I built a new Trampaboard this year as well. Many parts such as VESC, motors, and battery PCBs have been newly released or upgraded. I was really looking forward to the performance during the assembly. So, I'll be back with a riding video next time. Also, note that the current 16mm Pro Belt drive offers a £100 discount. 올해도 새로운 트람파보드를 빌드했습니다. VESC나 모터, 배터리 PCB등 많은 부품들이 새로 출시되었거나 업그레이드 되었습니다. 조립하는동안 퍼포먼스가 정말 기대되었습니다. 다음시간에는 라이딩 비디오로 돌아오겠습니다. 또한 현재 16mm 프로벨트 드라이브는 100파운드의 할인을 받을수 있으니 참고하세요.
I love watching your build videos! I love how meticulous your wire placement is and how you heat shrink everything because I'm the same way. Looking forward to the next video when we get to hear those motors scream. Thank you for your awesome content.
This was so awesome to watch and to top it off, doggy has given the approval. If it was me, it would be a tractor by now with wires mixed and battery smoking 😁
⚡🤙🏼 *Mmm, trucks & bushings* 🤩⚡ One of them looks like a Blood Orange "Wedge" shape bushing, hard to find those. Always nice to watch you build! Looks like you do it so quick yet it's so well done, so cleeean!! Even the grip tape is SO precise 👌🏼👌🏼 Maaan I'm lookin forward to you ridin that and describin how the trucks feel to skate!
Oh really? I didn't care about the shape of the bushing. However, I chose the softest type according to my weight. Perhaps, more flexible movements are expected than the Vertigo trucks. I'm also looking forward to riding this ASAP. And thank you for always watching the video in detail. Bro~ :)
Thats a well detailed & beautifully assembled Pro Belt Drive you have made there brother! The extra power in the HP VESC's is impressive, take your time on the first test run... Cant wait to see that!
I think this is bad to do. Especially, the battery chemistry. I see three issues with this. The amp draw has to be set to Samsung 40T, different temperature and he is not using the full potential of p42a capacity. I don't know, but I find this risky.
Yeah, I mixed four P42a cells. This is because the voltage of the four 40Ts I had fell abnormally. This is a temporary measure and will be unified into 40T cells in the future. And of course, it's stable to use the same cell and that's a recommendation. Anyway, thank you for watching the video in detail.
Yeah, I mixed four P42a cells. This is because the voltage of the four 40Ts I had fell abnormally. This is a temporary measure and will be unified into 40T cells in the future. And of course, it's stable to use the same cell and that's a recommendation. Anyway, thank you for watching the video in detail.
@@KAMiJUINs can u tell us some details about the differences? is a new massive monster bix required to fit the new pcb in or is it compatible with the old massive monster box? thx in advance :)
Impressive. I don't see new pcb battery on the website, only "fit lipo". If I buy one, is it better a gear or pro belt drive? And 15mm or 20 mm? I weight 75kg (165lbs). A lot of question but you are a pro you know all😊. Dog too cute every time
네 안녕하세요~ 글세요 저도 해보지 않아서 확실하게 말씀드릴수가 없어요. 하지만 이론상으로는 안될것 같지는 않습니다. 일단 VX4 리모트 리시버 케이블 단자 배열과 트람파 V6hp VESC 소켓의 연결 배열이 같은지 확인부터 해보시구요. VESCtool에서 App settings --> general에서 UART 설정을 해주셔야합니다.
I have a challenge for you. Can you build the most stealth hybrid board possible? Let me explain: in a bunch of European countries eboards are illegal (and they actually enforce this) this board will have the goal to fly under the radar in those places. I am thinking something like: Kick to start Kick assist with speed decay (so you have to keep kicking, but not nearly as much as a normal board) Top speed isn't a priority Range isn't a priority Should look as much as a normal board as possible, so maybe hidden battery/buttons. Or as least as much as possible.
Did you ask Tampa not to assemble the board when you ordered it? Pure darkness theme that made me thinking the name"Dark Vader" is also suitable for this board.🤔
@KAMi JUINs Hello, I have a question for you because I see you also have 2x vesc. Have you ever had a situation where when you turned on the box using the button, one vesc lit up and when you turned the box off, the second vesc lit up?? Is it true that you need to gently move the cable so that the switch light comes on and turn it off until two vescs go out and spin the wheels by hand until synchronization occurs and from that moment on, two vescs will light up every time you turn on the button?
It may be a simple configuration mistake or a problem with the order of connector connections. If your board has the symptoms, please contact the Trampa service team with photos. They will keep you informed. (dave@trampaboards.com)
@@KAMiJUINs And I have a question about this box, what do you have, because it's an old 21700 box and a new PCB, did you make the charging connector and switch in the cover yourself? Are you so pissed off from tramp?
@@KAMiJUINs Tell me one more thing, because I have this older 21700 box and I generally fixed it, but now I have a different problem, namely 2 vescs are on but the switch is also on, I'm trying to turn it off with the button but it doesn't respond at all so that the box turns off, do you think it could be the switch or the cables? with the plugs that are plugged into the upper PCB, have you ever had such a problem?
I’ve been skateboarding & surfing for 10+ years, really wanna pull the trigger on my first Eskate, and it’s vids like this I LOVE seeing. I don’t want to spend $1000+ on something I don’t understand, and it’s people like you that really help a newb like me to better understand the technological part of Eskating 👏🛹👍
I built a new Trampaboard this year as well. Many parts such as VESC, motors, and battery PCBs have been newly released or upgraded. I was really looking forward to the performance during the assembly. So, I'll be back with a riding video next time. Also, note that the current 16mm Pro Belt drive offers a £100 discount.
올해도 새로운 트람파보드를 빌드했습니다. VESC나 모터, 배터리 PCB등 많은 부품들이 새로 출시되었거나 업그레이드 되었습니다. 조립하는동안 퍼포먼스가 정말 기대되었습니다. 다음시간에는 라이딩 비디오로 돌아오겠습니다. 또한 현재 16mm 프로벨트 드라이브는 100파운드의 할인을 받을수 있으니 참고하세요.
I love watching your build videos! I love how meticulous your wire placement is and how you heat shrink everything because I'm the same way. Looking forward to the next video when we get to hear those motors scream. Thank you for your awesome content.
Thank you for saying that and watching :) I'm looking forward to riding this, too.~
This was so awesome to watch and to top it off, doggy has given the approval. If it was me, it would be a tractor by now with wires mixed and battery smoking 😁
Haha, yes, that's what dog sticker mean :) And if you order, the finished product will come, so that's not happen lol~
I feel like if I needed surgery I could put my money and hopes in you. So precise. Great video, enjoyed every step of the way.
Thank you for saying that and watching ~ :)
I so enjoy watching your esk8 videos, it's a treat!
HaHa, Thank you for watching my videos too~ :)
The precision you built that board with was awesome!! You made it look so easy almost like I could do the same lol great video dude!
That's what I wanted HaHa~ Thank you for watching :)
I'm glad to see you do this build. I made one similar with parts from Trampa and I used the trunks with springs. great ride!
I like that truck, too.~ I hope you enjoy your riding :)
⚡🤙🏼 *Mmm, trucks & bushings* 🤩⚡
One of them looks like a Blood Orange "Wedge" shape bushing, hard to find those.
Always nice to watch you build! Looks like you do it so quick yet it's so well done, so cleeean!! Even the grip tape is SO precise 👌🏼👌🏼
Maaan I'm lookin forward to you ridin that and describin how the trucks feel to skate!
Oh really? I didn't care about the shape of the bushing. However, I chose the softest type according to my weight.
Perhaps, more flexible movements are expected than the Vertigo trucks.
I'm also looking forward to riding this ASAP.
And thank you for always watching the video in detail. Bro~ :)
@@KAMiJUINs It's a similar shape to fat cone so is very useful for stability.
Thats a well detailed & beautifully assembled Pro Belt Drive you have made there brother! The extra power in the HP VESC's is impressive, take your time on the first test run... Cant wait to see that!
Thank you for coming and watching, Brother :) Yeah, I did my best!
My two Favourite things Dogs & Esk8 :) Awesome content as always :)
Thank you for watching for a long time too~ :)
Very nicely done!
Thank you x1000 :)
라이딩 영상 기다리겠습니다
네 시청 감사합니다~ :)
AMAZING BUILT!!!
Thank you for watching :)
I love your videos!
Thank you so much~ :)
Yep good job 👍
Thanks~ bro :)
장인의 손길이 느껴지는 영상 ! 멋나네유
오랫만이세요~ :) 시청 감사합니다!
Such a nice board 👌
Thank you so much as always, bro :)
Nice built😀
Thanks, bro~ :)
Is it bad to mix battery types? I saw mostly 40T's with some P42A's.
I think this is bad to do. Especially, the battery chemistry. I see three issues with this. The amp draw has to be set to Samsung 40T, different temperature and he is not using the full potential of p42a capacity. I don't know, but I find this risky.
Yeah, I mixed four P42a cells. This is because the voltage of the four 40Ts I had fell abnormally. This is a temporary measure and will be unified into 40T cells in the future. And of course, it's stable to use the same cell and that's a recommendation. Anyway, thank you for watching the video in detail.
Yeah, I mixed four P42a cells. This is because the voltage of the four 40Ts I had fell abnormally. This is a temporary measure and will be unified into 40T cells in the future. And of course, it's stable to use the same cell and that's a recommendation. Anyway, thank you for watching the video in detail.
@@KAMiJUINs Ok. I was about to say. lol Stay safe!
That battery enclosure... Is it safe to use?
I haven't had any problems yet~
cant find the new 21700 pcb on their homepage... where to get one?
Please wait~ It'll be out soon :)
@@KAMiJUINs can u tell us some details about the differences? is a new massive monster bix required to fit the new pcb in or is it compatible with the old massive monster box? thx in advance :)
와 시커먼게 그냥 배트카같네요;; 다크나이트 느낌 팍!
아 그런가요 ㅎㅎ 다른 컬러로 해보려다가 그냥 심플한게 좋겠다 샐각해서 전부 블랙으로 덮어버렸습니다~
진짜 전동보드의 끝판왕... 저거 타면 험지도 포장도로처럼 느껴지겠네요
원래가 오프로드 특화용 보드라서 그런지 조립과정에서도보면 부품마감이라든지 완성도가 굉장히 좋았어요.
아마도 잘 달릴것 같아요~ 항상 시청감사합니다 :)
good work bro 👌👌😊😊
Thank you as always, bro :)
Hi which is the best electric board to buy? Trampa boards or Ecomobl Telum? Or any other? Please guide?
If you want to enjoy the best boards off-road, go with the Trampa board~
What model is this on there site and what battery is it using? Like this but its site is confusing to order
The exact same model as this hasn't been released yet. But it will be released soon.
Please wait a little longer.~
That looks sick. pleace make riding video i want to see!!!
Yes, I will~ :) Thank you for watching
@@KAMiJUINs ayy absolut legend
엄청수고스러운데 가지고싶네요
저는 컨텐츠를 위해 직접 조립한거구요, 보통은 주문하시면 완전히 조립된 보드를 받으실수 있습니다 :)
Impressive. I don't see new pcb battery on the website, only "fit lipo". If I buy one, is it better a gear or pro belt drive? And 15mm or 20 mm? I weight 75kg (165lbs). A lot of question but you are a pro you know all😊.
Dog too cute every time
The new PCB will be released in May.And for that weight, I recommend 16MM Pro Belt Drive or Open Belt Drive.~
And Thank you for watching :)
I wonder when trampa will have tubeless tires?
Well, I don't know about that. But still, I prefer tires with tubes :) Thanks~
안녕하세요 브식이hp에 플립스카이vx4리모콘이 호환이 안되는건지 궁굼합니다
완드로만 가능한건지 알려주시면 감사하겠습니다
혹시 vx4로 리모콘 셋팅이 가능하면 방법좀 알려주세요
완드로는 셋팅이 되는데 vx4는 연결이 안되서 댓글 남김니다😊😊
네 안녕하세요~
글세요 저도 해보지 않아서 확실하게 말씀드릴수가 없어요.
하지만 이론상으로는 안될것 같지는 않습니다.
일단 VX4 리모트 리시버 케이블 단자 배열과 트람파 V6hp VESC 소켓의 연결 배열이 같은지 확인부터 해보시구요.
VESCtool에서 App settings --> general에서 UART 설정을 해주셔야합니다.
그리고 리모트 설정창에서 FSESC와 Focbox 둘다 번가라가면서 연결시도해보세요
Красивые двадцать две минуты.
Спасибо большое за просмотр~ :)
Oooooooh yeaaaaah 🛹🙌👀
Thank you for watching :)~
@@KAMiJUINs - I love your vids. They’re like asmr skateboard porn 🛹🙌😍👌
직접 구매해서 조립하시는건가요?
스폰을 받고있습니다.
I have a challenge for you. Can you build the most stealth hybrid board possible? Let me explain: in a bunch of European countries eboards are illegal (and they actually enforce this) this board will have the goal to fly under the radar in those places.
I am thinking something like:
Kick to start
Kick assist with speed decay (so you have to keep kicking, but not nearly as much as a normal board) Top speed isn't a priority
Range isn't a priority
Should look as much as a normal board as possible, so maybe hidden battery/buttons. Or as least as much as possible.
Did you ask Tampa not to assemble the board when you ordered it?
Pure darkness theme that made me thinking the name"Dark Vader" is also suitable for this board.🤔
Why not, I like it. Dark Vader haha :)
And normally a fully assembled board is sent but you can get it like me if you request.
plz try backfair zealot x😢
TK
Thank you for watching ~ :)
안녕하세요 JUINs, Gmail 받은 편지함을 확인해 주실 수 있나요?
Every time I touch a tool, I brake something.
again and again... will be better~ :)
can you tell me how much it cost to make a skateboard like the one in the video?🫣
@KAMi JUINs Hello, I have a question for you because I see you also have 2x vesc. Have you ever had a situation where when you turned on the box using the button, one vesc lit up and when you turned the box off, the second vesc lit up?? Is it true that you need to gently move the cable so that the switch light comes on and turn it off until two vescs go out and spin the wheels by hand until synchronization occurs and from that moment on, two vescs will light up every time you turn on the button?
It may be a simple configuration mistake or a problem with the order of connector connections. If your board has the symptoms, please contact the Trampa service team with photos. They will keep you informed. (dave@trampaboards.com)
@@KAMiJUINs And I have a question about this box, what do you have, because it's an old 21700 box and a new PCB, did you make the charging connector and switch in the cover yourself? Are you so pissed off from tramp?
@@KAMiJUINs Tell me one more thing, because I have this older 21700 box and I generally fixed it, but now I have a different problem, namely 2 vescs are on but the switch is also on, I'm trying to turn it off with the button but it doesn't respond at all so that the box turns off, do you think it could be the switch or the cables? with the plugs that are plugged into the upper PCB, have you ever had such a problem?
Hi, I sent you a email recently about one of your projects and would appreciate it if you could take the time to reply whenever free! Many thanks
Okay, I will check~ :)
@@KAMiJUINs Thank you!
I’ve been skateboarding & surfing for 10+ years, really wanna pull the trigger on my first Eskate, and it’s vids like this I LOVE seeing. I don’t want to spend $1000+ on something I don’t understand, and it’s people like you that really help a newb like me to better understand the technological part of Eskating 👏🛹👍
Thank you for saying that and watching :)
can you tell me how much it cost to make a skateboard like the one in the video?🫣