For those people looking for the next video about Routh-Hurwitz Criterian: Special Cases (1) Routh table sometimes will have a zero only in the first column of a row: If the first element of a row is zero, division by zero would be required to form the next row. To avoid this phenomenon, an epsilon is assigned to replace the zero i the first column. The value (epsilon) is then allowed to approach zero from either the positive og negative side, after which the signs of the entries in the first column can be determined. Choosing epsilon to be zero or negative, doesnt change anything. The result would be exactly the same.
You've really helped me with lots of grey areas and you sound great . Very polished accent and a very pleasant one.. Please make more videos on control systems. Thank you.
sir i found your explanations very helpful. i was not able to get them on my daily class basis but explantions are helping me to cope with please make video on how to solve root locus problems +chinmaya A.S.V
Yes Ahmed , The number of sign changes is the number of roots in the +ve half of the S-Plane and that means it is unstable. Thanks for the comment. I have covered this in latest videos for Routh Stabilit, with examples for all the three different cases.
SIR I AM SO HELP FULL WITH YOUR CLASSES AND I WON A GAIN MORE KNOWLEDGE SO HELP ME AND TELL HOW TO FIND "ANGLE OF DEPARTURE" AND GIVE ME TIPS TO WRITING EXTERNAL EXAM
doing it the other way around than you would do the calculation of the determinant is a bit counter-intuitive. better divide by a negative number afterwards.
+Ashish Sharma well I have seen many Western people complaining on Indian TH-camrs' channels that they found the Indian's accent weird and uncomfortable(or say, unacceptable; intolerant, you know!). So, maybe Mr Chinmaya has used a fake accent to at least convince those morons while being in a disguise of a nearly US English person. ;)
His accent though it sounds like fake to most Indian people - it is very pleasant to me. I can understand why Indian people complain when it does not resemble the typical Indian accent that is ugly to non-indians to listen to and having a hard time to put up with. He has a very polished and pleasing accent . he is really good in his accent. It may sound fake to Indian especially those who have a thick accent like hurling stones at a metal plate.
For those people looking for the next video about Routh-Hurwitz Criterian: Special Cases
(1) Routh table sometimes will have a zero only in the first column of a row:
If the first element of a row is zero, division by zero would be required to form the next row. To avoid this phenomenon, an epsilon is assigned to replace the zero i the first column. The value (epsilon) is then allowed to approach zero from either the positive og negative side, after which the signs of the entries in the first column can be determined.
Choosing epsilon to be zero or negative, doesnt change anything. The result would be exactly the same.
he must be a true engineer, coz he know we start studying only day a before the exam.😁
think again - if u did engineering in last minute - u must be super smart .
hey thats what im doing write now.tommorrows my exam
... studying an hour before the exam 😭
Did you do well? :)
You nailed the point 👉😀
I have my exam in 1 hour.
sumit barda how did it go 😂
😂😂
Noob, I have it in 7mins
same mine's in 15 mins lol
You've really helped me with lots of grey areas and you sound great . Very polished accent and a very pleasant one.. Please make more videos on control systems. Thank you.
It would be nice with links for part 2 and 3 in the description box...
i just want to say thank you ...sir
I've got fully satisfied with this video...
How do you know what the characteristic equation for the transfer function is? Is it always just the denominator, or is it more complicated than that?
thanks for making the concept easy to understand..your trick is really going to help me for my tomorrow's exam..!!:)
HOW DID HE KNOW I HAVE AN EXAM TOMORROW??
Haha... Good luck for that test :)
Good luck with your exam :)
Very Informative...I appreciate this and Thanks a ton.
Okay that was really awesome. You just saved me 2 hours of work. Thank you!
Glad it helped! You 're welcome :)
Thanks loved this. cleared lot of concepts.
Please do more videos! i enjoyed your lectures very much! ;)) thank youuuu ~~
good work done,,,,keep updating bro
thanks for this wonderful explaination!
exam tomorrow, this guy is true engineer.
Where are the next parts
If numbers of changes were 3, would it be still unstable ?
and which case is it become stable (is it if there’s no changes ? )
Thank you
Thanks for helping me cram for my controls final!
I had a doubt.What happened to the numerator?
because in some cases,numerator was added to the denominator
chinmaya please upload the rouths criterion technique for special cases
sir,to tell u the truth ur videos r lifeline to my studies dat much r they helpful and sir i request u to upload a video on Weddles’ rule thank u
what if you use a software to calculate the roots? isn't it faster?
Your explanation was awesome tnx ❤
sir i found your explanations very helpful. i was not able to get them on my daily class basis but explantions are helping me to cope with please make video on how to solve root locus problems +chinmaya A.S.V
hi sir , i have seen many of ur lectures on micro controller , network and this . i like your explainations
Thankyou :) Glad they have been helpful.
Thnkuuu so much . I was really helpful
You are very clear to me
Thanks my friend it was helpful
thank you very much for the video.
How to find left side roots
Really helpful, thanks
Excellent. Thank you.
Thank you. Hope it was helpful :)
sir, where are the other, 2 videos...
where are the other two videos?
Mrigank I couldn't find them too :(
of course i find it helpful.thank you
I am glad it was helpful :) All the best !
Where to complete videos for other cases
I have recently uploaded them. Please check out the latest videos if you still need them... All the best :)
guys for s0, u don't need to calculate for it, so just like last term of denominator which is 3 and that is your s0. A shortcut for you to know
I still dont know how to determine if the equaton has any roots in the right half of the s plane. Plz comment i have an exam in two days!
Also if you have negative on the first column, its automatically considered to be unstable .
Yes Ahmed , The number of sign changes is the number of roots in the +ve half of the S-Plane and that means it is unstable. Thanks for the comment. I have covered this in latest videos for Routh Stabilit, with examples for all the three different cases.
Really helpful. Thank you.
Thanks. I am glad it was helpful !
and I am requesting you to please upload a video regarding Laplace Transform...and then I will get satisfued just like Routh's Criterion...
ur a life saver ^^
nice video sir
thanks a lot sir....👍👍
thanks man this was very helpful
Thanks. I am glad it was helpful !
THANK YOU SO MUCH
thank u soo much sir...
Thank You ..... 😊
Thank you sir :-)
he is a boss life saver
Oh I do have exam on Feedback Control System tomorrow. Thanks
Hope it was helpful !
THANK YOU
thank you
thank you bro
Hope it was helpful :) Thank you !
thank you very much
You are welcome. Hope it was helpful :)
Thank you ❤️
Thanks. I am glad it was helpful !
Thanks
If the semester is still on, please check the new videos I have uploaded, there are all the three cases with example problems. All the best !
SIR I AM SO HELP FULL WITH YOUR CLASSES AND I WON A GAIN MORE KNOWLEDGE SO HELP ME AND TELL HOW TO FIND "ANGLE OF DEPARTURE" AND GIVE ME TIPS TO WRITING EXTERNAL EXAM
the determinant method is wrong while solving s^2 and so on.
good one
thanks
danke!
You are welcome !
thanks.
Honestly felt like I was on a flight to Amsterdam
thanks sir
Welcome :)
شكرا
doing it the other way around than you would do the calculation of the determinant is a bit counter-intuitive. better divide by a negative number afterwards.
1hr before my exam....👍
All the best :)
exam at 9o'clock this morning...
I hope it went well !
I have an exam tomorrow=)))))))))))))))))
Hope it went well :) Good luck on the results !
Well I have an exam tomorrow. :(
Hope it went well :) Good luck with the result !
I have an exam Tomorrow 😂😂 LoL so lazyy to read so I am listening to it
I hope it went well :) All the best for the coming ones !
well i have exam in 2 days;~(
you are very nice
Thank you Mike.
u are cool but ur hello everyone cracks me up ..
I am taking an exam right now..
All the very best then ;) Ace your test!
test in half an hour xD
true engineer lol
All the best :) Hope it went well !
@@ChinmayaASV it did! All thanks to you!!
man you had wrong first array is must be even
fake accent .....:(
otherwise good
+Ashish Sharma who cares about the damn accent
+Ashish Sharma well I have seen many Western people complaining on Indian TH-camrs' channels that they found the Indian's accent weird and uncomfortable(or say, unacceptable; intolerant, you know!).
So, maybe Mr Chinmaya has used a fake accent to at least convince those morons while being in a disguise of a nearly US English person. ;)
+Ashish Sharma you are such a simpleton...majoring in minors tsk tsk tsk.i really appreciated the clarity of his speech
His accent though it sounds like fake to most Indian people - it is very pleasant to me. I can understand why Indian people complain when it does not resemble the typical Indian accent that is ugly to non-indians to listen to and having a hard time to put up with. He has a very polished and pleasing accent . he is really good in his accent. It may sound fake to Indian especially those who have a thick accent like hurling stones at a metal plate.
thank you
Hope it was helpful :) Thank you !
Thanks
Fabian Cerda You’re welcome :) Hope it helped!