dynamic damping, no pidsum raise, no thrust linear, no throttle expo? hard to believe that you really tuned that drone, when one has watched your previous videos
In case anyone else has flyaway and surging problems with this tune as I eventually did after moving to a humid environment, try turning off the anti-gravity to test if that fixes issue, as it did for me. After that you can add anti-gravity in small increments to find what is optimal for your situation..
I teach young children fpv.and been donated from many company's and good friends gal kremmer painless 360 sync fpv and more.had alit of micros .but these look sweet.would love to get a couple of these.great review
Is there an explanation for setting ESC to 96k for these 1002 motors versus not finding that is best setting for larger 5" prop motors in your earlier study?
Awesome video. Mine did that as with the motors bought one thinking it was defect. I got a new pid from sub250 because my camera had some shakiness to it. It's better bit I still get oscillations or a high pitch sound from one of the motors. Still a good whoop. Sometimes. Lol
can we use/set different hz elrs configuration on different pid profile in betaflight? lets say profile 1 using 150hz, profile 2 using 250hz profile 3 using 500hz? i mean on the same flight controller
No GNB 27 is a 1mm bullet connector and xt-30 is a 2mm. The GNB is good for around 10A and the xt-30 20A continuous. On these 1s micro's though the xt-30 weighs over double the gnb and the voltage drop is like 1% difference. MuteFPV has a good video with tests comparing them.
@@thirtythreeeyes8624 thanks. that was my impression. not enough performance gain to justify 2mm bullets. even though i run them with out the plastic housing. i'll be switching soon.
Hello, my friend, I have a problem. I did everything you said and it was great. In the last step, I can't connect the drone camera to my HD zero glasses and have an image. What settings should I do? Is it possible through your VTX?
I expected good, what I got was beyond impressive. Only issue I had was the binding until I figured out it doesn’t work with certain packets😝but that’s my fault. As always great work. Thanks Chris!
Sub250 gave me a new FC. But I wonder if it's a pid issue or something. Sometimes the video feed will shake amd when I make a turn it oscillation and that. But when I fly start. Sounds sp quiet. 😫😫😫
I got this frame for $10 with canopy and hardware to swap a Meteor 85 walksnail gear over from. On 1s this quad is a complete dog. Pretty sure Sub250 is Flywoo as well.
Hi. What would you suggest for a beginner(with ELRS)? This one, crux 3, Meteor75pro, mobula7, FireFly16DC, or something else may be and if possible to short describe why? For the fly time, fly performance, camera(analog) etc. Thanks!
Sorry man, had to take that commission back. Quad arrived with a bent USB port that was touching the frame and the company didn’t respond to multiple emails. Had to do a claim with PayPal and they didn’t respond to them either. Just got refunded for it. Really wouldn’t recommend these guys.
Hello Chris, the pole number in your configuration are wrong! the correct pole number is 12 not 14
Can you also make tuning guide for tiny whoops like 31mm and 40mm
Yes, please 🙏🏼
this
yes，please
Urrrp 👍🤝
Yes please 😊
dynamic damping, no pidsum raise, no thrust linear, no throttle expo? hard to believe that you really tuned that drone, when one has watched your previous videos
In case anyone else has flyaway and surging problems with this tune as I eventually did after moving to a humid environment, try turning off the anti-gravity to test if that fixes issue, as it did for me. After that you can add anti-gravity in small increments to find what is optimal for your situation..
I made a 2s hdzero one of these with the 14kv motors. It's awesome on 2s.
Fantastic! Thanks a bunch, Chris! 😊
Stay safe there with your family! 🖖😊
Are you planning to do a test of motors for 7" quads? It will be great.
I teach young children fpv.and been donated from many company's and good friends gal kremmer painless 360 sync fpv and more.had alit of micros .but these look sweet.would love to get a couple of these.great review
What a timing lol, seeing it randomly 52 sec after release
Is there an explanation for setting ESC to 96k for these 1002 motors versus not finding that is best setting for larger 5" prop motors in your earlier study?
i really liked mine but it got ran over lol, its so cool having hd in a whoop.
$289, tell him he's dreamin....
Awesome video. Mine did that as with the motors bought one thinking it was defect. I got a new pid from sub250 because my camera had some shakiness to it. It's better bit I still get oscillations or a high pitch sound from one of the motors. Still a good whoop. Sometimes. Lol
Good review mate, still love the Walksnail system... it makes FPV great again
can we use/set different hz elrs configuration on different pid profile in betaflight?
lets say
profile 1 using 150hz,
profile 2 using 250hz
profile 3 using 500hz?
i mean on the same flight controller
Reminds me a bit of my tinyape freestyle. Really like that thing, runs on 2s which I like because 1s lipo's seem a bit finnicky to me.
Agreed mate 🤝
Your videos are so good 😎😎
Excellent video
I wonder if the GNB 27 is better than xt-30 in terms of performance.
No GNB 27 is a 1mm bullet connector and xt-30 is a 2mm. The GNB is good for around 10A and the xt-30 20A continuous. On these 1s micro's though the xt-30 weighs over double the gnb and the voltage drop is like 1% difference. MuteFPV has a good video with tests comparing them.
@@thirtythreeeyes8624 thanks. that was my impression. not enough performance gain to justify 2mm bullets. even though i run them with out the plastic housing. i'll be switching soon.
The male pins need to be spread with a scalpel occasionally, I still may go back to xt30 but I'm trying 150 & 220 6v caps first...
@@sullytrny Yep, I switched a few whoops over to GNB27 and discovered this a well.
Hello, my friend, I have a problem. I did everything you said and it was great. In the last step, I can't connect the drone camera to my HD zero glasses and have an image. What settings should I do? Is it possible through your VTX?
I expected good, what I got was beyond impressive. Only issue I had was the binding until I figured out it doesn’t work with certain packets😝but that’s my fault. As always great work. Thanks Chris!
I want to know more about this "REDFOX" board, what is it? Where can I buy?
That build does not load on BTFLT 4.5 is target right?
Nice. I sure wish you'd also recommend a set of equipment you need to fly it. Perhaps a cheap and medium set. I'm talking goggles etc.
What motor size should i buy for a 3" APEX build? A RIPPER.
And SUB250 are awesome over there. 😉
PSA: Ordered one of these and it arrived damaged and company has not responded to multiple emails to their Support Dept.
Nice job!! This update to BF4.4 isn't required for the TBS version, NanoFly20, but beneficial for the tuning correct? Time to 'Tango!"
Sub250 gave me a new FC. But I wonder if it's a pid issue or something. Sometimes the video feed will shake amd when I make a turn it oscillation and that. But when I fly start. Sounds sp quiet. 😫😫😫
does this work on the 2S version as well?
I got this frame for $10 with canopy and hardware to swap a Meteor 85 walksnail gear over from. On 1s this quad is a complete dog. Pretty sure Sub250 is Flywoo as well.
That target never worked for me.
Hi. What would you suggest for a beginner(with ELRS)? This one, crux 3, Meteor75pro, mobula7, FireFly16DC, or something else may be and if possible to short describe why? For the fly time, fly performance, camera(analog) etc. Thanks!
Cha-Ching!
Commish coming your way CR
Sorry man, had to take that commission back. Quad arrived with a bent USB port that was touching the frame and the company didn’t respond to multiple emails. Had to do a claim with PayPal and they didn’t respond to them either. Just got refunded for it. Really wouldn’t recommend these guys.
The analog version is ~33g, will it be much fast and fly better?
OMG I just looked at the price 😵
👏👏👏👏👍
run time with HD video is like 1.2 min . hard pass
😂 👍 🤝