How to Install and Program a Minn Kota Precision Battery Charger

แชร์
ฝัง
  • เผยแพร่เมื่อ 6 ม.ค. 2025

ความคิดเห็น • 9

  • @ssgyates
    @ssgyates 3 ปีที่แล้ว +5

    I was hoping to see the installation. The video went from here it is to installed.

  • @SJackson-uz9vx
    @SJackson-uz9vx 10 หลายเดือนก่อน

    This 4-bank (4-battery) charger has an Output of 15 Amps/battery for 15 Amps x 4 batteries = 60 Amps. The amperage output is specified at the Battery voltage (12+ Volts DC). The INPUT amperage, however, is determined at 120 Volts AC. So if the charger is about 90% efficient, the Input amperage would be approx. 12V/120V x 60 divided by 0.9 or around 7 Amps. In other words, well within the capacity of a 120 Volt AC outlet fed by a 15 Amp breaker or fuse.

  • @ryansackowitz7246
    @ryansackowitz7246 3 ปีที่แล้ว

    Can you plug into standard outlet with heavy duty extension cord ? Does it draw 60amp how do you get that out of an outlet?

  • @travisp3240
    @travisp3240 5 ปีที่แล้ว +1

    will this work with lithium ?

    • @MinnKotaMotors
      @MinnKotaMotors  5 ปีที่แล้ว

      Travis,
      Minn Kota trolling motors can run on Lithium Ion batteries. However, they are specifically designed to run on traditional lead acid batteries (flooded, AGM or GEL). Lithium Ion batteries maintain higher voltages for longer periods of time than lead acid. Therefore, running a Minn Kota trolling motor at speeds higher than 85% for a prolonged period could cause permanent damage to the motor.
      Thanks!

  • @Cornuts1000
    @Cornuts1000 6 ปีที่แล้ว +1

    nice charger but returning it as too big to find anywhere to mount it. This product is just much too large

  • @jerky9338
    @jerky9338 9 วันที่ผ่านมา

    Video was useless needed too show hooked up

  • @BdubH1
    @BdubH1 4 ปีที่แล้ว +1

    That Wiscansin accent is just too awful to listen to.