Fix a leaky tire bead with no special tools!

[@bsideadventures2180]

I just want say thank you for all you're hard work in law enforcement you are appreciated. Thanks bud

[@MuddyBeards4X4]

Thanks I appreciate that

[@kylancook3477]

Law enforcement?!? That just took the respect factor for this man to a level ten!💪💪

[@ua7pyro591]

Lol

[@eileenwilliams3118]

Thank you for your video, it helped because I didn't have a clue as to what a tire bead was until my tire light came on for the 2nd time and I took it into the dealer. Know I'm very knowledgeable about this process.

[@jayhoss7724]

Will this work if I put bead sealer over a small crack on the rim? Slow slow leak. Or will fix a flat fill the small leak? Rim repair est. $250-$300. Wanna try the cheap way first. Thoughts?

[@robertsimmons5308]

Finally somebody who checked both sides of the wheel. Question, why are you hesitant to use the bead sealer?

[@devo3243]

Bead sealer is great. But good luck getting the tyre off next change

[@ke6bnl]

I like to completely break the bead and clean and use bead sealer( great stuff) and reinflate

[@MuddyBeards4X4]

Yea, I was unable to break the bead, so I had to improvise.

[@nickk4296]

Ok so here is a good way to fix the exact same problem.... air down to about 15psi. With the wheel and tire on the ground take a large sledgehammer and hit the sidewall of the tire as close to the rim as you can. When you do this a short blast of air from inside the tire will shoot out the dirt that is stuck in the bead

[@MuddyBeards4X4]

Nice, 👍🏻. I would be worried about accidentally smashing the rim, lol.

[@screwsnutsandbolts]

Nice job 👍

[@Guitarzan8]

I’m looking for a video to help me through getting a tubeless tire to hold air , not one where everything goes perfect. I’ll try that bead sealer I guess.

[@eliorossi3513]

Hey can we get an update on your wheel spacers. I bought similar spacers 5x4.5 to 5x5.5 to run cj wheels on my lj. Everything was torqued to 100lbs but still makes me nervous. Thanks.

[@MuddyBeards4X4]

I have run them for a year and a half with 40’s. No issues.

[@1stzjtruck706]

Great job and thanks for all you do

[@MuddyBeards4X4]

Thanks man.

[@thomasirwin9561]

Nice job, good info

[@PaulKaiser42]

Winded is what I use because I found it bubbles bigger and faster....just a thought 😃

[@MuddyBeards4X4]

Good to know. I just already had that bottle with soapy water in it sitting on the shelf.

[@rickmarquart3277]

Thanks Kelly! Great job 👍🏻🇺🇸

[@fangxu1923]

thanks a lot

[@tcard2008]

Thanks for the great video! And thank you for your service in law enforcement! What type of bead locks are you running? Are they a diy type? And if so you have a video on doing they? Thanks stay safe out there!

[@MuddyBeards4X4]

Thanks. They are a diy bead lock. I don’t know what brand, I bought them used from Nate.

[@Nicecalgarian]

Thank you 💕🇨🇦

[@amend5269]

Mud in the wheels how did that happen.

[@blissgreenscreens]

Thank you! This was very informative, and I am hoping is going to help me out. Happy New Year!!

[@nicholasbaldwin1674]

Both rear tires are leaking from the bead on my Jeep after airing down a bit to much and going in the sand. Doh! Fact of airing doing and off roading

[@MuddyBeards4X4]

Yep, it happens.

[@TheBeardedJeeper]

Nice 👍 easy fix

[@kylancook3477]

You may not have seen me, but I saw you!

[@MuddyBeards4X4]

😂

[@COFFEE-e3p]

whats that mean ?? just curious mate !!

[@Givebesseygive]

aint never seen a salty ass winter, my beads are destroyed, scale rust 1/16" thick.

[@gransergranser9756]

Thanks but i got low pros

[@danhambrick6331]

I guess Robbie is done making videos?

[@kennethtimmons2942]

German torque specs-goodentight

[@COFFEE-e3p]

YA ES IST SEHR GUT !!

[@toycelica185]

👍🏻