over that part

    • @gloryglory5709
      @gloryglory5709 3 หลายเดือนก่อน

      @@iandilag5425 how did you do that when you were stuck in park

  • @veek3982
    @veek3982 9 หลายเดือนก่อน

    Thank you, sir! Your vid enabled me to get to that teeny bulb in order to replace it. And for those who need to know, a direct replacement bulb size - Sylvania 2721.

  • @greggorgon1645
    @greggorgon1645 11 หลายเดือนก่อน +1

    Thanks

  • @050917252
    @050917252 ปีที่แล้ว +2

    Thank u , ur video really help me ❤