Thanks. You gave me the confidence to make the mainteinance myself for my card. Clear and straight to the point video. Do you know anything about the backplate pads?
as per reading some threads in Reddit about backplate pads, it is still unclear to me if I have to consider modding my GPU with backplate pads, I am satisfied with the results after repasting/replacing my thermal paste and pads on my GPU.
@@MohammadYusophMMuti yes, i have stumbled upon a person asking asrock about this for the rx570 and asrock replied that the default thermal pads thickness of this gpu is 1.5
succesfuly changed my paste and pads. tas same tayo ng GPU asrock rx 570 din saken, after changing and cleaning the card yung board ng GPU saggy na, tas may drop na sa performance. ano input mo sir baka may mali akong nagawa.
alive and kicking pa din yung unit ko sir, gamit ko sya sa shop ko, so far, yun pa din yung last replace ko ng thermal pads and paste, ask ko lang if anong thermals pads and paste ang gamit mo
@@BelialsAwakening sa pads medyo okay pa mag generic ka pero sa paste ang dapat mag invest ka ng good quality paste, mas mabilis uminit ang mismong area ng may paste kesa sa may pads, doublc check mo nalng yung screws ng board sa fins
mi gpu runs over 40º in w10 and 65-80º on premiere, i ve changed the thermal paste and cleaned it but it goes the same. do u recommend me change the thermal pads?
when you are planning to repaste you therma paste, consider replacing your thermal pads too, saves a lot of time in disassembling and assembling the gpu, i am currently using a quite expensive thermal pads here, you can screenshot the thermal pads for reference
Temp ko ngayon sa asrock rx580 nasa 92°max bumaba ba temp? Medyo putol ang vid e pero nasa 40° kita ko, musta naman ngayon?? Mahal kasi ng thermal pads
masyado mataas yang 92 mo sir, siguro better check mo airflow ng case mo baka hindi ganun ka effective, or need mo na tlga replace ang paste at pads nyan baka tuyo na masyado, akin kasi sa highest ko lang 80 tlga, tapos ito ngayon sa fortnite ko from 50-60 pumapalo nalng sya ng 40-50, tapos if mag replace k ng pads at paste better dun ka sa mahal na para sulit yung pagkalas mo ng gpu kasi risky din sa iba ito sa pag diy, yung iba dito di na gumanwa kanilang gpu, subok ko tong gelid at arctic kasi
dyan po ako hindi sigurado, hindi po ako technically knowlegeable sa mga ganitong bagay, lakas loob lang din po ako nag diy mag repaste at replace ng thermal pads boss, pasensya na po
Thanks. You gave me the confidence to make the mainteinance myself for my card. Clear and straight to the point video. Do you know anything about the backplate pads?
as per reading some threads in Reddit about backplate pads, it is still unclear to me if I have to consider modding my GPU with backplate pads, I am satisfied with the results after repasting/replacing my thermal paste and pads on my GPU.
how much thermal pad you need?
how many monitors can use?
what thickness of thermal pad did you use
1.5 as someone told me that it was the manufacturers standard on this gpu
Hi, can I use 1.0mm thermal pads instead of 1.5mm pads or duplicate 1mm pads? Is that a problem?
someone says that he already ask this to asrock and asrock tell him that the default thermal pad thickness is 1.5mm, that's why I use 1.5mm here
@@MotomotoPinas Okay and I will use 1.5mm thermal pads thanks for the reply.
@@ANDRIJJA okay thanks
Hello, Im done cleaning and repasting my 570 (asrock too) but i noticed the vram’s board is sagging because of the heatsink and fan
Gracias Master genio pro
Wow 40°C !!!
Is thermal pads necessary if re thermal pasting?
for me it's a yes, since it bring me positive results like the temp is less to 5-15 degree celcius
There was a lot of change after changing the paste and the thermal pads in terms of temperature.
I only bought thermal paste not pads. Is it ok if i only use thermal paste for the gpu itself?
for gpu thermal paste for the vrams pads,
All the thermal pads are 1.5 thick?
depends on gpu manufacturer, please consult manufacturer customer support first,
@@MotomotoPinas For phantom gaming ASRock rx 570?
@@MohammadYusophMMuti yes, i have stumbled upon a person asking asrock about this for the rx570 and asrock replied that the default thermal pads thickness of this gpu is 1.5
succesfuly changed my paste and pads. tas same tayo ng GPU asrock rx 570 din saken, after changing and cleaning the card yung board ng GPU saggy na, tas may drop na sa performance. ano input mo sir baka may mali akong nagawa.
alive and kicking pa din yung unit ko sir, gamit ko sya sa shop ko, so far, yun pa din yung last replace ko ng thermal pads and paste, ask ko lang if anong thermals pads and paste ang gamit mo
@@MotomotoPinas thermal pads ay same tayo ng ginamit GELID. thermal paste naman ay yung generic lang. baka nung pag re assemble may mali akong nagawa.
@@BelialsAwakening sa pads medyo okay pa mag generic ka pero sa paste ang dapat mag invest ka ng good quality paste, mas mabilis uminit ang mismong area ng may paste kesa sa may pads, doublc check mo nalng yung screws ng board sa fins
@@MotomotoPinas Sigesige sir, Maraming salamat!
mi gpu runs over 40º in w10 and 65-80º on premiere, i ve changed the thermal paste and cleaned it but it goes the same. do u recommend me change the thermal pads?
when you are planning to repaste you therma paste, consider replacing your thermal pads too, saves a lot of time in disassembling and assembling the gpu, i am currently using a quite expensive thermal pads here, you can screenshot the thermal pads for reference
Temp ko ngayon sa asrock rx580 nasa 92°max bumaba ba temp? Medyo putol ang vid e pero nasa 40° kita ko, musta naman ngayon?? Mahal kasi ng thermal pads
masyado mataas yang 92 mo sir, siguro better check mo airflow ng case mo baka hindi ganun ka effective, or need mo na tlga replace ang paste at pads nyan baka tuyo na masyado, akin kasi sa highest ko lang 80 tlga, tapos ito ngayon sa fortnite ko from 50-60 pumapalo nalng sya ng 40-50, tapos if mag replace k ng pads at paste better dun ka sa mahal na para sulit yung pagkalas mo ng gpu kasi risky din sa iba ito sa pag diy, yung iba dito di na gumanwa kanilang gpu, subok ko tong gelid at arctic kasi
At what temperature did it run afterward?
before it was running like minimum 60 at fornite game then after same load, same game, 40 peaking at 50
May link ka po ba san mo nabili yung pads at thermal paste sir?
shopee lazada lang po sir search mo lang po yung name
This is weird, we have the same gpu model and i used 1.5mm pads. The long pads seems to be not thick enough unless i put it wrong?
try checking if the board and rad is well put together , usually clearances occur when they are not put together properly
kea pa kea marepair asrock ko rx570 bigla kc ng nodisplay habang nglalaro pero umiikot pa fan balak ko repaste 3yrs nrn kc xa
dyan po ako hindi sigurado, hindi po ako technically knowlegeable sa mga ganitong bagay, lakas loob lang din po ako nag diy mag repaste at replace ng thermal pads boss, pasensya na po
Yung ganito nag gagarbage display :(
baka sira na po tlga
Taena usto ko zana magpalita kaya lang baka di na magdisplay HAHAHAHAH
kaya mo yan, ako nga walang background sa ganito, makalikot lang tlga ako at malakas loob XD
I fucking love you