I learn along the way brother... One th ground wrenching ( hits different ) than in a shop wrenching... Its like a work-out ... I thank you so much for the support on this video and beyond!
God bless and keep up the good strength. I had my share back in the day of 80 & 90's Lincoln town cars. Liked them but that constant transmission weakness 4r70w made me go Toyota.
@@robertdiehl9003 that i can understand i will go to Toyota before a Honda for sure... Nissan was my go to 2002- and back...Stay bless brother keep up the fight..
Glad you are feeling better. I've been a subscribed for many many years. I just bought a 92 cop car and on the way home the rear end locked up at 70 miles an hour.luckily no one was hurt but I need a used rear axle
whoa whoa? I am glad you are ok brother George... You still have a sweet and rare car.... and this one i have to go through the rear and do axle bearing ect ( nothing deeper than that ) thank you so much for the support over the years,,, and I am very sorry to about you car bro...
yeah brother it was rough ( still rough ) but i have to see this thing all the way through.....Next going to check on the white Vic and see whats up....
@@williamm8598 thank you for that brother love always bro...Now i am looking at this white vic... well here we go at this thing....Sometimes i want to yank the motor out or find the proper engine harness for it to work right
Thank you for that brother ... Some guys would not show that ( I did )... Thats was done out of frustration a pur ( f it moment ) cause I know I do not want a steel drive shaft.... Thank you so much for the support on this bro..
with your you must keep that neutral safety switch plugged-up.... 2004 and down you kinda dont need it ( cut wires and hook it up ) but you 2009 NEEDS IT if you cut wires the car will run and shut off.... So do not cut and keep that plugged in.. Get a clutch pedal from ADTR...
@@datznasty1475 1998-2005 is kinda easy, but when you go to the drive by wire the body is a little different ( no place to do a simple clutch pedal ) but ADTR has it for you car... makes it easy, just cost a little
I thank you so much brother for that... I will not let you down... Just keeping low budget not trying to spend like other channels so its a bit slow in that video department... I will have that Vic that other Channel will talk about for sure...
Man ur back at it ! Hope all is going well . My cousin got lime disease a few years ago.. hope ur doing ok . I guess I better be more careful here.. we have a deer that visits us most nights and I usually wear flip flops everywhere here.. we literally live in the forest. I’d be working on my car today, but our 5 yr old daughter has been sick throwing up every other day.. our hospital wait time a few days ago took nearly 6 hrs to be seen.
God Bless your daughter brother... I hope she gets better FAST... This Lyme deal is no joke... This is a mess some can have it for months or years but it will catch-up with ya... Hope your daughter is fine ...
Yeah brother I have bikes also... its a big mess here... I seen you paused for a moment... We just have to find cool ( HUMANS ) to be around... I must say you are a solid dude... Keep doing what you doing... I may join ya on the dirt -bike deal.... I have to get some funds up-- and i have to finish each car.... next video getting back to the white vix you gave me
i have been soul searching and dealing with family and ( life stuff ) i wanted to make a video but my mind was not right...I mat share a few things ( in the videos ) cause I have to.... Thank you so much for support in this manor John...
Thank you for the kind words brother... It was bad.... Now the shaft deal... I never thought abouit that we are going see whats good.. this car will not be for on road use as much ( as planned ) things do change , but its just a practice car in many ways..
Your mechanical knowledge is genius.
I learn along the way brother... One th ground wrenching ( hits different ) than in a shop wrenching... Its like a work-out ... I thank you so much for the support on this video and beyond!
God bless and keep up the good strength. I had my share back in the day of 80 & 90's Lincoln town cars. Liked them but that constant transmission weakness 4r70w made me go Toyota.
@@robertdiehl9003 that i can understand i will go to Toyota before a Honda for sure... Nissan was my go to 2002- and back...Stay bless brother keep up the fight..
Fantastic rebuild.
it was a reconditioning vs a rebuild ....Still was a headache...Also the unknown is a issue , but I thank you always for the support Rob!
Glad you are feeling better. I've been a subscribed for many many years. I just bought a 92 cop car and on the way home the rear end locked up at 70 miles an hour.luckily no one was hurt but I need a used rear axle
whoa whoa? I am glad you are ok brother George... You still have a sweet and rare car.... and this one i have to go through the rear and do axle bearing ect ( nothing deeper than that ) thank you so much for the support over the years,,, and I am very sorry to about you car bro...
It's good to see you up and around. That's some awesome progress
yeah brother it was rough ( still rough ) but i have to see this thing all the way through.....Next going to check on the white Vic and see whats up....
@bstfordchannel923 do you brother. I'll watch eagerly and support when needed.
@@williamm8598 thank you for that brother love always bro...Now i am looking at this white vic... well here we go at this thing....Sometimes i want to yank the motor out or find the proper engine harness for it to work right
Dude this is great work mabey less the u joint but still bad ass man !!! Glad to see u back at it
Thank you for that brother ... Some guys would not show that ( I did )... Thats was done out of frustration a pur ( f it moment ) cause I know I do not want a steel drive shaft.... Thank you so much for the support on this bro..
U should make a list of cars u got these parts off @bstfordchannel923
Yes I'm doing this to my 09 so this is perfect video
with your you must keep that neutral safety switch plugged-up.... 2004 and down you kinda dont need it ( cut wires and hook it up ) but you 2009 NEEDS IT if you cut wires the car will run and shut off.... So do not cut and keep that plugged in.. Get a clutch pedal from ADTR...
@@bstfordchannel923 do you say that because fabricating your own clutch pedal was a pain in the ass? Lol
@@datznasty1475 1998-2005 is kinda easy, but when you go to the drive by wire the body is a little different ( no place to do a simple clutch pedal ) but ADTR has it for you car... makes it easy, just cost a little
New subscriber here! I like your style on how you build. low cost! right up my alley.
Glad to have you aboard! its a little slow brother , but bare with me ... thank you for the sub and support!
@@bstfordchannel923 Keep rocking!
@@ralphjones-w3g thank you so much for this bro! I will man I will
@@bstfordchannel923 Anytime! I see you have the chops to up in there with the bigger channels.
Watched a few videos. Great work man. Stay blessed and healthy
I thank you so much brother for that... I will not let you down... Just keeping low budget not trying to spend like other channels so its a bit slow in that video department... I will have that Vic that other Channel will talk about for sure...
Man ur back at it ! Hope all is going well . My cousin got lime disease a few years ago.. hope ur doing ok . I guess I better be more careful here.. we have a deer that visits us most nights and I usually wear flip flops everywhere here.. we literally live in the forest. I’d be working on my car today, but our 5 yr old daughter has been sick throwing up every other day.. our hospital wait time a few days ago took nearly 6 hrs to be seen.
God Bless your daughter brother... I hope she gets better FAST... This Lyme deal is no joke... This is a mess some can have it for months or years but it will catch-up with ya... Hope your daughter is fine ...
@@bstfordchannel923 Thanks man , I'm back at the hospital...it's not busy tonight.. hopefully it's nothing major.
Will a 2000 ford crown vic rear end fit my 2011 ford crown police interceptor
nope those year vic are like 96 Vic 9 chassis wise ) you need 04-up rather get something close like a 2009-up Vic rear
What about a rear end out of a 2010 mercury grand marquis
@@ricardowinston14 yes that will work also.. it may have different gearing but it will work
I need to come visit the some of these projects! I’m back in to my car bullsh*t!
Yeah brother I have bikes also... its a big mess here... I seen you paused for a moment... We just have to find cool ( HUMANS ) to be around... I must say you are a solid dude... Keep doing what you doing... I may join ya on the dirt -bike deal.... I have to get some funds up-- and i have to finish each car.... next video getting back to the white vix you gave me
Hey dude where you been?
i have been soul searching and dealing with family and ( life stuff ) i wanted to make a video but my mind was not right...I mat share a few things ( in the videos ) cause I have to.... Thank you so much for support in this manor John...
Whats good bro
just hanging in there brother Jay... You know the vibes ( LIFE )
I'm happy you're better.
If it vibrates, will you weld other side to balance the shaft? Or let it ride?
Thank you for the kind words brother... It was bad.... Now the shaft deal... I never thought abouit that we are going see whats good.. this car will not be for on road use as much ( as planned ) things do change , but its just a practice car in many ways..