That was one of the first things I wish I would've done when I got my Z....it took me 6 years to do the shifter. I did the clutch, flywheel and shifter. Best results ever😊
Hello brother. I hv been following your videos like forever. And i cant believe i missed this one. I am going to irder myself a wk short shifter for Evo 9 MR now. Btw, still lovin your attention to detail. Keep it up brada!
Wow... que lindo ese EVO... siempre me da la misma sensación cuando lo veo, increíblemente puede que piensen que estoy loco pero lo escogería sin pensarlo antes que muchos otros coches que son muy codiciados, gran trabajo brou... saludos desde 🇨🇺👍👍👍comenté antes de terminar el video🤦♂️🤦♂️🤦♂️... los brazos hidráulicos le dan un extra especial una mejora que se nota mucho al abrir la cajuela
Hi Chris, fantastic and concise video👍👏👏👏👏bet that one counts as the most comfortable modification yet 😉😎😎😎. So great to see you clean before installing that wonderful shift gate mechanism too 👏👏😉. Only one problem.....it ended so i had to replay a few times 😂😂😂...hood struts an epic touch too....clean look is best 👌
Fyi, the center console top piece is still available brand new for like 60 bucks that's pretty cheap ! Got the information from my local dealer here in France
You can lower the shifter by 25mm just by taking out the red logo that sits under the shift knob, but.. It gets harder to shift cause as you said it's so.. Short.
drove my cousins evo 8 that had a 5 strenghted transmition, and we where looking for a shortshift option, and I think there are, they still look oem outside, but the movement on the shifter is around 25% shorter, you might like that option, its not as short as the this one you installed but on the 5speed it was shorter than oem
Hey Chris! Awesome video thanks for sharing. How did you get the updated climate control? Can you share a link or any info? And what color are your TE37's?
Hello bro. Ive been wanting to buy this shifter as well on my lancer evo. How long it takes to ship out upon purchase. Enjoy your vids. Thanks for sharing
Not akward at all at least for me since I have big hands! I also learned you could remove the red collar in the middle and it makes it about a inch shorter closer to the reverse lever
whats your wheel and tire setup? Got any rubbing? and did you have to roll your fenders? I'm super OCD about my evo too. Trying not to roll my fenders in fear of damage
Hello how are you ı wish your fine. We have a 3 question. İf you are available please answer to me. 1-)I want to buy myself an evo but I'm undecided. Do you think 8 or 9 is better? 2-)What changes did you make to the car and how much horsepower did you get? Do you have a list of the changes you made? 0-100&0-200 km how many seconds? 3-)Is it suitable for daily use and does it have any malfunctions or problems?
Shepherd Trans recommended no short shifter as it wears the trans.. but curious with this as its a whole housing and not just your traditional short shifter.. Any idea if this would wear the trans? Also how short can you shorten the shifter?
That shifter looks to be very similar to the B&M shifter in my S13 240SX in terms of shifter feel and throws. My B&M worries me sometimes when I'm downshifting. I worry I will money-shift it. You get the same feeling?
It clicks on perfectly and you don't. need the zip ties at all they just put it in the manual im guessing as a double safe but it clicks on exactly how oem does
I need help with a wheel and tire setup for my 9 MR. I don’t want to roll fenders and I’m looking for a fitment similar to what you have. Also what cat and Dp are you running with the Tomei?
I have a specific video here explaining my entire fitment and how to do it I have it straight pipe all the way but that will change soon when I build the engine!
John 3:16 says from the king James Version: For God so loved the world, that he gave his only begotten Son, that whosoever believeth in him should not perish, but have everlasting life. John 3:16 deep meaning This is what is important in the highest away about Christianity, that God love everyone in the world enough to come in the form of a man,by using Jesus,And to die for us, so that anyone who depend on him will be saved from spiritual death forever. Another meaning: Because god love everyone in the world, he give away his only son, so that anyone who depend on him should not die for ever, Instead that person should have life for ever. Matthew 6:33 says But seek ye first the kingdom of God, and his righteousness; and all these things shall be added unto you. Mathew 6:33 meaning Search for the truths and peace and joy from god, in a way that is important to you more than other things, and live in the same way that he want you to truly live, by his laws,and he will provide everything you need.
Yes!! I learned that after I had made the video but removed it right away to see if I can get the best of both worlds lol its still a little higher but better
@@ChrisGoorbarry definitely better, super easy to install and very rewarding! WK definitely knew what they were doing when they came out with this. I still have OEM bushings in mine, I wonder how much of a difference it would make it once I replace them with torque’s bushings 🤔
This guy is on his way to become the 1% of youtubers that make $. Details not only in his car but the way he edit to how he takes notes, WOW!
Love your dedication to Evo’s 🙌🏾 stay blessed bro
Thank you you too!
That was one of the first things I wish I would've done when I got my Z....it took me 6 years to do the shifter. I did the clutch, flywheel and shifter. Best results ever😊
I actually like it with out the carbon fiber cover you're trying to create, looks sick that you can see the cables, raw af
One of the best Evo ever built, I can imagine and know how you feel it also gave me a smile 😀
I've been waiting so long for you to do a short shifter!!! Glad I can finally get a new detailed video to follow!!
That looks absolutely amazing!!!! I can just imagine how crisp that feels while shifting!!!! 😍
Quality video! Been eyeing this short shifter for a while and I think I'm gonna cop
The red looks beautiful asf
Yeaaaa buddy !!! Love that addition 💪🏽💪🏽
Bought the hood dampers because of this! Great price 🤘. Nice vid!
Hello brother. I hv been following your videos like forever. And i cant believe i missed this one. I am going to irder myself a wk short shifter for Evo 9 MR now. Btw, still lovin your attention to detail. Keep it up brada!
Wow... que lindo ese EVO... siempre me da la misma sensación cuando lo veo, increíblemente puede que piensen que estoy loco pero lo escogería sin pensarlo antes que muchos otros coches que son muy codiciados, gran trabajo brou... saludos desde 🇨🇺👍👍👍comenté antes de terminar el video🤦♂️🤦♂️🤦♂️... los brazos hidráulicos le dan un extra especial una mejora que se nota mucho al abrir la cajuela
Hi Chris, fantastic and concise video👍👏👏👏👏bet that one counts as the most comfortable modification yet 😉😎😎😎. So great to see you clean before installing that wonderful shift gate mechanism too 👏👏😉. Only one problem.....it ended so i had to replay a few times 😂😂😂...hood struts an epic touch too....clean look is best 👌
Was waiting for this video ! 🔥
Love your Evo. I've always wanted one.
Wow my friend it looks good the shift
Yes!
Great video bro . I love the channel . Just got my 2005 evo 8 .
U put a smile on my face 😃
Good video there watching from the UK
Evo VIII is more interesting than Evo X,
Evo VIII is absolutely Amazing 👍
Fyi, the center console top piece is still available brand new for like 60 bucks that's pretty cheap ! Got the information from my local dealer here in France
It's discontinued in the US but I found it in japan!! So might get it! Also different for me since the car is RHD
@@ChrisGoorbarry yeah true i forgot about the RHD, but they still can provide RHD parts even if we are a LHD country
Awesome brother como siempre, hey el Evo X que ah pasado con el, espero ver mas videos , ✌🏻✌🏻
Ahora viene stage 2 for the evo x! Gracias por ver los videos bro!
Awesome vid and picked myself a set of those gas hood struts. If Chris reckons they are good that’s enough for me to purchase 👊🏻
You can lower the shifter by 25mm just by taking out the red logo that sits under the shift knob, but.. It gets harder to shift cause as you said it's so.. Short.
drove my cousins evo 8 that had a 5 strenghted transmition, and we where looking for a shortshift option, and I think there are, they still look oem outside, but the movement on the shifter is around 25% shorter, you might like that option, its not as short as the this one you installed but on the 5speed it was shorter than oem
Now thats a short shifter
Love your EVO man...🤘😁
❤🎉the evolution!!
very good, makes me whant one now good job well done cuz xxx
Let's go
Hey Chris! Awesome video thanks for sharing.
How did you get the updated climate control? Can you share a link or any info?
And what color are your TE37's?
The shifter that you’re installing would work even better if you have face plating gears
Hello bro. Ive been wanting to buy this shifter as well on my lancer evo. How long it takes to ship out upon purchase. Enjoy your vids. Thanks for sharing
Hey Chris, I assume this has the pull up reverse?
I want one still after 20 years, just sucks most are high milage and still going for $30k and up for a decent one.
I'm a little late. I was wondering which model of the shifter you bought the evo 4-9 5 speed or the evo 9 6 speed?
I’m almost sold on one now that shifter looks sick! How is it going into reverse? Is it awkward with the lever/plunger being higher than stock?
Not akward at all at least for me since I have big hands! I also learned you could remove the red collar in the middle and it makes it about a inch shorter closer to the reverse lever
whats your wheel and tire setup? Got any rubbing? and did you have to roll your fenders? I'm super OCD about my evo too. Trying not to roll my fenders in fear of damage
Everything is on my youtube even the fender shave episode my fitment is 18x9.5+22
Hello how are you ı wish your fine. We have a 3 question.
İf you are available please answer to me.
1-)I want to buy myself an evo but I'm undecided. Do you think 8 or 9 is better?
2-)What changes did you make to the car and how much horsepower did you get?
Do you have a list of the changes you made?
0-100&0-200 km how many seconds?
3-)Is it suitable for daily use and does it have any malfunctions or problems?
great videos. beautiful car.
Shepherd Trans recommended no short shifter as it wears the trans.. but curious with this as its a whole housing and not just your traditional short shifter.. Any idea if this would wear the trans? Also how short can you shorten the shifter?
I have no idea but I'll definitely keep that in mind to see if It causes any issues
You are correct it will wear out the trans and destroy the syncros,best to stick with the factory mitsubishi shifter
I love you work man❤️❤️
Your video was very good!
Looking to get one of these short shifters. Can we get a follow up on how it feels after its broken in?
That shifter looks to be very similar to the B&M shifter in my S13 240SX in terms of shifter feel and throws.
My B&M worries me sometimes when I'm downshifting. I worry I will money-shift it.
You get the same feeling?
for now no but I've only driven the car twice since this video I need to drive it more and see how i feel about it long term!
My shifter also is sloppy. What is the reason? And how to fix it?
Very nice!
What's with the janky zip ties holding the cable to the base? Cool product tho
It clicks on perfectly and you don't. need the zip ties at all they just put it in the manual im guessing as a double safe but it clicks on exactly how oem does
Pretty dope, a work of art for sure! Would like your opinion on how the shifter feels down shifting into a turn. Keep chasing perfection brother👌🏼
It feels good tbh I want to drive it more and see how it feels long term! I'll get back to you after I do!
Where can I can the bolt that you used to replace the 10mm old ones?
Did you ever find the insert for the center console?
What made you choose WK motorsports short shifter? I mean there's a lot of different ones out there.
Just trying it! Which ones do you recommend?
Wk are the only ones that make a shifter for a 6spd and it's a good price
@@juddy953 There's other 6 speed short shifters.
I need help with a wheel and tire setup for my 9 MR. I don’t want to roll fenders and I’m looking for a fitment similar to what you have. Also what cat and Dp are you running with the Tomei?
I have a specific video here explaining my entire fitment and how to do it I have it straight pipe all the way but that will change soon when I build the engine!
@@ChrisGoorbarry I’ll search again, but I didn’t find it the first time. I ordered a Tomei and I’m still running stock cat and DP.
Hello evo dude & everyone, I come to tell you that the LORD LOVES YOU,ALLOW HIM TO BE IN YOUR LIFE COMPLETELY,
John 3:16 says from the king James Version:
For God so loved the world, that he gave his only begotten Son, that whosoever believeth in him should not perish, but have everlasting life.
John 3:16 deep meaning
This is what is important in the highest away about Christianity, that God love everyone in the world enough to come in the form of a man,by using Jesus,And to die for us, so that anyone who depend on him will be saved from spiritual death forever.
Another meaning:
Because god love everyone in the world, he give away his only son, so that anyone who depend on him should not die for ever,
Instead that person should have life for ever.
Matthew 6:33 says
But seek ye first the kingdom of God, and his righteousness; and all these things shall be added unto you.
Mathew 6:33 meaning
Search for the truths and peace and joy from god, in a way that is important to you more than other things, and live in the same way that he want you to truly live, by his laws,and he will provide everything you need.
Perfect 🎉
Sweet
Dammit now I want one...
It would have been nice if the shifter would look OEM.
Can i ask what mic you're running :)?
Do a give away with the old ones.
I removed the red collar and it made it about an inch shorter
I also chucked the shift knob into a drill and spun it on scotch bright, it gave it a brushed finish, the chrome was too bright for my Oem+ interior
Yes!! I learned that after I had made the video but removed it right away to see if I can get the best of both worlds lol its still a little higher but better
@@ChrisGoorbarry definitely better, super easy to install and very rewarding! WK definitely knew what they were doing when they came out with this. I still have OEM bushings in mine, I wonder how much of a difference it would make it once I replace them with torque’s bushings 🤔
What are the wheel and tire specs on this bad boy?
Geekinnnn 🤓🤓
Thank you for helping me record the hood shocks part lol
You need to measure higher because the pivot point changed
what radio is that?
Nice
This increases ur chance of money shifting it and over rev ing your engine
If anyone is interested wk Motorsport quoted me $669 for the shifter shipped.
Was anyone able to make carbon plate
700 bux
🪟🪟🪟🪟
$700 for Chinese metal, no thank you. There’s much better options out there.
please share, need 6speed version
Share kindly for 6 speed
@@georgenickolas7321 CAE
they are all the same cheaply made and will wear out the trans and destroy the syncros,best to stick with the factory mitsubishi shifter
Bravo.❤❤❤
The recaro seats in the 8 are such an eye sore to me
vasyn apparel co. what? you also following FK8 AWD!
Hey man could you text me on ig I got some questions about my evo and I only trust the best of the best. There’s no evo tuners where I am
Steves4g