Wish I saw this video earlier. I had such a tough time disassembling my Type R. Now the whole car is pretty much finished except for the bumpers and side skirts. Thank you so much! I was trying to figure it out myself but couldn't
what about the 2 black rubber pieces at the bottom of the panel? it has 3 holes that both clip into. they are located on either side of the latch. you totally skipped that and that is the only thing I haven't done before. everything else, I've done a kazillion times, and you explained everything very well for people who don't know. great job! People listen to this guy, very good at what he does and very thorough with how things could happen. he'll save you from learning by breaking plastic.
What a Guy!!! you helped me out on loads of bits, I am taking the wrap off my new R and needed to know some of the Techniques used. Keep up the content bro and thanks for posting 👊🤟
Thank you so much for this video. I need to replace my side skirts and there was no proper video of how to do so. The only thing you didn’t show is how to put it back on. I understand you should put it on the same way that it was taken off but is there some sort of procedure with the clips of how you slide it back on? Call it seems to remove it is very easy but I’m wondering about reinstalling it
Thank you for this video. I replaced my side skirt because it had small imperfections. My only issue is after replacing the side skirt the The black air vents that are on the back of the fender is sticking out a little bit on the bottom. Do you know if there’s a way to fix this without disassembling the side skirt? I tried taking the screws out that are located behind the front wheel pushing the vent in and tightening the screws however that did not work. It’s only sticking out a little bit but for me it’s noticeable. Just wondering if you can give me any insight
Question though, how do you completely disassemble the spoiler? I removed the wing and disassemble the center piece from the two winglets. But now i can't seem to figure out how to remove the stands from the winglets. I can see the two T-30 screws in there but how do i get to it?
Zefoo so if you look inside the bases where the two pieces meet you can see some tabs in there that are epoxied together. You have to stick a long and thin screw driver in there and literally break them apart. I try sticking the flathead under the tabs and then pushing and twisting to kind separate the tabs and break the epoxy off. After you’ll have to JB wel it back together
@@misapatos I'm actually about done with the wrap and got another question lols. So the side skirts slide off but when you re-install it, do you slide back on or remove all of the clips from the car and slide them on the skirts, then pop the skirt back in?
This is hands down the best video on how to dissemble a Type R !!! Thanks for the content!!
@@RickHummer of course!
Wish I saw this video earlier. I had such a tough time disassembling my Type R. Now the whole car is pretty much finished except for the bumpers and side skirts. Thank you so much! I was trying to figure it out myself but couldn't
A type r ain't that big of a car........ that's like a beginner car for a racer
Hey im building my fk7 to have a oem type r body so this was super helpful ty! I had no idea had the fender flares were clipped on like that.
what about the 2 black rubber pieces at the bottom of the panel? it has 3 holes that both clip into. they are located on either side of the latch. you totally skipped that and that is the only thing I haven't done before. everything else, I've done a kazillion times, and you explained everything very well for people who don't know. great job! People listen to this guy, very good at what he does and very thorough with how things could happen. he'll save you from learning by breaking plastic.
Which ones are you talking about? Above the headlights?
What a Guy!!!
you helped me out on loads of bits, I am taking the wrap off my new R and needed to know some of the Techniques used.
Keep up the content bro and thanks for posting 👊🤟
Best guide and helpful for those DIY wrappers, thanks for the guide.
Kao Lee no problem at all!
This is very very helpful, thinking of wrapping mine myself soon. Thanks a million. Cant believe only 1000 views so far.
Dam bro life saver. Taking of the wrap from my type r was easier watching this video
Been struggling with installing mf CF lip kit replacement for all the faux shit on my R, this video is a gamer changer! Thank you!
Glad it helped man
As of Apr 27 2024, best detailed video how to take everything out the 10th gen
Great video for DIY on the type r. Appreciate it!
Of course!
Thanks for making this video, great detailed guide.
So good. Thanks for sharing the video 👍
Thank you so much for this video. I need to replace my side skirts and there was no proper video of how to do so. The only thing you didn’t show is how to put it back on. I understand you should put it on the same way that it was taken off but is there some sort of procedure with the clips of how you slide it back on? Call it seems to remove it is very easy but I’m wondering about reinstalling it
Wow. Great video. And 95% of these stuff work with the 1.5 Hatch too. Thanks!
Szabo Balazs glad it helped!
Thanks bro you really go into detail
YOU DA REAL MVP!!! Thank you!
explained very detailed and clear. thank you so much👍👍👍👍👍👍👍
Of course! Thank you
Thank you for this video. I replaced my side skirt because it had small imperfections. My only issue is after replacing the side skirt the The black air vents that are on the back of the fender is sticking out a little bit on the bottom. Do you know if there’s a way to fix this without disassembling the side skirt?
I tried taking the screws out that are located behind the front wheel pushing the vent in and tightening the screws however that did not work. It’s only sticking out a little bit but for me it’s noticeable. Just wondering if you can give me any insight
Bro! What A Hero!
lol when he just pulled the vortex generators off with ease.
21:02 i dont really like brisk either bro ! 😂
Under rated comment lol. Don’t know why I’m going through these comments rn but this was funny lol
Thank you
I’m buying a Honda Civic type r 2019 but I need to replace the front bumper any suggestions where I can buy one
Goat
SUPER helpful
You’re an angel. ❤
Does the top part of the front bumper come off or is it part of the entire bumper?
How do you remove the glossy pillara trims on the side doors?
Dealership will have to do that.
Sick ass braids!!
nice thx
Yoo is there any chance you know where I would be able to get some of the clips for the side spoiler?
Which ones brotha?
What side spoiler are you referring to?
The side skirt you start to dissemble on min 10:15
Nice video
Question though, how do you completely disassemble the spoiler? I removed the wing and disassemble the center piece from the two winglets. But now i can't seem to figure out how to remove the stands from the winglets. I can see the two T-30 screws in there but how do i get to it?
Zefoo so if you look inside the bases where the two pieces meet you can see some tabs in there that are epoxied together. You have to stick a long and thin screw driver in there and literally break them apart. I try sticking the flathead under the tabs and then pushing and twisting to kind separate the tabs and break the epoxy off. After you’ll have to JB wel it back together
@@misapatos Thank you again. I will try that today
@@misapatos I'm actually about done with the wrap and got another question lols. So the side skirts slide off but when you re-install it, do you slide back on or remove all of the clips from the car and slide them on the skirts, then pop the skirt back in?
Zefoo take the clips off and put them on the side skirt to pop it back in. You turn them a little so it’s diagonal and pull them out. Easy peasy.
@@misapatos Finished the car last week, wrapped in 3m satin dark grey. Thank you so much for your help!
How do you remove the front fender vent?
Oh Its insomnia there’s a clip at the top on the inside and a Phillips head on the bottom of it also on the inside
Can you show me how to disassemble my heart
Big C shotgun should help with that
If you dont send this car going fuckin over 600 whp then dont say your gonna fix it... because obviously anyone can put on a fucking bumper
the type r engine
What?
@@misapatos jp man xD
Hablas español ?
Claro que si