This is some quality video. Really knowledgeable channel. Someone sponsor this bloke and get him going on big stuff. But take that shelf down or he'll lose too many brain cells.
@@stuff7853 From someone that is self taught, via all of the mistakes along the way, you make the right points at the right time - there's a lot of wisdom in your videos - congrats
Hey mate, i have just finished converting my na to turbo running gear. All I can say is I wish I seen your videos 12 months ago! 😅 Very very informative in-depth videos by a level headed sensible fella, even though I have finished the conversion I still watched all your na.t conversion videos and appreciate the time and effort in documenting while building ! It's a shame you didn't continue creating content related to the xr (mods/tune and review and maybe getting around to putting a set of rods and pistons in it) Possible revival ??
Thanks for the kind words mate! how is yours all running? To give an update on the car quiet a lot has happened since these videos were filmed. I converted it to a 6 speed manual and its now running just shy of 350rwkw on 14psi. I found that by the time i was doing those mods to the car youtube had become so saturated with 1000hp barra builds that it seemed there was little desire for content like mine anymore where as when i started there was very little content on conversions. I haven't really got any car projects going at the moment but if i end up doing anything unique again that i feel will help people if i upload it'll appear!
Your legit the only guy ive found on youtube that has done a video on swapping a turbo motor in na im doing the same and should be done soon in the shop hoping to make 350/400kw how much did you make ?
Excellent presentation however using the old timing chain and guides is not prudent. In fact given the condition of the ports I would have removed the cylinder head and taken it in for a service and crack test, installing a new head gasket. Second hand Cams are not going to mate up with the lifters so lots of things going on here!
Thanks for the comment. I agree reusing chains and guides is not the best practice however i've seen barra's with over 800,000ks on them still running the original chain and guides and they have been fine. These ones had so little wear you couldn't even catch your nail in the groove, on a high power high dollar build however i would strongly advise against it. As for the cylinder head and cams. In the video uploaded after this one the entire engine was stripped down and taken to a machine shop before i rebuilt it. Barra cams run on rollers that actuate the valves. Theres nothing wrong with running second hand cams in these engines at all as the cams never mate to the lifters as they would in an engine where the lifters ride directly on the cam such as in many pushrod v8's.
ive got a crashed fg turbo ute and an fg na sedan. some people have said that there could be wiring issues when you swap over the ecu and gearbox as i plan to do an entire turbo swap into the na just wanted to know if anyone ran into the same problems.
Awesome video man I'm building a ba up aswell its actually in really good condition. I'm doing pump gears valve spring and headstuds. Would you recommend doing pistons and rods etc if ya only chasing 300kw or so I have been told the ba have a weak rod
Ba's have weak rods but 300kw is safe with them with the correct supporting mods and a good tune. They can take a little more then that even, from what im told below 350kw is ok. But if you have the spare money rods is a good idea so you have a more durable engine that can handle abuse better. You have to factor into the cost getting the rotating assembly balanced if you change the rods though. Stock pistons are fine with 300kw. I didn't show it in the video but one of the pistons in this engine was damaged from foreign matter in the engine. I bought a new one from ford and it was the exact some part number ba-fg. I got lucky and it weighed exactly the same as the old one so i got away with just putting it in.
@@stuff7853 wow cheers mate I'm weighing up the options atm as engine is out but not chasing huge power as in a xb ute that currently handles like a bath tub but wile motors out sump and heads off it makes me think..... plus it has a btr up its arse but i know if I dont do it now I never will
@@ryanhughes7178 I often wish i had have done it with mine just for the peace of mind. But with the limitations of the btr i decided it wasn't really worth it because i never plan to take the car to that next level of power
With Btr’s you just have to make them shift harder . You can do this via pcmtech and the s5 global temps . Try -200 oil temps in all of the fields . Also can turn the s 5 solenoid torx screw in a full turn or more and will do the same thing .
number 6* good spot. The engine had ingested something and pitted the top of that piston. It was minimal and i probably could have ran it but my parts guy at ford sourced me a new genuine one for cheap. I weight matched it to the original and installed it just to be safe. The other 5 all measured well within tolerance and had no damage. Valve did have an 0 stamped on it, just covered in crud. Machine shop took care of that.
Ran a ppsr check on it before i bought it. Clear title but definitely from a neglected wreck. All part of the standard used falcon parts experience haha
This is some quality video. Really knowledgeable channel. Someone sponsor this bloke and get him going on big stuff. But take that shelf down or he'll lose too many brain cells.
I've had two more run ins with that shelf. I think it needs to go haha
Was about to comment the same thing bro I have an fg and a ba and need to start learning about Barra terdowns so this is really help full
You are an excellent teacher, like one of the best I have seen
Thanks! means a lot
@@stuff7853 From someone that is self taught, via all of the mistakes along the way, you make the right points at the right time - there's a lot of wisdom in your videos - congrats
thanks for sharing. its really interesting
Thanks mate appreciate it
thanks heaps for doing the videos
Great video, really well put together. You've got a new sub.👍
Thanks mate, Appreciate it!
Great video. Thanks, keep them coming
Awesome explanation very informative 👍
Excellent video
Hey mate, i have just finished converting my na to turbo running gear.
All I can say is I wish I seen your videos 12 months ago! 😅
Very very informative in-depth videos by a level headed sensible fella, even though I have finished the conversion I still watched all your na.t conversion videos and appreciate the time and effort in documenting while building !
It's a shame you didn't continue creating content related to the xr (mods/tune and review and maybe getting around to putting a set of rods and pistons in it)
Possible revival ??
Thanks for the kind words mate! how is yours all running? To give an update on the car quiet a lot has happened since these videos were filmed. I converted it to a 6 speed manual and its now running just shy of 350rwkw on 14psi.
I found that by the time i was doing those mods to the car youtube had become so saturated with 1000hp barra builds that it seemed there was little desire for content like mine anymore where as when i started there was very little content on conversions. I haven't really got any car projects going at the moment but if i end up doing anything unique again that i feel will help people if i upload it'll appear!
Sick channel!!!!
Haha love the shelf mate we have shit incommon
Thanks mate! That shelf has attacked me more then once!
10:07 or you can use rope and turn the crank so the piston pushes the rope against the valves to hold them, it worked well on my Honda B series
The rope trick works well on a lot of engines as well
Thankyou so much
Your legit the only guy ive found on youtube that has done a video on swapping a turbo motor in na im doing the same and should be done soon in the shop hoping to make 350/400kw how much did you make ?
Just subbed , by the way .
Excellent presentation however using the old timing chain and guides is not prudent. In fact given the condition of the ports I would have removed the cylinder head and taken it in for a service and crack test, installing a new head gasket. Second hand Cams are not going to mate up with the lifters so lots of things going on here!
Thanks for the comment. I agree reusing chains and guides is not the best practice however i've seen barra's with over 800,000ks on them still running the original chain and guides and they have been fine. These ones had so little wear you couldn't even catch your nail in the groove, on a high power high dollar build however i would strongly advise against it. As for the cylinder head and cams. In the video uploaded after this one the entire engine was stripped down and taken to a machine shop before i rebuilt it. Barra cams run on rollers that actuate the valves. Theres nothing wrong with running second hand cams in these engines at all as the cams never mate to the lifters as they would in an engine where the lifters ride directly on the cam such as in many pushrod v8's.
@@stuff7853 Agreed roller lifter doesn't matter. Keep up the great presentations
ive got a crashed fg turbo ute and an fg na sedan. some people have said that there could be wiring issues when you swap over the ecu and gearbox as i plan to do an entire turbo swap into the na
just wanted to know if anyone ran into the same problems.
Great stuff , are you able to tell me if the engine mount bolt pattern on a Barra is the same as the earlier single cam 4 litre ?
I can't speak for E series but i have bolted AU engine mounts to a barra when fitting one to an AU and they fit perfectly hope that helps
It is
Awesome video man I'm building a ba up aswell its actually in really good condition. I'm doing pump gears valve spring and headstuds. Would you recommend doing pistons and rods etc if ya only chasing 300kw or so I have been told the ba have a weak rod
Ba's have weak rods but 300kw is safe with them with the correct supporting mods and a good tune. They can take a little more then that even, from what im told below 350kw is ok. But if you have the spare money rods is a good idea so you have a more durable engine that can handle abuse better. You have to factor into the cost getting the rotating assembly balanced if you change the rods though. Stock pistons are fine with 300kw. I didn't show it in the video but one of the pistons in this engine was damaged from foreign matter in the engine. I bought a new one from ford and it was the exact some part number ba-fg. I got lucky and it weighed exactly the same as the old one so i got away with just putting it in.
@@stuff7853 wow cheers mate I'm weighing up the options atm as engine is out but not chasing huge power as in a xb ute that currently handles like a bath tub but wile motors out sump and heads off it makes me think..... plus it has a btr up its arse but i know if I dont do it now I never will
@@ryanhughes7178 I often wish i had have done it with mine just for the peace of mind. But with the limitations of the btr i decided it wasn't really worth it because i never plan to take the car to that next level of power
With Btr’s you just have to make them shift harder . You can do this via pcmtech and the s5 global temps . Try -200 oil temps in all of the fields . Also can turn the s 5 solenoid torx screw in a full turn or more and will do the same thing .
Im very interested, i have NA FGX ))
Lmfaooo the start
Why is No1 piston brand new ? I also do not see a 0 on the No 1 Exhaust valve that looks suspect .
number 6* good spot. The engine had ingested something and pitted the top of that piston. It was minimal and i probably could have ran it but my parts guy at ford sourced me a new genuine one for cheap. I weight matched it to the original and installed it just to be safe. The other 5 all measured well within tolerance and had no damage. Valve did have an 0 stamped on it, just covered in crud. Machine shop took care of that.
Inside the engine is very varnished up.
Yeah it was pretty dirty. It definitely had been neglected badly in its previous life.
Forty four !!
Throwing a barra off the tower?
poor barra shes been abused something fierce.
It was in a very sad way when i got it!
lock tite helie in ...alumimin exspands
Purchased engine from some bone head, probably came out of a written off stolen vehicle. Oh well.....full rebuild.
Ran a ppsr check on it before i bought it. Clear title but definitely from a neglected wreck. All part of the standard used falcon parts experience haha