Found u on tik tok and this is great content! No beating around the bush or wasting our time. Just straight to the content u get my sub sir. Car looks great btw!
Kordare I’m from the Pittsburgh area and have an 06 with air ride and twin turbo set up. If you ever get down this way we’ll have to compare notes and builds. Lol.
If you don't like the angle of the top piece, instead of making a new mount- removing it, you could just make & adhere a filler piece on top of it with whatever shape you want to try out until you find a shape you like.
Don't feel bad I'm a professional painter and I get drips from lid being wore out. I wrap a paper towel around edge of cup. Try wrapping around edge of can just below spray pattern. Also they make a spray can handle, so it kind of like a realish paint gun
Thanks for the tip! And yeah I actually started by using a handle, but it's either worn out or these cans took more force than normal because I couldnt get it to consistently spray. So I had to ditch it and get finger cramps 😂
@@thomasalgrim614 I actually painted my old 240sx with one of those! But when just doing individual panels, I enjoy the convenience of these pre-mixed cans.
@@Kordare that's nice to know...I never really painted but....I love cars in general and I'm going to school for it in a couple months and my dream car is in my driveway lol 1991 foxbody mustang 5.0 (not mine yet)
Nice detailed plan. Just curious if your going to beef up the inside of the widebody fenders? I’m sure the plastic does a great job with the rigidity of the whole piece. What are you thoughts on it? I assume that monster is going to see high speeds often and those fenders could see some high mph winds. 👍🏽
As of now I'm just going to see how it is. With the initial fitment, it seems like they are very solid with the eight 1/4-20 connection points. It's possible I will add to it in the future.
Riv-nut tool: for those going to buy one, don't get the kind in this video. Get the two handled style (think garden shears). Way better and not expensive.
I got them done as a favor from a shop that doesn't actually take outside work. But any basic machine shop that has a router table should be able to do these easily.
Ok hopefully ill find a decent shop here. But hopefully i can start the build in about 9 months. Leaves me time to hopfully write out my plan. Plan on swaping in a 2017 5.0, swapping back end and so on and doing videos on youtube to show people tips and so on. Hopefully make a little to try and make it better. Would you be ok that once i do i throw you a shout out.
Found u on tik tok and this is great content! No beating around the bush or wasting our time. Just straight to the content u get my sub sir. Car looks great btw!
Appreciate the support 🤘
Think you've given me a ton of ideas brother. Been following the mustang since u started it.
I'm glad I could help and really appreciate the support!
Skill noticing skill.
I see a trend starting here
OMG, just got back home after seeing the notification for the vid. FULL HYPE!!!
😁😁
one of the most entertaining builds on youtube
Appreciate it 🖤
This mustang is gonna be well known in the car community....its gonna be legendary!!!🤘🏼🇺🇸
I'm excited to show everyone the finished look 🤘🤘
Genius idea for the junkyard widebody, very clean setup that still looks OEM but with some beef. Nice craftsmanship man!
Thanks a lot! Just did the final install today 🤘
crazy how much your channels grown since the 240 been a follower since then keep it going👌
I really appreciate the support!
5 days late :/ but, I have to say this is the most creative wide body I have ever seen!! So excited to see where this car takes you!
Thanks man! I've got it all together and will have the final install video out in a couple days 🤘
Kordare in the words of Kevin Hart... “SO ESSSITTEEEEDDDD” lol
@@emokid3167 😂😂
What a cliffhanger! But I'm glad you put out an update. Happy you haven't had many hiccups so far. 👍👍👍👍
Haha yeah sorry, but should be getting them on today!
@@Kordare
You do your thing brother! 😆
i love this build. diy junkyard widebody FTW! 👍
Thanks 🤘🤘
You are setting new standards in wide body mods. Respect all the way from Pakistan.
Appreciate it. Just been experimenting with new things every chance I get.
Looks Mint, can't wait to see them on the car.
Thanks 🤘
What a tease
Hahah I know right, should have them on this weekend though
Great work man.
Thanks 🙌
Kordare
I’m from the Pittsburgh area and have an 06 with air ride and twin turbo set up. If you ever get down this way we’ll have to compare notes and builds. Lol.
@@batmanx25 sounds awesome, definitely will!
Great work as always.
Great footage and great fabrication, keep on rockin'😎🤘
Appreciate it man 🙌
I’m glad to see someone accomplishing this, I had the same thought just never got around to doing it
It's been a lot of work, but finally making good progress
Not gonna lie, looks super professional. This man doesn't get enough credit.
Appreciate it 🙏
fascinating process.
this already looks 10x better than Johnathon Harder build
Thanks, editing the final install video now 🤘
Nice, precise work as always. Looking forward to the end product
Thanks, hoping to get them on this weekend
Pumped to see them on the car . Great work
Should have them on this weekend!
I’ve BEEN WAITING for this video
Sorry it took so long 😁😁
I can’t wait to see the final product
Getting them on this weekend 🤘
Kordare Ouu amazing!! I’m looking forward to seeing them on
Keep up the good content man! I'm looking forward to see the finished product
😀👍
Thanks! Should be getting them on this weekend 🤘
Thanks for bringing us yet another vibe 🥂 enjoyed
🙌🙌
Keep it up 👍🏽
If you don't like the angle of the top piece, instead of making a new mount- removing it, you could just make & adhere a filler piece on top of it with whatever shape you want to try out until you find a shape you like.
Yeah definitely, I was thinking the same thing 👍
Dude, Yes! This is awesome
Thanks 🤘🤘
When you adjust the engle of those mounts it'll for sure clean up the look. I'd be interested in purchasing a set
I actually did the final install today and really dont mind the angle.
Bro, nice work. Looks like a pro did it for sure
Appreciate it 🙌
Love the car man. If anything happens to the 3v, maybe think about that 4.0 Barra engine. Keep up the good work my dude 🤙🏼
Thanks a lot!
Love it
Thanks!
Found you on Tik Tok a few weeks ago and now I gotta su subscribe.
Appreciate the support 🙏
Don't feel bad I'm a professional painter and I get drips from lid being wore out. I wrap a paper towel around edge of cup. Try wrapping around edge of can just below spray pattern. Also they make a spray can handle, so it kind of like a realish paint gun
Thanks for the tip! And yeah I actually started by using a handle, but it's either worn out or these cans took more force than normal because I couldnt get it to consistently spray. So I had to ditch it and get finger cramps 😂
Harbor freight has some cheap hvlp spray guns I use them. Get them dialed in and they work good.
@@thomasalgrim614 I actually painted my old 240sx with one of those! But when just doing individual panels, I enjoy the convenience of these pre-mixed cans.
Man, your mustang is badass🤟🏻🔥
Thanks a lot 🤘
How does rattle can even turn out that good???😂🤘🏼🇺🇸hell yea man....looks dope
Just take your time and follow proper prep and painting steps and it usually comes out pretty decent, thanks 🙌
@@Kordare that's nice to know...I never really painted but....I love cars in general and I'm going to school for it in a couple months and my dream car is in my driveway lol 1991 foxbody mustang 5.0 (not mine yet)
love that mustang
Thanks 🤘🤘
Here before the inevitable sub count spike 😂 love the channel man
Maybe someday, thanks man 🤘
Nothing a lil buffing will fix👀💯🇺🇸
10:00 the real point of no return lol
Haha yuuuup
nice
👇 I couldn’t agree more!!!
Keep it going. Following closely this build.
editing the final install video now!
Nice detailed plan. Just curious if your going to beef up the inside of the widebody fenders? I’m sure the plastic does a great job with the rigidity of the whole piece. What are you thoughts on it? I assume that monster is going to see high speeds often and those fenders could see some high mph winds. 👍🏽
As of now I'm just going to see how it is. With the initial fitment, it seems like they are very solid with the eight 1/4-20 connection points. It's possible I will add to it in the future.
Kordare - Right on man. Looking forward to seeing more of the build. 🤙🏽
@@Fahrenheit_Motorsports polishing the quarters as we speak 🤘
No-one:
Also no-one:
Still no-one:
Internet: Ha! Imma randomly switch to 144p
hahah oh noooo
Looks nice! My question is how you will bolt the lug nuts there’s no space
Yeah the middle 2 were the most difficult but I could reach in from underneath to tighten them before doing any of the bottom connections
Maybe you should replace that top bracket with steel and have a cover plate on top that connects the body lines.
I may add to it eventually, gonna wait and see how I like this look first.
Riv-nut tool: for those going to buy one, don't get the kind in this video. Get the two handled style (think garden shears). Way better and not expensive.
Once I got them set correctly they worked well, but yeah a two handle would have been easier for sure
Your gonna blow up on TH-cam, I’m calling it!
Just gotta keep working 🤘
Why did you choose to glue the studs to the overfender instead of tack welding?
Looks great still following the build! Also are you going to paint match the mounts or leave them black?!
Thanks! Planning to leave them black for now, should give a similar look to the front.
Kordare ahh yes because you have the black gaps in the front, nice that will look great!
@@stevewagner998 Exactly!
Are you gonna have to drill drain holes in the top mounts? Seems like rain water could get trapped in there and sit. Looking good so far!
Honestly I rarely drive it in the rain, and when I wash it I'll dry it off so it shouldn't be a big issue. Thanks!
800 grit is very smooth for paint! 320 would have been plenty
I like to go at least 500 but yeah I prolly didnt need the 800. Had good adhesion though.
Where did you get the rivet nuts and tool?
Here's the tool I used: amzn.to/3cGKTWX
This kit comes with assorted rivnuts as well: amzn.to/2TJsnVb
Where did you get your rivet nut tools?
Here's the tool I used: amzn.to/3cGKTWX
This kit comes with assorted rivnuts as well: amzn.to/2TJsnVb
Where did you get that spoiler?!
Designed and built it: th-cam.com/video/svQ8P35xny4/w-d-xo.html
Would you mind sharing where you got the mounts made. Im thinking ill weld in supports but never hurts to have a back up
I got them done as a favor from a shop that doesn't actually take outside work. But any basic machine shop that has a router table should be able to do these easily.
Ok hopefully ill find a decent shop here. But hopefully i can start the build in about 9 months. Leaves me time to hopfully write out my plan. Plan on swaping in a 2017 5.0, swapping back end and so on and doing videos on youtube to show people tips and so on. Hopefully make a little to try and make it better. Would you be ok that once i do i throw you a shout out.
Yeah man definitely, sounds like a fun build!
👍🏼👍🏼👍🏼👍🏼👍🏼👀
🙌🙌
Hi there, what paint did you use and where can we buy it? Seems perfect for a DYI. Thanks.
I use Automotivetouchup.com
@@Kordare thanks for sharing.
When I first started watching your videos,I think that I heard you say that you were an engineer. What kind are you, if you don't mind me asking?
Mechanical engineer! I work at a product development company and design a lot of plastics, sheet metal, machined parts.
@@Kordare oh cool! That sounds fun! 😁
How are you going to keep water out of everything
Where specifically? I'm fine with water going down between the new and old quarter because everything is welded back up and sealed.
What paint did you use for the fenders?
I bought it from automotivetouchup.com
#epicbadassery
🤘🤘
Where is that paint from ?
I use automotivetouchup.com
Hey I was wondering do you have a 3D printer or you order it online?
I don't have one but I use them daily at my job as an engineer
@@Kordare another question I have is what do you use to weld?
@@thefredrider I have a miller diversion 180
@@Kordare wow super expensive what would recommend for a beginner that has never welded before but wants to get into it just for his car sruff
@@thefredrider Hobart 140 mig
so he's not molding it? what a bandage of a widebody
Nah just doing it my own way
First