How to fix a leaking Hot Water dispenser

My Hot Water dispenser recently started leaking out of the faucet. In this video I go through the process of repairing the leak with a little bit of time and a couple inexpensive O-Rings.
O-Rings - amzn.to/3TL7eJ3
Danco Silicone Grease - amzn.to/3vRENBc
Craftsman Adjustable Wrench - amzn.to/3vRENBc
Craftsman Pick - amzn.to/43LTDpo
Some product links are affiliate links which means if you buy something I'll receive a small commission for the channel!

[@robertgilbert5686]

Thanks for the most informative video. It is very helpful. I am wondering about the size of the replacement O-rings. When I removed the O-rings from the plunger, it appeared that the upper one was larger than the lower one. Also, I was under the impression that all of components were sized metrically, not English. Have the 1/4" x 1/8" O-rings that you installed been performing satisfactorily? Also, did you size and replace the larger O-ring at the lower end of the brass cartridge?

[@BIsForBudget]

Hi @robertgilbert5686. For my dispenser, I used the same size replacement O-Ring for the top and the bottom. No other items were replaced. It's been roughly 9 months, and I haven't had a single unexpected drip. I used the the o-rings in the video description. Hope this helps. Thanks.