I have Gigabyte H55M-USB3 same mobo with x3440 cpu and when my windows launches it just restarts at 3:36 and stuck at loading icon ? Is this because of mobo or rams ?
@@clockbench I figured it out its Load Line Calibration. I disabled it and its everything working fine. Now im at 4ghz,1.35vcore ,auto DIMM voltage. Im using AIDA as a stress test it passed 5min mark and i dont have any crashes after oc.
Hi, very cool video mate, I just picked up a GIGABYTE Motherboard GA-P55-UD4 with an Xeon X3430 and Coolermaster twin fan cooler, from Ebay, for around $130.00 , I will try overclocking using your method and let you know how it goes, I'm also looking out to get a X3450 , I see them for around $40 at the moment on Ebay, so much cheaper then the old I7's that are still way too expensive. Thanks for the Video, I Subbed too since your an Ausse! :)
I've overclocked my Xeon x3450 with the same settings and it reaches 72degrees at the first minute of stress testing with a Hyper 212xCPU cooler, which is quite a bit unfortunate since the safe temps for the CPU is 71-72 degrees max according to the manufacturers website.
Just picked up one of these bad boys on Aliexpress to replace the i5 750 which is slowly dying on me. The 750 is runnings 4GHz @ 1.35V. I'm hoping I could get the same on the X3450. PS. If you boost the VTT and PLL a couple of notches and push that base clock up to 200mhz, you'll get a more stable overclock memory wise which dramatically helps, just use a smaller multiplier to keep up with the cooling. If I don't forget, I'll drop back here to post my results. PSS. the mobo I've got is the GB P55A-UD3. Pretty excited for it. PSSS. Are you Aussie, mate?
Igor Rebenko I had mine running at 4ghz at 1.3265v with 20x multiplier and 200 bclk memory running at 1600mhz. Bumped uo VTT and PLL a bit. Temps maxed at 68c during 4 hour aida64 stress test. Unfortunately it locked up during a Heaven benchmark run when I was overclocking my hd 7870 and now I can't get any overclock on the CPU or memory to boot past bios. Only defaults. Been at it for an hour or so. Will try again later.
BloodDjimon614 You PSU maybe running out of steam. At 4GHz the CPU pulls almost 300W. I'm currently running 3.6GHz (200blck) as a 24/7 setup with 1.25V.
I have an old GA-H55M-UD2H motherboard and I have just ordered X3450 CPU for $28. So I going give overclocking a go with this xeon cpu on the Gigabyte motherboard. Thanks for inspiration. Are you on air or liquid cooling?
Have u tried looking in bios for settings called like "Ai Tuner" / "Ai Tweaker" next to the Main settings page? Edit: I looked to the board page and seems it was sold only to Brasil region and further looking into documentation it doesn't have Ai Tweaker function, only "Advanced" where u can config your CPU to limited options like enable C1E/EIST or similar, nothing about more advanced settings to bump up cpu/memory performance. In short - your motherboard is the problem - kinda like board for OEM PC's... the simpliest P7H55 without M or M-PRO can do a lot - i have P7H55 personally (EU region) and my X3430 bumped up to 3.8GHz (19x200MHz) cheers m8, hope i helped you
Bro I have a question , I have the exact same motherboard as you GA-H55M-USB3 REV2.0 I've just built my new build and it seems I'm not getting any power to the motherboard , have you had any issues with this mobo and power issues ?
hey i have same bios and same processor so my bios doesent enable only half off ram and the computer freeze randombly like when its freeze its display but cant do anything plz help bios settings
Currently i have a i5 760 at 3.6ghz at stock voltage....would be possible to have this speed at stock voltage with a x3440? I want to trade it for the extra threads
I think so. They overclock really well. Only one way to really find out is to try it. Every cpu is different, so it may or may not make your target speed. Luck is a big part of overclocking.
Hi guys! I have this x3450 and gigabyte 4slots ram. Im not sure why does my system unit temp goes high, i already applied a thermal paste, using a stock cooler, has 80mm and 120mm casefan. Any help would be appreciated, thanks!
Hi Guys Need Help GA-H55M-USB3 motherboard if change to i7 870 and to window 10 still need to update bios? or just format like normal no need to change any or update bios?
HI! Need help, i have a GA-H55M-D2H and i make OC in this same processor but when i upload the frecuency my pc not started correctly, not loading windows, or totally no work. I must put the default settings on my bios and now work normally but i want up my frecuency in this processor, anyone can help me? sorry for my vocabulary, im spanish. Greetings.
Hello CLOCK BENCH and to all who watch this video I have a very important question please I wait for your comments, with this xenon x3450 processor at speeds of 4.0, 4.1 or 4.2 mhz which would be the maximum graphics card that could be put having the smallest neck of bottle, I think a gtx 970 or 980 of 4gb or even a gtx 1060 of 6gb, please derive what you think would be the maximum gpu well approved by this processor, thank you very much
Doesn't really matter man. You'll have cpu temp issues before the motherboard becomes a problem. Just get the best cooler you can afford. D14 or D15 are about the best you can get.
Hi man, İ have X3470 and Asus P7H55M-LX i can overclock this CPU? and you have normal bios or mod bios? and my bios drivers for Windows 8.1 i can install Windows 10? Thanks for now men.
Heya mate, Well the P7H looks like a really budget board so probably fairly limited. I have not personally used that motherboard so can't really say other than to give it a shot! As for Win 10, absolutely. Just install it & you should be good to go.
Hey,i have xeon x3440 and im having trouble getting the cpu above 4GHz.when i set it to 4.1/4.2 it just doesn't want to boot,my mobo is asrock p55 pro with the latest bios
Clock Bench i have 2 different ram,team elite and team elite +.the team elite one can reach 2133mhz but the team elite + dont,so ill try to just put the team elite ram in and see what happend
Well, you wont be running the ram at those speeds on 1156 platform that's for sure. Put the ram on the lowest multi (slowest) to eliminate ram issue & see how you go.
Hey pal love your video and you simple style of explaining! I bought a GA H55M UD2H board and a scythe katana 4 cooler. What do you think about the katana 4? My oc goal was around 3,6-3,8 GHz do you think the katana can handle it? Would love to hear your thoughts.
I have Gigabyte H55M-USB3 same mobo with x3440 cpu and when my windows launches it just restarts at 3:36 and stuck at loading icon ? Is this because of mobo or rams ?
Could be anything really.
@@clockbench I figured it out its Load Line Calibration.
I disabled it and its everything working fine. Now im at 4ghz,1.35vcore ,auto DIMM voltage.
Im using AIDA as a stress test it passed 5min mark and i dont have any crashes after oc.
Hi, very cool video mate, I just picked up a GIGABYTE Motherboard GA-P55-UD4 with an Xeon X3430 and Coolermaster twin fan cooler, from Ebay, for around $130.00 , I will try overclocking using your method and let you know how it goes, I'm also looking out to get a X3450 , I see them for around $40 at the moment on Ebay, so much cheaper then the old I7's that are still way too expensive. Thanks for the Video, I Subbed too since your an Ausse! :)
Sweet pickup bud. That kit should clock well. & last for many years to come !
Do this board can support X3470,
Official website only lists x3450 and x3480 as supported processor.
Yep, will still work.
@@clockbench Can you over clock similarly with the x3470 on this mobo?
hi. does the asus P7H55-M LE support overclocking?
I've overclocked my Xeon x3450 with the same settings and it reaches 72degrees at the first minute of stress testing with a Hyper 212xCPU cooler, which is quite a bit unfortunate since the safe temps for the CPU is 71-72 degrees max according to the manufacturers website.
Did you fix the voltage or leave it on Auto ?
Is it wrong to leave it on Auto?
@@Keep163 auto usually overbolts like hell
Exactly the same mobo and cpu but the mobo doesn’t allow me to increase more then 158 of BCLK
Not sure but try updating bios, may unlock more options in bios.
Thank you for the video! Can you tell me if Windows 10 will work on the Gigabyte GA-H55N-USB3 (rev 1.0) Mini ITX motherboard?
Sorry,where is the overlocking to 4,2 GHz? You have adjustet CPU frequency Only to 3,7
Just picked up one of these bad boys on Aliexpress to replace the i5 750 which is slowly dying on me. The 750 is runnings 4GHz @ 1.35V. I'm hoping I could get the same on the X3450. PS. If you boost the VTT and PLL a couple of notches and push that base clock up to 200mhz, you'll get a more stable overclock memory wise which dramatically helps, just use a smaller multiplier to keep up with the cooling. If I don't forget, I'll drop back here to post my results. PSS. the mobo I've got is the GB P55A-UD3. Pretty excited for it.
PSSS. Are you Aussie, mate?
It's temps which are holding me back, not MHz.
Clock Bench yeah, I know what you mean, man. I'm running mine at 3.75GHz (178 blck @ 1.375V). It can do 4 but the temps get pretty scary.
Igor Rebenko I had mine running at 4ghz at 1.3265v with 20x multiplier and 200 bclk memory running at 1600mhz. Bumped uo VTT and PLL a bit. Temps maxed at 68c during 4 hour aida64 stress test. Unfortunately it locked up during a Heaven benchmark run when I was overclocking my hd 7870 and now I can't get any overclock on the CPU or memory to boot past bios. Only defaults. Been at it for an hour or so. Will try again later.
BloodDjimon614 You PSU maybe running out of steam. At 4GHz the CPU pulls almost 300W. I'm currently running 3.6GHz (200blck) as a 24/7 setup with 1.25V.
Igor Rebenko 1300w 80 plus platinum
I have an old GA-H55M-UD2H motherboard and I have just ordered X3450 CPU for $28. So I going give overclocking a go with this xeon cpu on the Gigabyte motherboard. Thanks for inspiration. Are you on air or liquid cooling?
Good stuff. They are great fun to overclock the 1156 platform. I'm on old TRU120 air cooler.
Cheers
I have this board and i just bought a xeon x3470, will this motherboard handle and support this CPU, with my gtx 1050ti 4gb?
At base clocks it should be fine.
Do you know if the ASUS P7H55-M is a good motherboard for overclocking?
Just Cause Yes
i have an p7h55-m/br, i haven't any option to overclock, anything i can do to boost a little de cpu performance ?
Have u tried looking in bios for settings called like "Ai Tuner" / "Ai Tweaker" next to the Main settings page?
Edit: I looked to the board page and seems it was sold only to Brasil region and further looking into documentation it doesn't have Ai Tweaker function, only "Advanced" where u can config your CPU to limited options like enable C1E/EIST or similar, nothing about more advanced settings to bump up cpu/memory performance.
In short - your motherboard is the problem - kinda like board for OEM PC's... the simpliest P7H55 without M or M-PRO can do a lot - i have P7H55 personally (EU region) and my X3430 bumped up to 3.8GHz (19x200MHz)
cheers m8, hope i helped you
Bro I have a question , I have the exact same motherboard as you GA-H55M-USB3 REV2.0 I've just built my new build and it seems I'm not getting any power to the motherboard , have you had any issues with this mobo and power issues ?
Never.
hey i have same bios and same processor so my bios doesent enable only half off ram and the computer freeze randombly like when its freeze its display but cant do anything plz help bios settings
Sounds like a faulty motherboard &/or stick of ram.
Currently i have a i5 760 at 3.6ghz at stock voltage....would be possible to have this speed at stock voltage with a x3440? I want to trade it for the extra threads
I think so. They overclock really well. Only one way to really find out is to try it. Every cpu is different, so it may or may not make your target speed. Luck is a big part of overclocking.
Hi guys! I have this x3450 and gigabyte 4slots ram. Im not sure why does my system unit temp goes high, i already applied a thermal paste, using a stock cooler, has 80mm and 120mm casefan. Any help would be appreciated, thanks!
I recently bought the xeon x3460 and it oc'd to 3.5ghz very easily but my mobo doesn't like the bclk
Asus Mobo?
I have a xeon x3460 and i want to overclock it to run at 3,8-4Ghz or more. And can you help me overclock it please ?
i have gigabyte p55 ud3l. can i overclock xeon x3450 up to 4.0 ghz ?
not without good cooler.
I did exactly same but cant open windows, it resets
Hi Guys Need Help GA-H55M-USB3 motherboard if change to i7 870 and to window 10 still need to update bios? or just format like normal no need to change any or update bios?
no
HI! Need help, i have a GA-H55M-D2H and i make OC in this same processor but when i upload the frecuency my pc not started correctly, not loading windows, or totally no work. I must put the default settings on my bios and now work normally but i want up my frecuency in this processor, anyone can help me? sorry for my vocabulary, im spanish. Greetings.
Make sure your ram is on the lowest multi. Bump the FSB up in small increments.
i follow your video exactly of you, need make more things? thx
What cpu you got ?
Xeon x3450
Clock Bench can you help me?
Hello CLOCK BENCH and to all who watch this video I have a very important question please I wait for your comments, with this xenon x3450 processor at speeds of 4.0, 4.1 or 4.2 mhz which would be the maximum graphics card that could be put having the smallest neck of bottle, I think a gtx 970 or 980 of 4gb or even a gtx 1060 of 6gb, please derive what you think would be the maximum gpu well approved by this processor, thank you very much
I’ve seen people run 1060 6GB or 580 8GB equivalents on these systems, those should be fine.
Though a 970 may be the most perfect fit.
You should've used the Gigabyte P55 motherboard for overclockng either the X3430, X3440 or even the X3450 and X3470
If I had one I would use it. But end result is still similar.
Really? But i heard that the P55 can overclock even higher?
I'm not motherboard limited. The problem is CPU temps.
Ok that makes sense! So would you suggest me to go for 4.2Ghz with a P55 motherboard? What cooler should I use? Thanks in advance
Doesn't really matter man. You'll have cpu temp issues before the motherboard becomes a problem. Just get the best cooler you can afford. D14 or D15 are about the best you can get.
Hi man,
İ have X3470 and Asus P7H55M-LX i can overclock this CPU? and you have normal bios or mod bios? and my bios drivers for Windows 8.1 i can install Windows 10?
Thanks for now men.
And what is you Cpu cooler?
Heya mate, Well the P7H looks like a really budget board so probably fairly limited. I have not personally used that motherboard so can't really say other than to give it a shot! As for Win 10, absolutely. Just install it & you should be good to go.
Clock Bench е
Hey,i have xeon x3440 and im having trouble getting the cpu above 4GHz.when i set it to 4.1/4.2 it just doesn't want to boot,my mobo is asrock p55 pro with the latest bios
Make sure your ram is at or under spec.
Clock Bench i have 2 different ram,team elite and team elite +.the team elite one can reach 2133mhz but the team elite + dont,so ill try to just put the team elite ram in and see what happend
Well, you wont be running the ram at those speeds on 1156 platform that's for sure. Put the ram on the lowest multi (slowest) to eliminate ram issue & see how you go.
Is D2917 motherboard can be overclocked?
No
Hi do you think a Cooler Master Hyper TX3 EVO cpu air cooler is good enough to over clock the xeon x3450 with?
Yeah for sure. It's a good budget cooler. Wouldn't say fantastic, but it's WAY better than the stock cooler.
So should i go with the Cooler Master Hyper 212 X CPU Cooler instead
Definitely ! A much better choice. Should see an easy 3.6-4Ghz overclock with that cooler.
Alright thanks man
Hey pal love your video and you simple style of explaining!
I bought a GA H55M UD2H board and a scythe katana 4 cooler.
What do you think about the katana 4? My oc goal was around 3,6-3,8 GHz do you think the katana can handle it? Would love to hear your thoughts.
Did you delid your processor?
No
Ran Ng Nope it's not. I've actually delided it. The older ones are soldered.
Overclocked mine to 3.8 GHz on a p7h55 mobo and I'm satisfied with that.
can someone help with asrock h55m-le?
anyone have any x3430 oc guides? i just wanna oc it to 3.2 ghz
yes
Tech Yes City has an oc guide
Anyone got a x3470 oc guide? same h55m usb3 mobo???
i have x3480 and i can put BLCK to 25 WTF
ok?
FAKE.
Thank you.