I have this exact tool I was about to replace as I couldn’t figure out how to reassemble. This was extremely helpful. Thank you! And thank you for adding the last section, the most critical imo.
Thank you, sir! I have this same rivet gun and had a stuck rivet. I was figuring out how to get the 3 "grabbers" correctly back into the cone piece. Your video had me back up and running in a matter of minutes. Thanks again!!
perfect video. took mine apart,spring went flying and 30 minutes later I was still trying to get the order to reassemble, then I found you. all better now. two thumbs up.
Great demonstration. I couldn't figure out that the 3 grippers had to go through the hole before screwing the black cup on. I never even thought to use a magnet. I was about to throw it out before watching this. Thanks for saving me $30 bucks and making the video.
GREAT tutorial!! I was only looking for a parts manual when I came across your video. I also had the stuck 1/4" rivet. I thought I had lost one of the grippers when taking mine apart, but you showed there only were 3 and that was what I had. All is back together again. Thanks for taking the time to post the video.
Thanks for the reminder. It took me ages the first time to figure out the two black pieces of the shaft separated. This time I just looked up your video.
not2fast4u2c I was using the 1/4 inch rivet size on the 1/4 inch rivets and for some reason the rivets just kept getting stuck. Any idea why? When I would look inside the tool, the 3 prongs weren't opening up wide enough to allow the end to go all the way down. Is it my tool?
I really don't know ...The rivet should slide all the way in and not be tight...When using any rivets I will squeeze the handles 1/2 way then open them up again and push the tool back tight again to the rivet to take a second bite
not2fast4u2c When I first insert the rivet, it wont go beyond the teeth unless I force the rivet inside. I believe it may be my tool. I'm going to head on over to see if Harbor Freight has a tool that won't do that.
Thank you, I used this video to reassemble after removing a stuck rivet stem from a steel rivet It was really jammed in there, the insides unscrewed just taking the tip nozzle out
some of the areas I will be using the 1/4 rivet gun don't have enough clearance for the handle. Have you pr someone used the Hydraulic one from HF? how was it? btw- great video. Thank you for sharing.
I have never used a power one....I do like this one ...It is easier on the hands and does 1/4 in. rivets I fixed 2 old snow shovels and it worked great
The tool cost was $20 but I used a 20% coupon ...The rivets are $ 7 for a box of 100 ..I am thinking of a no weld project ...This tool is so much easier to use than the small ones which hurt my hands
![[TH] 2024 PMWC x EWC Group Stage Day 3 | PUBG MOBILE WORLD CUP x ESPORTS WORLD CUP](http://i.ytimg.com/vi/VnOqutfqWqU/mqdefault.jpg)
I am 65 years old I have never had a rivet gun I really like your video finally went to Harbor Freight and got one just like that👍👍👍👍👍👍
This is a Great tool for 1/4 inch rivets I restored my little red wagon and used rivets instead of bolts
I have this exact tool I was about to replace as I couldn’t figure out how to reassemble. This was extremely helpful. Thank you! And thank you for adding the last section, the most critical imo.
Glad I could help THANKS for watching
Thank you so much I've been playing with the 3 fingers for the last hour and I had tried them backwards.
Thank you, sir! I have this same rivet gun and had a stuck rivet. I was figuring out how to get the 3 "grabbers" correctly back into the cone piece. Your video had me back up and running in a matter of minutes. Thanks again!!
Glad my video helped you..Thanks fir watching
Great video...I knew had to be a simple procedure, but watching you reassemble the tool was just the key to a quick fix. Many thanks!
perfect video. took mine apart,spring went flying and 30 minutes later I was still trying to get the order to reassemble, then I found you. all better now. two thumbs up.
Glad I could help ...Thanks for Watching
Great demonstration. I couldn't figure out that the 3 grippers had to go through the hole before screwing the black cup on. I never even thought to use a magnet. I was about to throw it out before watching this. Thanks for saving me $30 bucks and making the video.
THANKS for watching
GREAT tutorial!! I was only looking for a parts manual when I came
across your video. I also had the stuck 1/4" rivet. I thought I had
lost one of the grippers when taking mine apart, but you showed there
only were 3 and that was what I had. All is back together again.
Thanks for taking the time to post the video.
Thanks....This is a great tool for 1/4 in. rivets and it is easy on the hands to use on any size ...Thanks for Watching !!!
Thanks !!! i had to order the jaws 1 was broken and it's been months you got me back to home base ...Thanks !!!
Glad My video helped
I have the exact rivet tool as yours, sold as a Dorman 743-100 on Amazon. Thanks for your video tutorial, helped me immensely
Glad the video helped..Thanks for Watching !!!
Thanks for the reminder. It took me ages the first time to figure out the two black pieces of the shaft separated. This time I just looked up your video.
Thanks for watching
Life saver, that's what you are.
Glad I could help THANKS for watching
Thanks, I just needed to figure out the 3 small pieces. They fell out and I couldn't get em back in
This video helped me thank you sir
Glad I could help thanks for watching
Had this happen to me last night. Basically fixed it just like you did.
Great rivet gun, especially for the price!
I really like this tool because I can use 1/4 inch Dia.rivets ..The 2 snow shovels I repaired Are as good as a new
Thanks you just saved me today I thought I had broken it somehow. 10 Min later we were back in business and project is complete ^_^
Glad I could help...Thanks for watching
Great video! Right on time for the fix I needed. Thank you!
Thanks for watching
Very clear demonstration. I just took out the stuck rivet and it was very easy because of the very well done tutorial.
Thanks for Watching ..I used mine a few days ago to put rivets in my new stove pipe
Thanks! I decided to work without the plastic receptacle in the future to make sure, I won't end up with FIVE rivets stuck again.
Glad I could help
Just bought it and the rivet got stuck on the first go. Very informative.
I stuck a rivet because I picked the wrong size piece ...It is a great tool for using the big 1/4 rivets
not2fast4u2c I was using the 1/4 inch rivet size on the 1/4 inch rivets and for some reason the rivets just kept getting stuck. Any idea why? When I would look inside the tool, the 3 prongs weren't opening up wide enough to allow the end to go all the way down. Is it my tool?
I really don't know ...The rivet should slide all the way in and not be tight...When using any rivets I will squeeze the handles 1/2 way then open them up again and push the tool back tight again to the rivet to take a second bite
not2fast4u2c When I first insert the rivet, it wont go beyond the teeth unless I force the rivet inside. I believe it may be my tool. I'm going to head on over to see if Harbor Freight has a tool that won't do that.
not2fast4u2c Just got a new one and it works great! I guess I got a dud, thank you for your time!
Thank you, I used this video to reassemble after removing a stuck rivet stem from a steel rivet
It was really jammed in there, the insides unscrewed just taking the tip nozzle out
You are Welcome Thanks for watching
I like that rivet gun cause of the bottle that collects the rivet end.
I like it to it keeps the pieces from falling out on the floor
Thanks 👍🏾
helped alot thanks
Thanks for watching
Good stuff Bud!!☺
Thanks ....I like this tool I have repaired 2 snow shovels with it
How about putting it together???
That is a nice big rivit tool.
Thanks !!! It works well with the 1/4 inch rivets
some of the areas I will be using the 1/4 rivet gun don't have enough clearance for the handle. Have you pr someone used the Hydraulic one from HF? how was it? btw- great video. Thank you for sharing.
I have never used a power one....I do like this one ...It is easier on the hands and does 1/4 in. rivets I fixed 2 old snow shovels and it worked great
Wow 1/4 inch. Hmmm...what's it cost and rivets? How many rivets per box. I have 25 year old project in mind I may do someday if health allows it.
The tool cost was $20 but I used a 20% coupon ...The rivets are $ 7 for a box of 100 ..I am thinking of a no weld project ...This tool is so much easier to use than the small ones which hurt my hands
Very first rivet got stuck, took it apart and the spring-loaded jaws flew apart, parts diagram worthless to re-assemble.
Hope my video helped
@@not2fast4u2c Yep, got it back together and working!