Hello, I have the G019 and I was wondering if you fill yours up like mine. You can basically add the entire detergent left biting corner and it will disperse it as needed according to loads etc. help!!!!
I'm not sure I understand the instructions correctly. It says for deep fill press and it adds water incrementally. It says hold for 3 seconds for max fill. Do I do one THEN the other? If I want max fill does the light need to be off then hold down til it turns on? It takes longer than 3 seconds. I'm confused on mine. I have this model.
For deep fill you just push it and you should hear a tone. This can be done with the light off for the Deep fill option. For Max deep fill this can be done by pressing and holding it's more like 5 Seconds you should hear two tones to indicate that it is set for Max. This can be done either with the light off for deep fill or if you have started deep fill and want to get to Max fill pressing and holding for 5 seconds will get you to Max fill.
Hello I just got a new washer this same model that is in your video but I really don’t know how to use deep fill I got it on normal wash but it don’t get to much water how can I do it please answer if you can thanks.
The Deep fill option is not available on all wash types. The ones that I tend to use the most are the white setting and towels. Those both have deep fill and Max deep fill options.
@@gussa89tovar8 If I recall correctly the main diff between a lot of the settings is temp, soak, ect. All of which can be changed to meet what you would like to do. I use the white as my starting point because it has the option for deep fill.
It helps if you keep the clothing around the outer portion Of the tub For balancing . If it does not look like enough water you can always press the Deep fill option .
Wanderer001 okay! I have a big comforter that didn’t fit in my old washer. I just got this washer the other day. Have y’all tried to wash large comforters? I hear the washers with no agitator you can.
I have used it with big comforters you can have it sit in the middle but it is a good idea to try and even out the comforter along the outer edge to keep it from going off balance .
@@Wanderer001_Reviews In the correct tray but i think it's just the hard water. I'm just gonna look for some friendly "Hard water" softener. Thanks for the quick reply! Take care.
Max deep fill option can be turned on by pressing and holding the Deep fill button you should hear two distinct chimes. However this option is not available on all choices of wash type.
Wanderer : Can you tell me exactly where each dial must be set, to get the max tub fill and how full will the tub get? The GE MANUAL is very weak and vague. And their customer service center is the same.
What do you mean by 3 different fill types? How do you set to Max Fill versus Deep fill? And how far to the top should the water level get ? Most we get is approximately 2/3 full.And the only setting that seems to respond to holding the Deep fill button down for 3 seconds is the Bulky Setting ? Is this how it works?
Pressing and holding the Deep fill option For 3 seconds will give you Max deep fill . So you can either do none Deep fill Or Max Deep fill by holding .
Tengo una igual a la del video, pero no me lava con poca ropa prácticamente tengo que sobre cargarla para que me lave de lo contrario general un golpe en la parte de abajo ayuda!
Cuando dices que tienes que cargarlo de más ¿cuánto le pusiste que no estaba lavando? Tiendo a hacer un montón de oscuros y un montón de blancos a la vez, así que nunca tuve una carga muy pequeña.
Le normal con los jeans pongo 5 a que lave pero aun no me funciona y me dice un amigo que probablemente el sensor este fallando porque cuando ya esta por lavar aveces me tira el agua y no enciende
@@GuadalupeGamez-n2i Sí, parece que hay un problema. La lavadora no debe abrir el agua hasta que la puerta esté cerrada y bloqueada. Quizás quieras que lo revisen.
![[Part 1] รักมาไม่ทันตั้งตัว❤ หนุ่มสาวโสดถูกจับมาแต่งงานกันกะทันหัน แถมเธอยังเป็นหัวหน้าของเขา?!](http://i.ytimg.com/vi/y2pOOMkuFI0/mqdefault.jpg)
![🔴 ฟุตบอลแชมป์กีฬา 7HD แชมเปียน คัพ 2024 [รอบ 8 ทีมสุดท้าย] - ช่วงบ่าย](http://i.ytimg.com/vi/M0S_ReCIkxg/mqdefault.jpg)
I am glad that I found this video this is the second video I have seen of yours of the washer machine review. Thank you.
Happy that they are usefull.
Back when these machines are awesome!
What do you do when the fabric softener is not being pulled in I’ve taken the tray out cleaned it put it back in and it still doesn’t seem to work.
I have not run into this issue myself, so sadly I don't have any words of wisdom to pass on.
Hello, I have the G019 and I was wondering if you fill yours up like mine. You can basically add the entire detergent left biting corner and it will disperse it as needed according to loads etc. help!!!!
This washer does a load by load for detergent. It does not have the option to dispense over time.
So if I want to wash my big blanket what should I press? I barely got the new washer same as yours
Bulky. This is the setting for things like that.
I'm not sure I understand the instructions correctly. It says for deep fill press and it adds water incrementally. It says hold for 3 seconds for max fill. Do I do one THEN the other? If I want max fill does the light need to be off then hold down til it turns on? It takes longer than 3 seconds. I'm confused on mine. I have this model.
For deep fill you just push it and you should hear a tone. This can be done with the light off for the Deep fill option. For Max deep fill this can be done by pressing and holding it's more like 5 Seconds you should hear two tones to indicate that it is set for Max. This can be done either with the light off for deep fill or if you have started deep fill and want to get to Max fill pressing and holding for 5 seconds will get you to Max fill.
@@Wanderer001_Reviews I really appreciate your reply!
Do I put the detergent pods inside the washer first with the clothes then let it fill up?
Yes just like you would with a regular washer.
Hello I just got a new washer this same model that is in your video but I really don’t know how to use deep fill I got it on normal wash but it don’t get to much water how can I do it please answer if you can thanks.
The Deep fill option is not available on all wash types. The ones that I tend to use the most are the white setting and towels. Those both have deep fill and Max deep fill options.
Wanderer001 and what if I have a lot of clothes to wash does the washer detect that there is lot of clothes in it ?
Wanderer001 and if I choose the white wash option no matter if I have different type of colors ?
@@gussa89tovar8 It will do a scene balance run at the start to try and figure out how many cloths you have in it.
@@gussa89tovar8 If I recall correctly the main diff between a lot of the settings is temp, soak, ect. All of which can be changed to meet what you would like to do. I use the white as my starting point because it has the option for deep fill.
Do you have to keep the center clear from clothes? And can you add more water if you see it’s not enough for that load?
It helps if you keep the clothing around the outer portion Of the tub For balancing . If it does not look like enough water you can always press the Deep fill option .
Wanderer001 okay! I have a big comforter that didn’t fit in my old washer. I just got this washer the other day. Have y’all tried to wash large comforters? I hear the washers with no agitator you can.
I have used it with big comforters you can have it sit in the middle but it is a good idea to try and even out the comforter along the outer edge to keep it from going off balance .
Wanderer001 thank you so much for all your help and the quick response!
How do you remove the filter to clean out left over fabric softener? My water is hard and the fabric softener turns to mush all over my clothes.
Where are you adding the fabric softener to? The tray up top just sits there and dispenses as water passes through it.
@@Wanderer001_Reviews In the correct tray but i think it's just the hard water. I'm just gonna look for some friendly "Hard water" softener. Thanks for the quick reply! Take care.
How do you get the max deep fill option? I inherited this washer and dryer with my new house...
Max deep fill option can be turned on by pressing and holding the Deep fill button you should hear two distinct chimes. However this option is not available on all choices of wash type.
@@Wanderer001_Reviews thank you very much! I found it
@@Wanderer001_Reviews thanks for answering this question. I always felt like this machine didn't add much water for large loads.
Wanderer : Can you tell me exactly where each dial must be set, to get the max tub fill and how full will the tub get? The GE MANUAL is very weak and vague. And their customer service center is the same.
Towels and sheets Whites Casuals Delicate Activewear Cold wash Speedwash Jeans Heavy duty and bulky is on by default
The water pressure on yours comes out a lot more than mine, could it be that the landlord is controlling the pressure of the water?
There is no dial that controls the amount of water that comes out of the washer. Might have something to do with water supple.
Where do you put the detergent? And what if I use tide pods, where do you place those?
There is a a tray to use for detergent. th-cam.com/video/Ew7OorpPWKY/w-d-xo.html pods you are just supposed to place on the load.
Hey I was wondering how do you set it to max deep fill?
On supported cycles you will press and hold the deep fill option until you hear a second set of chimes.
@@Wanderer001_Reviews where it says my cycle or just hold down deep fill for a few seconds until I hear the second or third chimes? Sorry 😕
You select like colors then press and hold deep fill until you hear a second chime.
@@Wanderer001_Reviews oh ok 😄 thank you so much 😉
@@Wanderer001_Reviews is this a quiet machine or is it loud when it's spinning
When filling mine with cold why does it switch to hot and back to cold?
Do you have it on tap cold or one of the other cold options?
@@Wanderer001_Reviews cold
@@amandab4823 Anything other then tap cold will get a little hit of hot water.
@@Wanderer001_Reviews ok thank you.
My wife had to have one of these new systems, I hate it, load around the outer edge, :(
What is a sen51n9 code ,or sens1n9 code mean
If you are seeing it at the start of a load that is the auto balancing code. It is normal.
How can you soak your laundry?
There is a button on the panel called auto soak.
Mine does not fill that fast
Part of that could be water pressure in your home.
Over 10 mins to fill something wrong there?
The video show the three different fill types: regular, deep, and max fill. That is why it is over 10mins long. Max deep fill only take 6min.
What do you mean by 3 different fill types? How do you set to Max Fill versus Deep fill? And how far to the top should the water level get ? Most we get is approximately 2/3 full.And the only setting that seems to respond to holding the Deep fill button down for 3 seconds is the Bulky Setting ? Is this how it works?
Pressing and holding the Deep fill option For 3 seconds will give you Max deep fill . So you can either do none Deep fill Or Max Deep fill by holding .
Thanks for your reply. So if the tub fills to about 2/3 from the top , that is the most we can expect it to fill?
Yes
Tengo una igual a la del video, pero no me lava con poca ropa prácticamente tengo que sobre cargarla para que me lave de lo contrario general un golpe en la parte de abajo ayuda!
Cuando dices que tienes que cargarlo de más ¿cuánto le pusiste que no estaba lavando? Tiendo a hacer un montón de oscuros y un montón de blancos a la vez, así que nunca tuve una carga muy pequeña.
Le normal con los jeans pongo 5 a que lave pero aun no me funciona y me dice un amigo que probablemente el sensor este fallando porque cuando ya esta por lavar aveces me tira el agua y no enciende
@@GuadalupeGamez-n2i Sí, parece que hay un problema. La lavadora no debe abrir el agua hasta que la puerta esté cerrada y bloqueada. Quizás quieras que lo revisen.
Video is green I can't see the video
Might be your device. Video looks fine.
we just seen one at lowes
I have this machine nothing but problems