Using two on the i2c strip is tricky. Only one on em the i2c strip the other on can 2 with the i2c strip on can1. But you can use the other ports in the i2c strip for battery monitoring
So I’m curious. We’re a year out from this video, the functionally promised ever arrive here? I’m working on a rover build and wondering if I even need anything besides the hero3.
Good afternoon. Please help, I downloaded the firmware 4.3.2 for pixhawk4 mini. I put all the settings that are in the CAN description. I cannot connect MATEK M10-L4-3100 to pixhawk. I have set up CAN:CAN_D1_PROTOCOL>1 CAN_P1_DRIVER>1 GPS_TYPE>9 NTF_LED_TYPES>231 BRD_SEFETIENABEL>Oh, where did I go wrong or something I haven’t installed yet? help please fix: EKF3 waiting for GPS config data. Tried many options, the result is unchanged.
I connected two here3+ gps in CAN 2 port in carrierboard to Cube Orange+ but its showing GPS2 unhealthy warning though no of sat are 15 ,did any one experience this ?
I can only partially answer this question. But there are often dual barometers and dual gyro/accelerometers that are vibration isolated. Powerful MCU…etc
Yeah the Cube has 3 gyros 2 of them vibration isolated on temperature controlled dampers, dual/triple baros. The point is reliability and redundancy. This is meant for mission critical and commercial craft, big jets etc not hobby stuff.
Mission critical and commercial man please, don't try and hype this thing to a level its not supposed to be, all i read about is people having problems with getting it up and running properly.@@rotorshotfpv4401
Using two on the i2c strip is tricky. Only one on em the i2c strip the other on can 2 with the i2c strip on can1. But you can use the other ports in the i2c strip for battery monitoring
It is complicated..., but can it be done? Do you know how to do it?
Very detailed video! Amazing
Excellent video. Thanks for going over this!
How can you go from disarm to arm when there is no arming switch on Here 3 GPS/Compass?
can we connect ardusimple rtk gps to a matek FC ? it has UART output to computer, can we connect this to the flight controller somehow?
So I’m curious. We’re a year out from this video, the functionally promised ever arrive here? I’m working on a rover build and wondering if I even need anything besides the hero3.
Ola, estou com esse setup que vc mostrou, porem com uma DJI o3, mas nao consigo mostrar o OSD no oculos.. voce tem alguma sugestao:?
Waiting for herelink v1.1 setup video would love to know the uses of ETHERNET port on the herelink air unit..
Pretty interesting hardware indeed, Ian! Fantastic review! 😃
Stay safe there with your family! 🖖😊
Good afternoon. Please help, I downloaded the firmware
4.3.2 for pixhawk4 mini. I put all the settings that are in the CAN description. I cannot connect MATEK M10-L4-3100 to
pixhawk. I have set up
CAN:CAN_D1_PROTOCOL>1
CAN_P1_DRIVER>1 GPS_TYPE>9
NTF_LED_TYPES>231
BRD_SEFETIENABEL>Oh, where did I go
wrong or something I haven’t installed yet? help please
fix: EKF3 waiting for GPS config data. Tried many options, the result is unchanged.
Can you connect to a CAN BUS Splitter to extend the distance from the GPS to the board?
Very interesting, if I put two of them could improve the position and direction of the vehicle?
Here 3 + would work with Pixhawk Orange Cube, right? Or it would work with Pixhawk Orange cube + only?
Cheers for the video! Any idea what’s going on with the HerePro with the uBlox F9P? Is that still going to released at some point?
I connected two here3+ gps in CAN 2 port in carrierboard to Cube Orange+ but its showing GPS2 unhealthy warning though no of sat are 15 ,did any one experience this ?
Hi Ian, My here 3+ is showing white LED. Is that a issue?
No you can change that in the settings. It sounds like you have not enabled the can led, Look for NTF_LED setting and turn on canbus. .
can and gps parameters are not showing my ground station ,can any one help me ?
Will this work on the existing CUBE Orange AutoPilot
Yes
I'd prefer everything like remoteid on carrier board rather than this setup. Feels like waste of huge resources using H7 on GPS.
It’s what’s available. The issues is nothing else is
We installed GPS yesterday, and now the orange cube is bricked. It died the exact moment we switched to can bus.
Did you return the Cube?
Why would i choose something like cube orange over one of the matek FCs?
I can only partially answer this question. But there are often dual barometers and dual gyro/accelerometers that are vibration isolated. Powerful MCU…etc
Yeah the Cube has 3 gyros 2 of them vibration isolated on temperature controlled dampers, dual/triple baros. The point is reliability and redundancy. This is meant for mission critical and commercial craft, big jets etc not hobby stuff.
Has 3 gyros. Mags, etc.
Mission critical and commercial man please, don't try and hype this thing to a level its not supposed to be, all i read about is people having problems with getting it up and running properly.@@rotorshotfpv4401
👍
First