BST! I found a Unicorn :) a 2007 all white NM State Interceptor that ended up in the DPS car pool! Never had any lights, entennas, or cage with 101,000 miles... Plus it now has LX Sport rims on it :)
They will pop -up its like that over here it was about 7 months no panthers at all... Then you will see some... Maybe those Florida cars may make their way up...
@@bstfordchannel923 well, my car is down for the count. The cross member broke out of the frame going down the interstate. My exhaust was holding up the trans, and I had no idea it had broken. It started cutting out on the interstate here and there. I got to my exit and stopped by the store, went to start it back and it just cranks but doesn't start. That's where I noticed the cross member. I don't know what it messed up to stop it from running.
If you are ready to that car... what i wish i had done to my Aero is... Take a frame from a the 2003-up Vic and put it right underneath the Aero Body ( start there ) Thats a cheap upgrade and then in time you can up grade that vs the old one ...
Hey BST Ford! Ive been watching your videos for ahwile now and im very appreciative of what you have done and been doing ! I have simple questions: Would it be possible to mate or put together 4.6 2v head on 5.4 2v block ? Or vise versa ? Rememering seeing a video where they compared the two with its specs on the diameter of the air flows , and it said something along the lines saying thr 5.4 has wider diameter that could with your 4.6 2v project per say.
Since the 4.6 2v does have more hp but less torch compared to the 5.4. Was wondering if you could combine the two for a budget backyard perchance upgrade !
Here is the plan ( always was ) have many Vic with different engine combo... 4.6 2v, then 4.6 4v then another 5.4 4v ( maybe some 3v stuff. Cause its not enough done collectively ( in one space ) as far as Vic swaps thats ( junkyard based ) the problem with that ( video wise ) a small channel needs funds and bodies to help... I need the engine to see what is what to figure what is the best solution and route to go...
@bstfordchannel923 Man I love seeing all the vics you have put together , from the aero to the turbocharged vic ! But I felt the response , that's why in a way since I knew you were a mechanic dedicated to this, would probably have the better answer ! It is not done as much as it should be a appreciated
I need another 5.4 4v engine would love to bring my car so you can put it on the channel I think you would love it just because it’s kinda different in many ways.
Well brother i may make this happen if the pockets line -up right and if the engine is still there lol... I wish i was ready to do such a job for people, but i have so many cars here... looking for a shop to do things like this for people
Hey brother, I need to talk to you about my 01 grand marquis when you get a chance. My cross member broke and caused my trans to drop down to the exhaust. It started cutting out a little on my way home that day. It ran and idled perfectly until I cut it off. Now it cranks but won't start anymore. What do you think it could be? Maybe the fuel line got bent when everything dropped down, or a wire got pulled. If I can get it running, I can fix the cross member. I'll give you my email or whatever if you get a chance to talk. Thanks brother!!
bucket seats in a vic ?
Also the lincoln mk8 that tony made. Absolutely what I would do!
I would do the same with the 4dr version make it rear wheel drive.....
Look at all the good parts ! Power wash the carpet hang it up to dry.. and it will be like new ! The winter floor mats looked good !
That carpet i may get and put it to the side for later to be honest ( i may do just that bro )
98-02 be rockin'
Thats what you rocking bro? I like those to... I may get another 99 whale
@@bstfordchannel923 1998 P73 baby!
Look forward to seeing your videos. Good job,
Thank you brother for the support brother PB... I have some cool stuff coming engine wise
@@bstfordchannel923 always looking forward to it.
A cool project to do could be a apocalypse Crown Vic police car 👀
those navigators are so cheap here in ca on marketplace some are even under $1k but it'd cost so much to ship one
Really? out here we still kinda like them 9 I know i do ) people still rock them... Now that 2008 version 3v sucks I dislike how they look altogether
I would love to have that mark viii
Me 2 lol... i really need a shop
BST! I found a Unicorn :) a 2007 all white NM State Interceptor that ended up in the DPS car pool! Never had any lights, entennas, or cage with 101,000 miles... Plus it now has LX Sport rims on it :)
Yes brother I wish you can get that car!
I said that when the Continentals were new, they should have been rear wheel
I woud love to do 1 rear wheel drive i think that would be truly need on video 1 shot video... no part 1 no part 2 ... just 1 video
@@bstfordchannel923 OH yea!!!!!
Gt500 AWD crown vic!!!
YUP YUP! for sure thats the ticket!
1:07 that seat doesnt belong there😂😂whaatt
hope youre ok dude. u been quiet. merry xmas brother
i cant find any panthers where i live anymore unfortunately.
They will pop -up its like that over here it was about 7 months no panthers at all... Then you will see some... Maybe those Florida cars may make their way up...
@@bstfordchannel923 well, my car is down for the count. The cross member broke out of the frame going down the interstate. My exhaust was holding up the trans, and I had no idea it had broken. It started cutting out on the interstate here and there. I got to my exit and stopped by the store, went to start it back and it just cranks but doesn't start. That's where I noticed the cross member. I don't know what it messed up to stop it from running.
i wanna do a build on aero grand marquis but i don’t know what to do or get for it and it will be my first car/ project car if i can find parts
If you are ready to that car... what i wish i had done to my Aero is... Take a frame from a the 2003-up Vic and put it right underneath the Aero Body ( start there ) Thats a cheap upgrade and then in time you can up grade that vs the old one ...
Hey BST Ford! Ive been watching your videos for ahwile now and im very appreciative of what you have done and been doing ! I have simple questions: Would it be possible to mate or put together 4.6 2v head on 5.4 2v block ? Or vise versa ? Rememering seeing a video where they compared the two with its specs on the diameter of the air flows , and it said something along the lines saying thr 5.4 has wider diameter that could with your 4.6 2v project per say.
Since the 4.6 2v does have more hp but less torch compared to the 5.4. Was wondering if you could combine the two for a budget backyard perchance upgrade !
Here is the plan ( always was ) have many Vic with different engine combo... 4.6 2v, then 4.6 4v then another 5.4 4v ( maybe some 3v stuff. Cause its not enough done collectively ( in one space ) as far as Vic swaps thats ( junkyard based ) the problem with that ( video wise ) a small channel needs funds and bodies to help... I need the engine to see what is what to figure what is the best solution and route to go...
@bstfordchannel923 Man I love seeing all the vics you have put together , from the aero to the turbocharged vic ! But I felt the response , that's why in a way since I knew you were a mechanic dedicated to this, would probably have the better answer ! It is not done as much as it should be a appreciated
I need another 5.4 4v engine would love to bring my car so you can put it on the channel I think you would love it just because it’s kinda different in many ways.
Well brother i may make this happen if the pockets line -up right and if the engine is still there lol... I wish i was ready to do such a job for people, but i have so many cars here... looking for a shop to do things like this for people
How do I private message you I want to send you some videos of my 5.4 swap
Hey brother, I need to talk to you about my 01 grand marquis when you get a chance. My cross member broke and caused my trans to drop down to the exhaust. It started cutting out a little on my way home that day. It ran and idled perfectly until I cut it off. Now it cranks but won't start anymore. What do you think it could be? Maybe the fuel line got bent when everything dropped down, or a wire got pulled. If I can get it running, I can fix the cross member. I'll give you my email or whatever if you get a chance to talk. Thanks brother!!